During the Process of Upgrading and Configuring the Server you may find multiple Issues, So in this Presentation we have describe some common SAP Business One Integration Problems & their Solutions in DI Server, DI API & B1WS. If you faced any problem you can check its detail in this blog. http://bit.ly/b1-connect-problems
2. PROBLEMS
UNABLE TO CONNECT TO SBO-COMMON
UNKNOWN HOST
WRONG BLI PASSWORD / 8.81 : INTERNAL ERROR (500)
1000000013 – WRONG B1I LICENSE OR 100000048 – NO SAP LICENSES
103 FAILED TO CONNECT
8012 COMPANY VERSION MISMATCH
CONNECTION REFUSED TO HOST: XXX-XXX-XXX-XXX /
AN EXISTING CONNECTION WAS FORCIBLY CLOSED BY THE REMOTE HOST
COM.SAP.B1I.ADAPTER.DIA.EXCEPTION.CONNECTIONFAILEDEXCEPTION:COM.SAP.SMB.SBO.API.SBOCOMUTIL
ERROR HTTP 404 NOT FOUND/FILE NOT FOUND
“THE IPO-STEP TO CREATE A CACHED AUTHENTICATION CONFIG-NODE FOR IS NOT KNOWN”
HTTP 403 FORBIDDEN – XCL198 HTTP ACCESS CURRENTLY NOT ALLOWED
FROM REMOTE CLIENTS, AS B1IP RUNS IN LOCAL-MODE OR SAFE-MODE
HTTP 500 – INTERNAL ERROR
ACTION CANCELLED
INSTALL SAP BUSINESS ONE INTEGRATION SERVICE BEFORE ENABLING THE DASHBOARD WIDGET
THE REQUEST DASHBOARD DOES NOT EXIST.
2032 CONNECTION TYPE: XML DATA (CANNOT ACCESS EXTERNAL DATA)
NO COMPANY DATABASE APPEARS IN THE SLD
WHAT IS THE USERNAME AND PASSWORD FOR EXPLICIT AUTHENTICATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
3. UNABLE TO CONNECT TO SBO-COMMON
CAUSE
SOLUTION
This is a network issue which happens when the SERVER Name
that has been used for connection is not configured in the local
network, or the configured machine is turned off.
To solve this issue, it is recommended to use the IP address of
the server. Even though the logical name can be used, but it is
recommended to use the same string that has been used in the
EventSender setup. Before doing setup, it is also recommended
to check the network configuration.
1
5. WRONG BLI PASSWORD / 8.81 : INTERNAL ERROR (500)
CAUSE
SOLUTION
This error is caused when incorrect password is used and the re-
quest is unauthorized.
The B1i password must be setup and changed in SAP Business
one. In case of any further isse, reset the B1i Password and test
again.
3
6. 8012 COMPANY VERSION MISMATCH
4
CAUSE
SOLUTION
There is a mismatch between the DI, SBO-Common and
Company database versions.
To solve this problem follow the steps below:
1. Start è Programs è Run, Type %temp%.
2. A temporary folder will open, delete / rename SM_OBS_DLL folder here.
3. Select SAPBobsCOM.dll è Go to properties. Ensure the Version is 8.8 PL 12 or higher.
4. SBO –Common : Query to the database table SINF using the following SQL Statement
“select Version from SINF”, ensure the version is 880230 and patch level is 12 or higher.
5. If there is any decrepancies in this, run SBO-Common upbrader from PL12 or higher again.
6. In the company db, query using the following SQL Statement.
“select Version from CINF” and ensure the version is 880230 or higher.
7. 103 FAILED TO CONNECT
5
CAUSE
SOLUTION
Incorrect company selected or company is not upgraded.
Ensure the company field is ok and correct database is used. Also
ensure the database has been upgraded to the correct patch.
The database that is installed when you install B1iC is called B1if.
This is not a normal SAP Business One database so should
update the SLD to actual SAP B1 database name.
8. 1000000013 – WRONG B1I LICENSE
OR 100000048 – NO SAP LICENSES
CAUSE
SOLUTION
Licence not exists or not been assigned to the B1i user.
6
Ensure the licences B1iINDIRECT_MSS and B1i have been as-
signed to B1i user.
9. CAUSE
SOLUTION
This happens when there is a problem with diProxyHost or
diProxyPort.
In the diProxyHost, replace the computer name with the ma-
chine’s IP address and add this IP to PROXYHOME entry in the
diProxyServer.properties file which resides in Drive:Program
FilesSAPSAP Business One IntegrationDIProxy on the same
server where SAP is installed. On the contrary, if the DIProxy is
located on different machine, Ensure port 2099 is exempted in
the Firewalls and also DI Proxy service is started.
