1. ASHISH MALHOTRA
Mobile: 08390903696
E-mail: ashish.r.malhotra@hotmail.com
OBJECTIVE
To pursue a professional career in an organization wherein I can constantly grow with the company,
acquire specific skills at each level with the latest emerging technologies and give my best efforts to work
for overall stability and prosperity of the company.
EXPERIENCE
A result driven professional with 6 years of experience in Control & Instrumentation - Installation, Commissioning,
Maintenance. Completion of Control & Instrumentation Commissioning for Balance of Plant(BOP) Area for
2X300MW Coal based Thermal power Plant and following are the areas covered :
• Water Treatment Plant (WTP) including Pre-Treatment (PT) Plant, Reverse Osmosis
Plant(RO) & Chlorination Plant .
• Fire Fighting System
• Air Quality Management System (AQMS)
• Continuous Emission Monitoring System (CEMS)
• Steam & Water Analysis System (SWAS)
• Auxiliary Cooling Water (ACW) ,Cooling Water(CW) & Cooling Tower System
Previous experience of Control & Instrumentation commissioning of 38MW Coal based Captive Power Plant.
Also knowledge and experience of Control & Instrumentation maintenance which included troubleshooting of field
instruments & Distributed Control System .
PROJECT
Balance of Plant (BOP) Area of 2 X 300MW GMR EMCO ENERGY Ltd, Maharashtra
Job Details
Following are the Job details with the respective areas :
Water Treatment Plant (WTP)
PLC : GE FANUC Rx3i
• Erection & Commissioning of Input Output Panels.
• Cable Laying, termination from Input Output Panels to Electrical drives i.e. Motor Control
Centre(MCC) and Variable Frequency Drives(VFD)
• Cable laying and termination from Input Output Panels to Field Instruments i.e. Pressure
Transmitters,FlowTransmitters,ControlValve,Solenoid Valve,pH Transmitter, Conductivity
Transmitter,ORP Transmitter, turbidity transmitter, Chlorine transmitter, Rate of Flow and
Pressure Switch
1

2. • Review of Instrument Data sheet, Instrument hook up diagram, P&IDs and Instrument Cable
Schedule
• Erection and Installation of Operator Station & Engineering station for DM Section which
includes establishing communication between Input Output Panels and both Engineering Station
& Operator station
• On – site review and modifications in Instrument Cable Schedule, P&IDs as per operation
requirement.
• Commissioning of Remote Input Output Panels in Chlorination & Pre-Treatment Plant and
establishing communication with DM Section Programmable Logic Controller(PLC)
• DM Section Automation includes interlock checking , logic sequence and protection checking of
Micro Grade Filter(MGF) ,Ultra Filter(UF),Reverse Osmosis(RO) and Mixed Bed(MB) Section
• Chlorination Section Automation includes auto sequence check , interlock & protection check of
Evaporator Area and Chlorine toner Area
• Pre- Treatment Plant Automation includes Raw Water Pump House, Rapid Gravity Sand
Filter(RGSF) and pump house
• Performing all the Control & Instrumentation Preventive Maintenance (PM) & Corrective
Maintenance activities in Water Treatment Plant
• Performing calibration of all instruments as per Calibration Schedule updated in SAP and
maintaining the records
• Keeping a record of spares available and maintaining mandatory spares in Water Treatment Plant
Fire Fighting System:
PLC : GE FANUC RX3i
• Erection & Commissioning of Input Output Panels
• Cable Laying, termination from Input Output Panels to Electrical drives i.e. Motor Control
Centre(MCC)
• Cable laying and termination from Input Output Panels to Field Instruments i.e. Pressure Switch,
Pressure Transmitters
• Review of Instrument Data sheet, Instrument hook up diagram, P&IDs and Instrument Cable
Schedule
• Erection and Installation of Operator Station & Engineering station for Fire Water Pump House
Section which includes establishing communication between Input Output Panels and both
Engineering Station & Operator station
• On – site review and modifications in Instrument Cable Schedule, P&IDs as per operation
requirement.
• Commissioning of Remote Input Output Panels in Booster Water Pump House
• Performing all the Control & Instrumentation Preventive & Corrective Maintenance activities in
Fire Fighting System
• Keeping a record of spares available and maintaining mandatory spares in Fire Fighting System
• Performing functional checkup of Fire Protection System and checking it’s healthiness &
operation from PLC on regular basis
Steam & Water Analysis System (SWAS) for Unit 1 & Unit 2:
• Commissioning of all the pH , Cation Conductivity, Specific Conductivity , Dissolved Oxygen
sensors and transmitters for Steam & Water Analysis System
• Commissioning of Silica Analyser,Sodium Analyser, Hydrazine Analyser & Phosphate Analyser
• Commissioning of Data Acquisition System(DAS) for SWAS
• Modbus communication between Data Acquisition system(DAS) & ABB Symphony Harmony
DCS
2

