1) SUNDAY, OLanrewaju Joel is a dynamic project engineer with over 5 years of experience in project management, procurement, and quality assurance.
2) He has professional memberships in several institutes and associations related to project management, supply chain management, and engineering.
3) He holds multiple online diplomas and certificates in areas like project management, systems engineering, workplace safety and health, and international trade from institutions like Alison Online Training.
1. Page | 1
SUNDAY, OLanrewaju Joel ,ACIWM,ACISM,MNISET,IPMA.
________________________________________________________________________________________
Address: 7 Eddy Street,Ipamesan,Sango ,Ogun State, Nigeria . Mobile: 08060659455, 08090621330.
Email: sunday_olanre@yahoo.com, sundayolanre@gmail.com
Career Profile
Dynamic, result-oriented and skilled Project Engineer with over five years proven success record
and experience, motivated achiever who guides organizations in applying technology to business
settings, provides added value, and creates project deliverables in a timely manner.
Professional Membership
Associate member of the Chartered Instistitute of Supply Chain Managemant,Ghana.
Associate member of the Certified Institute of Warehousing and Materials Managemant,Nigeria.
Corporate member of the Nigerian Society of Engineering Technicians,Nigeria.
Certified Member of the IntenationalProject Management Association,UK.
Membership of the Council for the Regulation of Engineering in Nigeria in View.
ProfessionalTraining
PM-Partners Group,United Kingdom. 2014
Project Management Professionals.
Crownpoint Management Consult 2014
Certificate in International Trade and Export Managemant.
Offshore Safety training Center ,Trans-Amadi Portharcourt. 2013
Basic Offshore Safety Induction and Emergency Training(BOSIET).
Alison On-line Training 2013
Diploma in Workplace Safety and Health.
Alison On-line Training 2013
Diploma in Project management.
Alison On-line Training 2013
Certificte in Systems Engineering
2. Page | 2
Education
PGD. Logistic & Supply Chain Management(Upper Credit ) 2014
College of Supply Chain Managemant, Ghana.
BSc. Electrical & Electronics Engineering(GPA:3.21/5.0,2nd Class Lower ) 2008-2013
University of Lagos, Akoka,Yaba,Lagos State.
BSc. Architecture(GPA: 3.65/5.0,2nd Class Upper). 2007-2011
Olabisi Onabanjo University,Ago-Iwoye, Ogun State
OND Electrical &Electronics Engineering (GPA: 3.67/4.0,Distiction) 2003-2006
Lagos State Polytechnic, Ikorodu Lagos.
OND Architecture(GPA:3.43/4.0,Upper Credit). 2004-2006
Lagos State Polytechnic, Ikorodu Lagos.
Senior School Certificate 2002
National Examinations Council
Work Experience
DBH SOLUTIONS LTD,
Victoria Island, Lagos.
Position:-Project Analyst II/Contract Administrator (January 2015-Till Date)
Job Description
Proposal Management:
Review the request for proposals (RFP) submitted from the client ensuring that it is progressed
through the RFP lifecycle.
Obtain assistance from other departments (Engineering, Administration, Finance, etc.) as
required to prepare the proposal plan that meets the objectives of the proposal budget and
timeline.
Clearly define the requirements and Scope of Work offered to the client and identifies any
clarifications or exceptions to the client’s request.
Ensure utilization of approved company vendors and OEMs, requesting costs if necessary to
complete the request for proposal (RFP).
Primary responsibility for preparation/review of the proposal write-ups
Submit proposals within the required timeframe, ensuring follow-up within 3 days of
submission.
Obtain feedback from projects for “lessons learned” to incorporate in future proposals.
Prepare initial assessment of the technical, financial, schedule or any other unusual risks
associated with a proposal
Project Procurement:
3. Page | 3
Prepare and review purchase orders in order to verify accuracy,terminology, and specifications
and send copies to OEMs
Placing orders with our OEMs, tracking and following up on progress through to delivery.
Respond to queries about order status, changes, or cancellations
Ensuring that all orders placed with the OEMs meet the required standard for the project.
Determine if inventory quantities are sufficient for the RFP; liaise with Logistics to order
required materials when necessary.
Project Management:
Perform a key role in project planning, budgeting, and identification of resources needed
Preparation of the project schedule and plans
Monitor and track project milestones and deliverables and make revisions as and when the need
arises.
Develop or update project plans for projects including information such as projectobjectives,
technologies, systems, information specifications, schedules, funding, and resourcing.
Prepare project status reports by collecting and analyzing information from all lead engineers
ensuring that the weekly report sent out to the client is accurate and timely
Ensure project documents such as high level project plans, SOWs, Change Request Form are
completed and signed by all parties where needed.
Identify the elements of project risks that are likely to give rise to disputes and claims and ensure
such is communicated to the management.
Obtain feed back from projects for “lessons learned” to incorporate in future proposals.
Oversee the project from start to finish.
