Draeger cataloger for fire & gas detection solution in region Australia, New Zealand, PNG & Pacific Islands. Please contact us for any further information.
3. D-9213-2016
FLAMMABLE GAS DETECTORS
ST-11659-2007
Dräger PIR 7000
The Dräger PIR 7000 is an explosion proof infrared gas detector for continuous monitoring of
combustible gases and vapours. With its stainless steel body and drift free optics and large gas
library this transmitter is built for the harshest offshore environments. Non Intrusive calibration.
Range: PPM/LEL/Vol. Built in HART with SIL2 capability. IECEx and other world wide approvals
including IP 67/68.
D-7358-2016
Dräger Pulsar 7000
The Dräger Pulsar 7000 Series are stationary open path gas detectors. They detect flammable
hydrocarbons in gases and vapours. The robust design and the extremely rapid response of the
sensor make the Dräger Pulsar 7000 Series a dependable solution for your requirements in the oil
and gas industry, as well as the chemical industry. Large status LED (amber/green) provides clear
indication of the instrument status.
D-14991-2010
Dräger Polyton 8700
The Dräger Polytron 8700 is an explosion proof infrared gas detector for continuous monitoring
of combustible gases and vapours. With its stainless steel/Alimunium body and drift free optics
and large Gas library this transmitter is built for the harshest offshore environments. Non Intrusive
calibration and display with option of Relays. Range: PPM/LEL/Vol Built in HART with SIL2
capability. IECEx and other world wide approvals including IP 67. Also available with modbus and
fieldbus communications.
D-15018-2010
Dräger Polytron 8310
The Dräger Polytron 8310 is an explosion proof infrared gas detector for continuous monitoring
of combustible gases and vapours. With its stainless steel/Alimunium body and drift free optics
and large Gas library this transmitter is built for the harshest offshore environments. Non Intrusive
calibration and display with option of Relays. Range: 0-100% LEL, PPM (Refrigerants) Built in HART.
IECEx and other world wide approvals including IP 67.
14 | PRODUCT & SERVICE CATALOGUE AUSTRALIA AND NEW ZEALAND
4. D-9213-2016XXXX
FLAMMABLE GAS DETECTORS
D-15045-2010
Dräger Polytron 8200 DD
The Dräger Polytron 8200 is a catalytic-based gas detector for continuous monitoring of
combustible gases and vapours in ambient air. Non intrusive calibration using magnetic wand.
Display with option of built in relays. Range: 0-100% LEL/Vol Built in HART with SIL2 capability.
IECEx and other world wide approvals including IP 67.
D-32407-2011
Dräger Polytron 5200 DD
The Dräger Polytron 5200 DD is a catalytic-based gas detector for continuous monitoring of
combustible gases and vapours in ambient air. Non intrusive calibration using magnetic wand.
Option of built in relays. Range: 0-100% LEL/Vol IECEx and other world wide approvals including
IP 67. Commonly used for detection of hydrogen and also ammonia in refrigeration plant rooms.
D-42775-2015
Dräger Gassecure GS01
The GS01 is a wireless infrared gas transmitter for continuous monitoring of flammable
hydrocarbon gases and vapours in the oil and gas industry. The intrinsically safe and SIL-rated
transmitter features completely wireless signal transmission and power supply. This makes the GS01
a flexible and cost efficient solution for plant expansions, upgrades, and new greenfield projects.
Operates on two D-size batteries for approximately 2 years and is calibration free for life.
D-13699-2010
Dräger Polytron SE Ex HT
The Dräger Polytron SE Ex HT M (HT: High Temperature) is intended to be used at ambient
temperatures up to 150 °C. This sensing head is preferably used at conditions, where extremely high
temperatures exist, especially for leak detection in the direct vicinity of gas turbines. The temperature
resistant terminals are housed in a robust galvanised cast
iron enclosure. Range: 0-100% LELIEC, ATEX approved.
PRODUCT & SERVICE CATALOGUE AUSTRALIA AND NEW ZEALAND | 15
5. ST-11660-2007
Dräger PIR 7200 (CO2
Detector)
The Dräger PIR 7200 is an explosion proof infrared gas detector for continuous monitoring
of Carbon Dioxide. With its stainless steel body and drift free optics this transmitter is built for
the harshest of environments. Non Intrusive calibration. Range: 0-2,000 PPM / 0-10% / 30% Vol
Built in HART with SIL2 capability. IECEx and other world wide approvals including IP 67/68.
D-2945-2018
Dräger Polytron 8720 (CO2
Detector)
The Dräger Polytron 8720 is an explosion proof infrared gas detector for continuous monitoring
of carbon dioxide. With its stainless steel/Alimunium body and drift free optics, this transmitter is
built for the harshest offshore environments. Non Intrusive calibration and display with option of
Relays. Range: 0-10,000PPM / 0-10%/ 30% Vol Built in HART with SIL2 capability.IECEx and other
world wide approvals including IP 67.
D-7351-2016
Dräger PointGard 2100
The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area
monitoring of oxygen & toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing
comes complete with a horn and strobes, a built-in power supply, and reliable Dräger Sensor.
D-15058-2010
Dräger Polytron 8100 EC
The Polytron® 8100 EC is Dräger’s top of the line explosion proof transmitter for the detection of
toxic gases or oxygen. It uses a high performance plug and play electrochemical DrägerSensor®
to detect a specific gas. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers
Modbus and Fieldbus protocol making it compatible with most control systems.