3. • Performing all the Control & Instrumentation Preventive & Corrective Maintenance activities in
Steam & Water Analysis System
• Keeping a record of spares available and maintaining mandatory spares in Steam & Water
Analysis System
Auxiliary Cooling Water (ACW), Cooling Water(CW) & Cooling Tower (CT) System for Unit 1 &
2 :
• Commissioned Auxiliary Cooling Water (ACW), Cooling Water(CW) & Cooling Tower (CT)
System with all the field instrumentation erection commissioning and Digital & Analog signal
hookup with ABB Symphony Harmony DCS
• Performing all the Control & Instrumentation Preventive & Corrective Maintenance activities in
Water (ACW), Cooling Water(CW) & Cooling Tower (CT) System
Continuous Emission Monitoring System (CEMS)
• Commissioned Continuous Emission Monitoring System for Unit 1 & 2
• Communication job completed between CEMS Unit 1 to Control Room & Unit 2 to Control
Room.
• Performing all the Control & Instrumentation Preventive & Corrective Maintenance activities in
Continuous Emission Monitoring System
Air Quality Management System
• Commissioned 3 nos. Air Quality Management System stations
• Wireless Communication between 3 nos. AQMS stations & Central Control Room
• Performing all the Control & Instrumentation Preventive & Corrective Maintenance activities in
Air Quality Management System
Apart from the above C&I Packages knowledge of Air Compressor & Air Dryer Commissioning, Heating, Ventilation
and Air Conditioning (HVAC) .
ACHIEVMENTS;
• Internal Auditor Certification from Bureau Veritas for Integrated Management System(IMS)
• Successfully completed SAP training and complete knowledge of performing Preventive &
Corrective Maintenance, making Purchase Requisition, Purchase Order, Material Reservation
from SAP
• Knowledge of Material Codification for Control & Instrumentation equipments and parts
• Successfully completed Train the trainer Programme about Safety awareness
Company : JAIPRAKASH ASSOCIATES LTD
Job Profile : Worked in the maintanence of 38 MW Captive Power plant as an Instrumentation
Engineer
Job Details :
• Knowledge of Operation of Siemens DCS and also maintaining a record of all the Spares related
to Distributed Control System
• Commissioning of field instruments i.e. Control Valves, Pressure Transmitters,Diffrential
Pressure Transmitters
3

4. • Calibration of all the field instruments and also regular maintenance .
• Trouble shooting of all problems related to DCS for smooth running of the Unit .
EDUCATIONAL QUALIFICATION
• Bachelor degree in Electronics and Communication engineering from Jaypee University of
Engineering and Technology, Guna with an aggregate of 64 %
• Intermediate Schooling (12th
Grade exams) from U.P.K.S.S.V., Kanpur with 68% marks.
• Secondary schooling (10th Grade exams) from Dr. Virendra Swaroop Senior Secondary School,
Kanpur Uttar Pradesh with 73%.
PERSONAL ATTRIBUTES
• Excellent Communication skills
• Proactive, Enthusiastic, Sense of responsibility
• Approaching Situation Systematically and Patiently
• Innovative Thinking & Good team player
PERSONAL DOSSIER
Date of Birth : 26th
April 1986
Permanent Address : 13/337 , Govind Nagar , Kanpur (U.P.)
Languages Known : English, Hindi and Punjabi
4