EVERYTHING FOR QUICK DIE CHANGE AND DIE CLAMPING TECHNOLOGY FOR PRESSES.

1. ROLLBLOC HYDRAULICS
Positioning of Clamps in T-Slot
The flexible ROLLBLOC Hollow
Piston Clamps and ROLLBLOC Sliding
Clamps can be used in a wide range
of applications.
The associated park stations (die
change) are set up on hydraulic
distributor plates. They can be
optionally equipped with a non-
return valve.
Stationary Mounted Die Clamps
When using die subplates, ROLL-
BLOC Clamping Bar and ROLLBLOC
Wedge Clamps offer an additional
rationalization potential as the
clamping system can be fully auto-
mated.
320
80
Pumpe ein gespannt gespannt gespannt
Kreis 2
lösen
spannen
Kreis 1
lösen
spannen
Störung
Kreis 3
lösen
spannen
Hydraulic clamping system
Hand pump for hydraulic
ROLLBLOC Die Lifters.
Operating pressure 40/80 bar.
Accessory kits for the die lifter
hydraulic network.
ROLLBLOC-
Hydraulic unit
Operating pressure 400 bar
for clamps and 40 or 80 bar
for supplying ROLLBLOC Die
Lifters.
Valve sets
Single-circuit or dual-circuit for
ROLLBLOC clamps. They can be
secured on a mounting plate for
the clamps in the press ram.
ROLLBLOC Hollow Piston Clamp
ROLLBLOC Sliding Clamp
ROLLBLOC Clamping Bar
ROLLBLOC Wedge Clamp
FAST, SAFE AND RELIABLE
DIE CHANGING
& CLAMPING
New Design
Güthle Maschinenbau GmbH & Co.
Gottlieb-Haefele-Strasse 9
73061 Ebersbach
GERMANY
Phone: 0049 7163 99090
Fax: 0049 7163 990990
E-mail: tech-info@guethle-swt.de
www.guethle-swt.de
For further information please
request our detailed ROLLBLOC
Product and Ordering
Catalogue.
With our DILOS Range which
includes products such as
the DILOS Swing Sink Clamp,
DILOS Shuttle and DILOS Truck,
we offer versatile options for
automated die change opera-
tions.
Please request our DILOS
information material.
Your component and systems
supplier for rational die change
Subjecttomodifications•PP41E•WerbeagenturStraub•
ROLLBLOC-
HYDRAULIC QUICK-ACTION CLAMPS FOR PRESS BED AND RAM

2. Overview of all ROLLBLOC Die Loading Arms
CT06
CT10
CT02
CT04
CT06
CT10
CT02
CS04
CA04
CD04
CT04
CS06
CA06
CD06
CT06
CT10
CK00
CS01
CA01
CD01
CK01
CS02
CA02
CD02
CK02
CT02
CK03
CS04
CA04
CD04
CT04
CS06
CA06
CD06
CK00
CS01
CA01
CD01
CK01
CS02
CA02
CD02
CK02
CK03
CS04
CA04
CD04
CS06
CA06
CD06
CK00
CS01
CA01
CD01
CK01
CS02
CA02
CD02
CK02
CK03
Load
bearing
capacity
5 kN
10 kN
20 kN
30 kN
40 kN
60 kN
100 kN
Die loading arms type
Die loading arms working radius
500 mm 800 mm 1000 mm 1250 mm 1600 mm 2000 mm
ROLLBLOC DIE CHANGING
TECHNOLOGY
ROLLBLOC Die Lifters for DIN 650 T-Slots
These die loading arms make for a
safe and reliable transfer station for
dies that are transported with the
aid of a crane or stacker truck. The
needle bearing-mounted load carry-
ing rollers of the ROLLBLOC Die
Loading Arms ensure smooth, linear
movement of the die from and
onto the press bed.
There is a choice of different types
of swivel action and swivel direc-
tion depending on the working
radius, overall width between the
die loading arms and the press
configuration.
E
Fixed mounted ROLLBLOC Swivel Die Loading Arms
ROLLBLOC Die Loading Arms and
ROLLBLOC Die Loading Arms with
prop supports can be attached in
the fixed mounting hooks only
when required. These die loading
arms can therefore also be used on
several presses.
Portable ROLLBLOC Die Loading Arms with mounting hooks
Spring force version
The load carrying elements, i.e. ball
or roller, are individually supported
by springs. The load carrying ele-
ments are 'lowered' by the clamp-
ing action of the die.
CS 01/02
CD 01/02
CA 01/02
CK 02/03
CT 06/10
Hydraulic version
ROLLBLOC Ball-Type Die Lifters
generate the load bearing and
lifting function at 40 bar and the
ROLLBLOC Roller-Type Die Lifters
at 80 bar operating pressure.
The hydraulic system of the press
can be used for this purpose – or
a ROLLBLOC Hydraulic Unit or
the ROLLBLOC Pump for manual
operation.
Dies can be moved effortlessly and
positioned precisely on the ball-
or roller-mounted load carrying
elements by one person.
Load bearing capacity
per load carrying element (kN)
18
22
28
36
T-slot
DIN 650
Ball-type die lifters
Spring Hydraulic
Roller-type die lifters
Spring Hydraulic
0.25
0.4
0.64
1.0
0.5
0.8
1.25
2.0
0.5
0.8
1.25
2.0
1.0
1.6
2.5
4.0
453860
1410
1538
690
220
1400
105
750
ROLLBLOC BUGGY 20
Rational die change and transport
operations with the electrically
driven die change lift-truck that has
been specially developed for press
and punch dies.
A safe and reliable clutch system
ensures fast and effortless die trans-
fer between the press bed and the
load carrying forks of the BUGGY.
The transport safeguard is locked
and released automatically by this
clutch system.
ROLLBLOC Interchangeable
Subplate Technology
The use of interchangeable plates
is ideal for different sized dies.
The dies are prepared and set up
outside the press thus allowing
production to continue.
ROLLBLOC Interchangeable Sub-
plate Technology opens up new
options of profitably producing
even small batch sizes as well as
express orders for customers in
a hurry.
TRIED AND TESTED PRECISION FOR MAXIMUM LOADS AND FUNCTIONAL RELIABILITY
ROLLBLOC Die Loading Arms with a load bearing capacity from 5 to 100 kN