The document summarizes a site visit by a 3rd year architecture student to an MRF tire showroom under construction in Bareilly, India. The student learned about building services like electrical wiring through junction boxes and fan boxes. The site was 3000 square feet surrounded by other buildings, with 40% being constructed for the showroom. The student observed concrete tamping, RCC column and beam framing, placement of rebar, ceiling roses, and wiring throughout the slab to support fans and lights. Electrical services and materials used were found to be properly arranged and suited to their purposes.

1. Site visit
Building Construction and Materials/
Services.
Submitted by-
B.Arch 3rd Year
Invertis University
Bareilly.
Guided by –
AR. Vimal Gupta

2. SITE VISIT BY 3RD YEAR
STUDENT

3. Site - M.R. F
Tyre show room
Location-
Rampur Road,near
Agravanshi Marble,
Bareilly.
REAR VIEW

4. Acknowledgement
We would like to express our special thanks
of gratitude to our teacher AR. VIMAL
GUPTA. And site engineer ER. RAJEEV
SAXENA .
Who gave us the golden opportunity to this
wonderful project on the topic BUILDING
SERVICES , which also helped us in doing
a lot of research and we came to know
about so many new things.
We are really thankful to them.

5. ABOUT SITE
The site is located in Bareilly- Rampur
highway side
The Area of the site is 3000 sq ft.
The site is surrounded by residential
and commercial building.
On the back of the site their was green
belt area.
The construction on site is done for the
MRF showroom.
The construction area on the site was
40% of the total site area(3000sq ft).

6. JUNCTION BOX AND ITS TYPE
JUNCTION BOX

7. FAN BOX AND ITS TYPE
FAN BOX

8. WIRE MESH AND JUNCTION
WIRE MESH
JUNCTION BOX
DISTRUBITION
OFCONNECTION

9. R.C.C.
DIA-10
DIA-
6MM
DIA-
20MM

10. WALL ROSE
WALL ROSE

11. LEARNING
 The purpose of visiting the site was learning
about the building services and the
construction.
 Connectivity of lighting by using fan box and
junction box.
 Tamping of concrete by using vibrator .
 R.C.C. framing of column , beam and slab.
 Placing of transverse and main bar.
 Placing of ceiling rose .
 Arrangement of wiring throughout the slab.
 Placing of different equipment in slab .i.e.,fan
ceiling lights.

12. INFERENCES
• Electrical services are properly
arranged.
• Material used according to need.
• Mezzanine floor was used .
• Wood is used as a low cost material.
• Wood shuttering .

13. THANK YOU