1. CATEGORY ELEMENT CODE TMU MOTION
SEQUENCES
Obtain Match & Get 2 parts Together MG2T 76 G.G.P.G.G
and Match & Get 2 parts Separately MG2S 107 G.P.G.P.G.G
Match Match parts to FOOT (without obtain) FOOT 38 P.F
Part or Match & Add Part with 1 hand (Easy) MAPE 50 G.P.G
Parts Match & Add Part with 1 hand MAP1 56 G.P.G
Match & Add Part with 2 hands MAP2 69 G.P.G.P.G
Aligning Align and Match 2 parts AM2P 61 G.G.P.G
And Ajust 1 part (Top) AJPT 43 G.P.G
Adjusting Align & Reposition assembly under foot ARPN 75 G.P.G.P.F
Align or adjust part (s) by pushing or sliding APSH 24 G.P
Forming Form fold FFLD 43 G.P.G
Shapes Form crease in folded part FCRS 28 G.G.W.P.P.W
Form unfold or layout FUNF 23 G.P
Triming Trim-cut with scissors (1st) TCUT 50 G.P.P.P
and Tool Trim-cut with scissors (Additional) TCAT 25 P.P
Use Trim-cut thread with fixed blade TBLD 33 G.P
Trim-dechain parts with scissons TDCH 49 G.P.P.P
Asiding Aside-push away (sliding) APSH 24 G.P
Aside part with 1 hand AS1H 23 G.P
Aside part with 2 hand AS2H 42 G.G.P
Handling Machine sew 1cm approx greater 1 cm MSIA 17 F.F
Machine Machine sew 1cm accurately within 1 cm MSIB 26 F.PB.F
Machine sew 1cm precisely within 1/2" cm MSIC 37 F.PC.F
Machine handwheel to raise/lower needle MHDW 46 G.P.G.P.G
Machine back tack at beginning (lever) MBTB 34 G.P.P.P.G
Machine back tack at end(lever) MBTE 37 G.P.PT.P.P.G
Get and Get part with 1 hand (Easy) GP1E 14 G
put data Get part with 1 hand GP1H 20 G
Get part with 2 hands GP2H 33 G.G
Get part contact only GPCO 9 G
Get part from other hand GPOH 6 G
Get part by adjusting grasp GPAG 10 G
Put part to approximate location PPAL 10 P
Put part to other hand PPOH 6 P
Put part PPST 14 P
Put part locate once PPL1 27 P
Put part locate twice PPL2 47 P.P
Additional Foot or short leg motion F 9
MTM Pace or step to move body P 18
Elements Bend (and arise) B 61
Bend Down BD 29
Arise from bending AB 32
Sit SIT 35
Stand STD 44
Eye action (simple binary checks) E 7
Crank C 15
Regrasp R 6
Apply pressure A 14
NIL A straight burst on a single ply 1.00 N
LOW A straight, non-visible seam (ie, not L
having an appreciable affect on the 1.10
final appearance of the product)
MEDIUM A straight visible seam or a curved 1.20 M
non visible seam
HIGH A curved visile seam or a seam 1.40 H
worked in a confined space
CODE TOLERANCE FACTOR DESCRIPTION
A GREATER THAN 1 CM 0 STOP LONG A SEAM OR
RUN OFF
B WITHIN 1 CM 9 STOP FOR A NON-VISIBLE
BACKTACK
C WITHIN 1/2 CM 20 STOP TO CHANGE DIRE
-CTION (NEEDLE PIVOT)
OR TO FORMA VISIBLE
BACKTACK
GENERAL SEWING DATA LIMITED