7
CONNECTION REFUSED TO HOST: XXX-XXX-XXX-XXX /
AN EXISTING CONNECTION WAS FORCIBLY CLOSED BY THE REMOTE HOST
10. CAUSE
SOLUTION
The JCO path is not correctly set in the diproxyServer.Properties.
Locate the Java Connection for SAP Business One DI API (default
path is C:Program FilesSAPSAP Business One DI APIJCOLIB).
Enter this patch with double back-slashes in the JCO patch of
the diproxyserver.properties file (default patch is C:Program
FilesSAPSAP Business One IntegrationDIProxy).
8
COM.SAP.B1I.ADAPTER.DIA.EXCEPTION.CONNECTIONFAILEDEXCEPTION:
COM.SAP.SMB.SBO.API.SBOCOMUTIL
11. 9
CAUSE
SOLUTION
Localhost is used when configuring B1i Server Address.
Change the localhost in the B1i Server address with the IP Ad-
dress assigned to that machine or even the Server name used for
Local network connectivity.
To do that:
Open the Integration Framework Maintenance è Cfg Runtime,
and change the corresponding setting.
HTTP 403 FORBIDDEN – XCL198 HTTP ACCESS CURRENTLY NOT ALLOWED
FROM REMOTE CLIENTS, AS B1IP RUNS IN LOCAL-MODE OR SAFE-MODE
12. ERROR HTTP 404 NOT FOUND/FILE NOT FOUND
10
CAUSE 1
SOLUTION
The user manager is used instead of B1i user.
Ensure the user B1i is used during setup and
connection in the SLD and the B1i user has been
correctly set up in SAP Business One.r manager
is used instead of B1i user.
CAUSE 2
SOLUTION
There is an SQL server instance name.
If you are using an SQL named instance make
sure each instance uses a different TCP/IP port
and, during the installation of the integration
component, enter the server name as <server
name> rather than <server name>instance
name.
Note: PL08 and higher will provide regular sup-
port for named instances
CAUSE 3
SOLUTION
The IPO user was deactivated.
Go to B1iP Control Center è Configuration è
User Admin IPO-Steps – Toggle Activation for
user B1iadmin and B1ipeer. Restart the Integra-
tion server and Event Sender service and retry.
CAUSE 4
SOLUTION
The Proxy host was configured in the Event
Sender set up.
On Step 3/5 of the Event Sender set up ensure
you do not configure Proxy Host or the Proxy
Port.
13. ERROR HTTP 404 NOT FOUND/FILE NOT FOUND
11
CAUSE 5
SOLUTION
SQL Server/Tomcat Services have not been
started.
Ensure SQL Server//Tomcat Services are started:
Click Start è Control Panel è Administrative Tools
è Services
Locate the service name SQL Server (MSSQLS-
ERVER) / Tomcat and ensure they are started
CAUSE 6
SOLUTION
Https Port 8443 is being used by another
program.
Open https://localhost:8443 using the browser
and ensure it is the home page of Apache
Tomcat. If not, the 8443 port is occupied by an-
other program. Disable the other program that is
using port 8443 or assign another port to the
other program.
CAUSE 7
SOLUTION
The dashboard is not deployed correctly in B1ic for the selected company or may have encountered an
error.
Ensure the correct company database appears in the SLD. Deactivate and re-activate the dashboard in
SAP Business One’s General Settings.
Check the Message Log in the Integration Framework -> Monitoring for errors (Failure) connected to
“Sender Trigger / Object” “500” (event to create SLD entry) or “120000008” (event to deploy dashboards)
Check the Queue Monitor in the Integration Framework è Monitoring for pending processes – after in-
stallation / upgrade some post-installation processing time may be required (depending on various fac-
tors up to 2 minutes per B1 DB on slow systems)
Go to the B1iP Control Center è Maintenance è IPO-Step Status and check “Deactivated steps only to
check whether any processes are halted. If so, the relevant error may be displayed – giving a hint for
details that require fixing. Activate the deactivated steps – and press “Refresh” to see whether the steps
can successfully be reactivated.
14. CAUSE
SOLUTION
The dashboard is not deployed correctly in B1ic for the selected
company or may have encountered an error.
Ensure the correct company database appears in the SLD. Deactivate
and re-activate the dashboard in SAP Business One’s General Settings.
Check the Message Log in the Integration Framework -> Monitoring
for errors (Failure) connected to “Sender Trigger / Object” “500” (event
to create SLD entry) or “120000008” (event to deploy dashboards)
Check the Queue Monitor in the Integration Framework -> Monitoring
for pending processes – after installation / upgrade some post-installation
processing time may be required (depending on various factors up to
2 minutes per B1 DB on slow systems)
Go to the B1iP Control Center è Maintenance è IPO-Step Status and
check “Deactivated steps only to check whether any processes are
halted. If so, the relevant error may be displayed – giving a hint for
details that require fixing. Activate the deactivated steps – and press
“Refresh” to see whether the steps can successfully be reactivated.