Manage project execution to ensure adherence to budget, schedule, and scope
Quality Assurance
Action and close all customer complaints timely.
Ensure all work meets or exceeds the contract specifications and standard of excellence of the
company.
Coordinate all QA/QC activities with the site manager and ensure that quality assurance reports
are submitted weekly.
SAFETY CONSULTANT& SOLUTIONS PROVIDER LTD,
Gbagada, Lagos.
Position:-Project Analyst/ Engineer (May 2014-December 2014)
PROJECT ANALYST
Job Description
Review the request for proposals (RFP) submitted from the client ensuring that it is progressed
through the RPF life cycle.
Obtain assistance from other department as required to prepare the proposal plan that meets the
objectives of the proposal budget and timeline.
Clearly define the requirement and scope of work offered to the client and identifies any
clarifications or exceptions to the client’s request.
4. Page | 4
Ensure utilization of approved company’s vendors and OEMs(original equipment manufacturer)
requesting cost if necessary to complete the request for proposal(RPF).
Obtain feedback from projects for “lesson learned” to incorporate in future proposals.
Prepare initial assessment of the technical, financial, schedule or any other unusual risk
associated within a proposal.
Prepare and review purpose orders in order to verify accuracy ,terminology, specifications and
send copies to OEMs.
Placing order with the company’s OEMs, tracking and following-up on progress through to
delivery, respond to queries about order status, changes or cancellation.
Determine if inventory quantities are sufficient for the RFP, liaise with logistics to order required
materials when necessary.
Assist in project planning, budgeting of all project assigned by the project manager.
Monitor and track project milestone and deliverables and make revisions as and when the need
arises.
Develop or update project plans for project including information such as project objectives,
technologies, system information specifications, schedules,funding and analyzing information
from all lead engineers ensuring that the weekly report is sent out to the client in a timely
manner.
Communicate with engineers on project progress as well as effective lead discussion.
Ensure project documentations such as high level project plans.
Identify the element of project risk that are likely to give rise to dispute and claims.
PROJECT ENGINEER
Job Description
Auto-Cad Drafting and Design of installation layout for IP Surveillance cameras.
Auto-Cad Drafting and Design of installation layout for Access Control Systems.
Installation and configuration of IP Surveillance systems.
Preparation of Bill of Quantities for Access control and Surveillance systems.
Preparation of Bill of Quantities for Addressable Fire Alarm and Smoke Detection Systems.
Supervision of installers on Addressable Fire Alarm and Smoke Detection Systems.
Design & Preparation of Bill of Quantities for Fire Hydrant Systems.
Supervision of installers on Fire Hydrant Systems (for the installation of diesel pump, electrical
pump, jockey pump, pressure vessel, sprinkler systems etc.)
Plan and co-ordinate the activities to be done on projects with Head of Operations, site
supervisor technicians and contractors to enable a timely completion.
Using MS-Project to develop the work breakdown schedule (WBS) for projects.
Monitor the progress on projects against their timelines and prepare progress reports to be sent
to clients and other stake holders on the project.
Carry out inspections and maintenance services with staff and contractors and prepare
inspection reports for clients.
Carry out execution audit on installations with respect to NFPA standards.
Ensure proper installation procedures and execution while supervising contractors.
Raise procurement list of materials for projects.
Design fire safety systems (gas/water/foam based fire suppression and/or fire detection and
alarm) for projects/clients using computer aided design software
5. Page | 5
Respond to request for quote from clients on fire safety systems and/or equipment.
Carryout gas cylinder inspection for FM 200 Cylinder in Fire suppression System
Carry out testing, commissioning and training of fire safety systems on projects and to clients
NENDA-MARK SERVICES LTD,
Elelewon, Port Harcourt.
Position:-Architect - Engineer/Liaison officer (May 2013-May 2014)
LIAISON /SUPPORT OFFICER,
Job Description
Maintain a viable information loop by liaising with the supervising engineer on all operational
matters.
Report progress and status of job being executed by providing written status project report at the
end of every week to management.
Liaise with operations manager or supervising engineer on materials and equipment required for
contract execution,and place order or carryout purchase of same by liaising with account.
Complete the needed paper work for the purchase of materials and equipment required for the
execution of a project as advice by the operations manager or supervising Engineer.
Developing and maintaining relationships with vendors, negotiating pricing, collaborating on
approved vendor list, keeping vendor list updated and publishing the list for the company.
Achieve a timely implementation of all audits recommendations by providing written status of all
project site reports at the end of the week.
Participate in Preparation of pre-qualification and commercial bids for opportunities published in
the national dailies, internet and other notifications.
Follow-up on business and contractopportunities.
Prepare documents for designs at various project stages - Pre-Sales, Sales and Post-Sales
(Implementation).
Working with the on-site maintenance staff in managing all maintenance-related and capital
improvement activities within an assigned property/office.
