The HMD / Kontro GSA
Process Pump provides a
versatile range of general-
service pumps designed
to cover wide-duty and
tions. The intrinsic value of the GSA Process
Pump is found in its straight-forward simplicity:
a minimum number of pump models achieved
by maximizing interchangeable components.
A good rule of thumb for specifying the GSA
Pump is found in its name – General Service
Application (GSA). An ASME-standard pump is
available within the GSA product line.
Covering a hydraulic range that is split into three
frame sizes, Frame 0, Frame 1, and Frame 2,
the GSA Process Pump is offered with a range
of Synchronous Magnet Drives, rated to match
prime-mover performance. The frame sizes
and range of drives allow for specification of all
Standard construction of the GSA Pump is
comprised of stainless steel with silicone carbide
internal bearings. Other options of Alloy 20, C,
or B are available upon request. Pumps can be
fitted with standard CSF and Graphite Gaskets
and Viton O-Rings or PTFE Gaskets and PFR
O-Rings. The Stock Depot in Charlotte, NC, is
able to mix and match the interchangeable parts
to fit the specific application.
Standard Temperature Rating is -40°F to 300°F.
Hot Modifications, 400°F and 500°F are avail-
able by applying an Alloy 255 Bushing Holder
and Stainless Steel Cored Outer Magnet Ring
and Ceramic Potted Inner Magnet Ring. 600°F
Hot Modification is also available by applying a
Titanium Bushing Holder, Thermal Spacer, and
Finned External Bearing Frame.
THE STOCK DEPOT: YOUR #1 SAME DAY SOURCE FOR HMD KONTRO EQUIPMENT AND PARTS
1st Quarter 2015
The Kontro Quarterly Editor:
Brent Keeter, Inside Sales /
Stock Depot Manager –
Chris Barker, Service Manager
Andy Diggs, General Manager
Neal Mann, President
The Stock Depot
2311 Executive Street
Charlotte, North Carolina 28208
P.O. Box 668525
Charlotte, NC 28266-8525
704-399-8700 • 800-872-8414
IN THIS ISSUE
The HMD Kontro GSA Process Pump
Outer Magnet Ring Cheat Sheet for
GT and GSA Frame 0 Pumps
CHANNEL PARTNER SPOTLIGHT
Oliver Equipment Company
Kontro Quarterly Salute
Consult with The Stock Depot to find the GSA Process Pump that meets
your particular general-service application.
Hope you enjoy
the different size
GSA Process Pump
The HMD Kontro GSA Process Pump
• Simplicity, Efficiency, Value •
GSA Process Pump Features:
• Sealless design for total product containment
• Ideal for handling hydrocarbons, as well as
toxic, aggressive, hot, and / or valuable product
• Conforms to ASME Standards
• Modular high-efficiency wet ends
• Designed to ensure maximum flow / head coverage
across all ranges
• Choice of various metallic construction materials
• One fully-contained casing / containment shell / gasket
GSA Process Pump Specifications - on next page.
Cartridge Assemblies and Service Kits are recom-
mended spares for GSA Process Pumps, all of which
are readily available through The Stock Depot.
Outer Magnet Ring Cheat Sheet
for GT and GSA Frame 0 Pumps
CA-1 7/8” Bore 143 / 145TC
CA-2 1-1/8” Bore 182 / 184TC
CA-3 1-3/8” Bore 213 / 215TC
CA-4 1-5/8” Bore 254 / 256TC
CA-5* 1-5/8” Bore 254 / 256TC
The chart above will aid in the selection of motor frame size that should closely
match the pump with motor adaptor and correct OMR.
*CA-5 for GSA Frame 0 Pumps only
GSA Process Pump Specifications:
Flow Rate 1419 GPM
Head 485 FT
Minimum Temperature -40°F (-100°F on request)
Maximum Temperature 500°F (600°F w/ Engineered Option)
Pressure 274.7 PSI
Viscosity Maximum 200 cSt
Solids Capability Maximum of 5% w / w less than 150 microns
Speed Range 1750 & 3500 RPM
Industry Standards ASME / ISO
Maximum Motor Size 125 HP
Standard Materials 316 Stainless Steel, Alloy 20, Alloy C
Number of Available Hydraulics 33
The HMD Kontro GSA Process Pump (continued)
Liquid Handling Equipment, Inc.
Oliver Equipment Company (OEC)
Formed in 1975 by Gale Oliver and Ron Laughter as Oliver & Laughter Equipment Company, the company
changed its name to Oliver Equipment Company after the 1990 retirement of Ron Laughter and later
relocation of its home office in 1997.