DETECTION OF TOXIC GASES AND OXYGEN
ST-3875-2003
PRODUCT & SERVICE CATALOGUE AUSTRALIA AND NEW ZEALAND | 16
6. DETECTION OF TOXIC GASES AND OXYGEN
ST-11434-2007
D-156-2016
Dräger Polytron 5100
The Dräger Polytron 5100 is an explosion proof (Flame Proof) detector that can satisfy all toxic
and oxygen gas measurement applications on a single platform. Options include relay module,
remote sensor and duct mount kit. IECEx and other world wide approvals including IP 67.
D-3811-2003
Dräger Polytron 3000
The Dräger Polytron 3000 is an intrinsically safe gas detector for the monitoring of toxic gases and
oxygen in ambient air. Using the same Polytron Docking Stations the Dräger Polytron 7000, it is able
to take advantage of the two part mounting concept. The digital temperature compensation of the
sensor signal and unsurpassed RFI resistance make the Dräger Polytron 3000 ideal for standard
gas detection requirements. IECEx approved.
ST-3812-2003
Dräger Polytron 7000
The Dräger Polytron 7000 is an intrinsically safe detector that can satisfy all toxic and oxygen gas
measurement applications on a single platform. Options available include plug-in accessories such
as relay or pump module, remote sensor, duct mount kit, test and data logging funcions. A unique
mounting concept enables the pre-mounting and wiring of the Polytron Docking Station. Option of
HART with SIL2 capability. IECEx and other worldwide approvals including IP 67.
ST-5621-2006
Dräger Remote Sensor Polytron 7000/8000
The remote sensor allows the sensors to be mounted in remote or hard to access locations with
the transmitter mounted in an accessible location. Remote sensors can be used with all
electrochemical sensors, along with Polytron 7000/8000. Available lengths are 5, 15 & 30m.
17 | PRODUCT & SERVICE CATALOGUE AUSTRALIA AND NEW ZEALAND
7. FLAME DETECTORS
ST-11434-2007
D-49077-2012
Dräger Flame 5000
The Dräger Flame 5000 is an explosion proof near infrared (NIR) based visual flame detector.
Each detector operates stand alone and incorporates, within a single unit, an integrated CCTV
system; digital signal processing and software algorithms to process live video image and interpret
the characteristics of a flame. Ensure reliability in the detection of fires whilst at the same time
providing excellent immunity to potential false alarm sources by providing a live video. Built in
HART with SIL2 capability. IECEx and other world wide approvals including IP 67. Outputs:
4-20mA or Relays & Video.
D-49076-2012
Dräger Flame 3000
The Dräger Flame 3000 is an explosion proof near infrared (NIR) based visual flame detector. Each
detector operates stand alone and incorporates, within a single unit, an integrated flame detection
system; digital signal processing and software algorithms to process live video image and interpret
the characteristics of a flame. Ensure reliability in the detection of fires whilst at the same time
providing excellent immunity to potential false alarm. IECEx and other world wide approvals.
Outputs: 4-20mA and Relays.
D-5900-2016
Dräger Flame 2500
With its triple IR sensor The Dräger Flame 2500 detects hydrocarbonbased fires even over greater
distances. Moreover, it offers a high reliability against false alarms. Built in HART with SIL2 IECEx
approvals. Output: 4-20mA and Relays.
D-5901-2016
Dräger Fame 2700
With its multichannel IR sensor the Dräger Flame 2700 detects hydrocarbon- and hydrogen-based
fires. Thereby it offers a high reliability against false alarms. Built in HART with SIL2 IECEx
approvals. Output: 4-20mA and Relays.
PRODUCT & SERVICE CATALOGUE AUSTRALIA AND NEW ZEALAND | 18
8. CONTROL SYSTEMS
D-6507-2016
ST-335-2004
Dräger REGARD 1
The Dräger REGARD 1 is a standalone, self contained single channel control system for the
detection of Toxic, Oxygen and Explosive hazards. The control system is fully configurable for a
single input from either a 4-20mA transmitter or a Dräger Polytron SE Ex measuring head. Built in
relays, buzzer and LED’s for Alarms. Performace approved.
D-1130-2010
Dräger REGARD 3920
The Dräger Regard 3920 is a flexible multi-channel universal control system for 4-20 mA transmitters.
The system is freely configurable for up to 16 channels and includes flexible gas and fault alarm
evaluation. Optional relay boards are available to allow single or voting alarm structures. The Dräger
Regard 3900 has a robust IP65 design and can be installed outdoors. Performace approved, SIL2
capability.
D-6806-2016
Dräger REGARD® 7000
When you need to monitor and analyze a number of various gases and vapors, the Dräger
REGARD® 7000 is a modular and highly expandable analysis tool. Suitable for gas warning systems
with various levels of complexity and numbers of transmitters, the Dräger REGARD® 7000 is
exceptionally reliable and efficient. An additional benefit is the system’s backward compatibility with
legacy REGARD® controllers.
D-256127-2012
Dräger Sampling Systems
The Dräger sampling units are designed to measure the concentrations of toxic and potentially
explosive substances in locations where access is difficult. All required components are already
fitted to a mounting plate/enclosure. To achieve maximum flexibility for a variety of applications, all
Dräger transmitters with process adapter can be used.
19 | PRODUCT & SERVICE CATALOGUE AUSTRALIA AND NEW ZEALAND