Advises the management when specialist intervention is required
Trains personnel on equipments safety regulations and procedures.
Develop scopes of work for small improvements/services and seek out qualified contractors to
bid the work.
Work closely with Sales Team to help support client requirement.
Working with the on-site maintenance staff in managing all maintenance-related and capital
improvement activities within an assigned property/office.
Initiating, performing & overseeing maintenance projects.
Turnovers, general maintenance, repairs, grounds upkeep, and overall upkeep of company’s
customers’ outlets, offices and properties.
Assisting team leaders in carrying out the implementation of various policies, standards,
procedures and programs relating to the overall maintenance and upkeep of the projects.
Handling a variety of facility maintenance requirements.
Works with on-site Manager to meet and exceed the needs of the project.
Manage existing contractors to ensure turnaround time on the maintenance is reduced.
6. Page | 6
Developing and maintaining relationships with vendors, negotiating pricing, collaborating on
approved vendor list, keeping vendor list updated and publishing the list for the company.
General Supervision and support for the service maintenance teams at assigned Projects.
Runs regular checks on technical equipment to prevent any problem.
Implements corrective action plans.
ARCHITECT-ENGINEER,
Job Description
Auto-Cad Drafting and Design of installation layout for IP Surveillance cameras.
Installation and configuration of Offshore Explosive Proved indoor and Outdoor Surveillance
systems.
Carryout Conceptual Design and produce as built or required SLD of major or minor Electrical,
Civil, and Mechanical project as assigned by the supervising Engineer.
Installation of Fiber Optic Based, Long Distance IP Surveillance System.
Installation of Electronic Access Control System ranging from Pedestrian Turning
Configuration and Programming of GSM Advance Security Control Panel.
Conduit and Trunking installation of external and internal CAT5 & CAT6 (LAN) cables.
Installation and monitoring of Speed Dome Camera System, Infra-Red Day/Night Outdoor
Cameras System.
Installation of IP cameras ranging from Vandal dome,Speed dome,Bullet cameras, Fish eye etc.
Installation and Configuration of Digital Video Reorder with Remote Watch.
Access Control, Vehicle Barrier Gate Access Control, Biometric Door Control.
Installation of Swing and Sliding Gate Control.
Installation of Voice Alert Monitoring Systems.
E-TOP NIGERIA LIMITED,
Dulphin Estate, Lagos.
Position:- Support Engineer (March 2013- May 2013)
Job Description
Configuration of POS terminals
Deployment of POS terminals
Maintenance support of POS terminals
HOLY FINGER & GLOBAL CONCERNS LTD,
Shogunle-Oshodi ,Lagos.
Position:-Trainee Engineer ( March 2011 – March 2013.)
Job Description
Installation of contactors, circuit breakers, over current protective device, etc in change over
switches , control panels(Synchronizing panels and inter-locking panel, AMF panels etc.).
Power Factor Correction.
Installation of motor starters.
Installation of conduit and trunking fittings for both residence and industries.
Auto-Cad Drafting and Designs of Electrical and Architectural works.
7. Page | 7
SAMTRACK ENGINEERING COMPANY LTD,
Abule-Egba, Lagos.
Position:-Trainee Engineer (November. 2006-October 2007)
Job Description
Assembling and soldering of components on Vero boards.
Trouble shooting and repair of sound device (such as slave amplifier,mixer amplifier etc)
Other Skills
Excellent communication skills
High Level of creativity
Keen observation skill
High Level of innovation
Proficient human interpersonal relations
Ability to work with little or no supervision
Ability to work under pressure
Ability to build and work in a team
Ability to multi-task
Physical and mental alertness
Good team player
Self-motivated and target oriented.
Good knowledge of safety procedure.
High level of integrity and reliability
Computer literate:Good knowledge of MS- Word, MS Excel, MS Power Point,MS Project,
Auto-Cad ,Revit,C++ Programming,MatLab Programming, Proteaus Simulator et c.
Personal Data
Date of Birth: 5th December, 1982 Gender: Male
Nationality: Nigerian Marital Status: Single
State of Origin: Ondo State. Hobbies: Travelling and Reading
L.G.A : Akoko- East Language spoken: English & Yoruba
REFEREES:
Engr. Adaramola Michael Folorunso,
Senior Lecturer,
Electrical & Electronics Engineering Department,
Lagos State Polytechnic,Ikorodu,
Lagos State.
Email: mfadaramola@yahoo.com,michaelfolorunso2014@yahoo.com
Tel: 08068403602.
8. Page | 8
Mr. Orimoloye Imole Michael,
Technologist at NNPC, Warri Delta State.
Maintenance Department NNPC/WRPC.
Email: orimoloye.imole@gmail.com
Tel: 08038656698.
Mr. Oluga Abiodun A .
Technologist at Bolatinubu Diagnostic Center ,
LASUTH,Ikeja Lagos State.
Email: ababioten63@yahoo.com
Tel: 08057355939.