Proudly representing Sundyne API
and Sunflo Pumps since 1975, OEC
became the HMD / Kontro distributor
for South Texas in 1993. The OEC
home office and service center are
located in Houston, Texas, with satellite
offices in Corpus Christi, Beaumont,
and Lake Jackson. Currently, the
company consists of 36 employees.
OEC serves as an Authorized Service
Center for all of the products it repre-
sents, with the exception of Dresser
Rand steam turbines. OEC aftermarket
• Factory Trained Personnel
• 24 / 7 Call-Out Service
• Locally Stocked Parts
• Performance Testing of Pumps
• Dynamic Balancing of Components
• OEM Tolerances and Specifications
• Engineered Conversions
• Comprehensive Repair Reports
An LNG export terminal facility on the Texas Gulf Coast was in need of a Positive Displacement Diaphragm
pump for a Loading Arm application. When loading barges with the Liquid Natural Gas, it was necessary to
completely evacuate the LNG in the loading arm. The remaining LNG was then pumped back into the tank
via the PD pump.
OEC determined that the Positive Displacement Pump was not the best choice for the LNG applications
because of low NPSHa and high pulsations. OEC introduced the HMD / Kontro LMV-801S (API certified)
pump and was able to sell the low NPSHr - no seals, no seal support systems, no cooling water required.
With a tight project schedule, HMD / Kontro provided two pumps in 16 weeks. A third pump was later
added to the order because of the efficiency and small footprint of the HMD / Kontro LMV-8015 pump.
To learn more about Oliver Equipment Company, visit the company’s Website at
OEC also offers Field Engineering Support to provide Equipment and
System Troubleshooting, Installation Reviews and Start-Up Assistance,
Maintenance, Engineering, and Operator Training, as well as Engineering
Design Review of chronic “bad-actor” equipment.
With OEC since 1998, Pete Koinis, OEC Service Manager, spent one
year with HMD / Kontro before becoming a Field Service Engineer for
Sundyne. For the past four years, Pete has focused on the HMD / Kontro
With a roster of other dedicated employees that range from Eddie
Boykin, Lead Mechanic to Cindy Bonura who oversees Sizing and
Quoting, to Steve Schott, Tab Taylor, Chase Griffin, and Vince Sicola,
expert OEC salesmen with over two decades of hands-on HMD / Kontro
knowledge, OEC carries the day in providing in-depth expertise as it
proudly represents and services HMD / Kontro equipment.
Liquid Handling Equipment, Inc.TheKontroQ arterly
The Stock Depot at Liquid Handling Equipment, Inc. • Office: 704-399-8700 • Toll Free: (800)-872-8414
Cell: 704-460-6432 • Fax: 704-393-2412 • Email: firstname.lastname@example.org
From the Editor: We’re off to a great start in 2015!
Here’s an enticing deal to keep the momentum going this year...
Don’t forget when you purchase GT and GSA Pumps, Frame 0 through Frame 2, from
The Stock Depot, you will receive a .70 multiplier discount off list prices. When buying
CS1C, CS1D, and CS2D Model Pumps, you will still receive .75 multiplier discount off list
prices. And, there’s more good news, you will receive the standard .75 multiplier discount
on all spares brought through The Stock Depot.
I’ll leave you with this quote from Dan Pelon: “Why buy a pump that leaks?”
Remember…Service Sells Pumps!
Very truly yours,
The Kontro Quarterly Salutes Diane Allan
Recently promoted to Senior Logistics Coordinator, Diane Allan
has been part of the HMD Kontro family for over 11 years. Diane began
her successful HMD career in production control, helping out in the shipping department,
until she advanced to Shipping Administrator.
It was a fitting first placement because Diane had a total of 16 years of pump-industry
shipping experience, now calculated at 27 years since joining HMD Kontro in 2004!
She loves working in the shipping department because there is always a unique situation
to handle, whether it’s dealing with external or internal customers or Customs Officials in
the UK or worldwide or different kinds of projects or letters of credit or numerous and sundry problems.
Diane boasts, “Shipping logistics certainly keep my work days varied and busy!”
On a personal level, Diane loves to shop, celebrate holidays, and spend lots of off-time
with family and friends. Family is key with most of her time spent with her husband Dave
and their two children, Lauren 20 and Kai 16. A constant houseful of kids and friends
keeps Diane young and happy!
Diane also enjoys the sense of family at HMD Kontro. She happily reports that she feels
privileged to work with such a great bunch of people.
The Kontro Quarterly proudly salutes Diane Allan as one of the many hard working,
dedicated, passionate HMD Kontro employees. We feel very fortunate that she is part
of the HMD Kontro team!