12
HTTP 500 – INTERNAL ERROR
15. 13
“THE IPO-STEP TO CREATE A CACHED AUTHENTICATION
CONFIG-NODE FOR IS NOT KNOWN”
CAUSE 1
SOLUTION
Installation did not install the systems in the
System Landscape directory.
Run the EventSender setup. Or detach the data-
base from SQL Server Management Studio. Re-
fresh company list and attach the database once
again in SQL. Click refresh in the Choose Com-
pany window in SAP Business One.
CAUSE 2
SOLUTION
Scenario has not been activated
Open the Integration framework è Scenarios è
Scenario Package Control. For the sap.Xcelsius
click Activate.
CAUSE 3
SOLUTION
Changes made without restarting.
If changes are made ensure Integration Service
and Event Sender are restarted.
CAUSE 4
SOLUTION
Internal functions / IPO steps may have been
“deactivated”.
Go to the B1iP Control Center -> Maintenance
-> IPO-Step Status and check “Deactvated steps
only” to check whether any processes are halted.
If so, the relevant error may be displayed –
giving a hint for details that require fixing.
Activate the deactivated steps – and press
“Refresh” to see whether the steps can success-
fully be reactivated.
16. ACTION CANCELLED
14
CAUSE 1
SOLUTION
SAP Business One integration service may be stopped.
Ensure the SAP Business One integration service is running. Stop and start the
service and retry.
CAUSE 2
SOLUTION
Port 8080 is being used by another program
Open http://localhost:8080 via the browser and ensure it is the home page of
Apache Tomcat. If not, the 8080 port is occupied by another program. Disable
the other program that is using port 8080 or assign another port to the other
program.
Note: From B1iC 8.81 PL05 to change the port you should follow the instruc-
tions in the AdministrationGuide_Integration_Component section 2.7
17. 15
CAUSE
SOLUTION
You will receive the prompt “The server xxxx at B1iP-
_ipo_/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.run-
time/INB_HT_CALL_SYNC_XPT.ipo/proc requires a username
and password”.
If this occurs in SAP Business One you should restart the SAP
Business One client.
WHAT IS THE USERNAME AND PASSWORD FOR
EXPLICIT AUTHENTICATION
18. 16
THE REQUEST DASHBOARD DOES NOT EXIST.
CAUSE 1
SOLUTION
Cockpit not activated correctly
1. Deactivate the cockpit in your Business One database – Disable My Cockpit and also disable cockpit in
General Settings
2. Run EventSender Setup (in first step try to avoid using localhost or IP addresses), in third step press
Test Connection, in fourth step make sure that your database is checked, press also Receiver button and
then Test Connection. Finish EventSender setup.
3. Click on SLD in the B1i Framework and ensure connection to the Company database (B1DI and JDBC)
is successful.
4. Go back to B1i Framework UI, click Scenarios in upper menu, then select Control in left menu and
(re)activate Xcelsius scenario.
5. Restart EventSender service, Integration Service and Proxy services via Services (Computer Manage-
ment)
6. Now you can enable cockpit in your Business One database – enable cockpit in General Settings and
then enable My Cockpit.
CAUSE 2
SOLUTION
After installation of B1ic, the company is not listed in the SLD
Delete all entries of table SLSP and SLSPP in SBOCOMMON. Restart integration service. In SAP Business
refresh the company list.
Dashboard: /com.sap.b1.dashboards/0010000100.sap_dashboard_001.dab001/default.html
If this dashboard is newly imported, ensure that the SAP Business One EventSender Server has been
started; then wait for several minutes and try again.
19. CAUSE
SOLUTION
Previous Tomcat/B1ic installation exists.
Remove the Integration component and any Tomcat deployment
before you upgrade/reinstall again.
17
INSTALL SAP BUSINESS ONE INTEGRATION SERVICE BEFORE
ENABLING THE DASHBOARD WIDGET
20. CAUSE
SOLUTION
Company database does not exists or not created through
installation process.
De-activate and re-activate the sap.B1System scenario
(B1i Framework UI, click Scenarios in upper menu, then select
Control in left menu).
18
NO COMPANY DATABASE APPEARS IN THE SLD
21. 19
CAUSE
SOLUTION
Problem is when the current access user cannot access the file
for storage. It could be because of Cross Domain policy setup
which restricts the current user to access the file.
Start “Server Manager”è Under the “security information section,
click on the Configure IE ESC” link and Turn off for
Administrators.
2032 CONNECTION TYPE: XML DATA (CANNOT ACCESS
EXTERNAL DATA)
22. www. .com
We Connect.You Grow.
World’s easiest solution for connecting your
E-Commerce Stores,Marketplaces and CRM
with ERP!