3. Introduction
• Generating electrical power as non-
conventional method by simply
walking or running on the
foot step. Non-conventional energy
system is very
essential at this time to our nati
on.
• Nonconventional energy using foot
step is converting mechanical
energy into the electrical energy.
8. ADVANTAGES
• Reliable, Economical, Eco-Friendly.
• Less consumption of Non- renewable energies.
• Extremely wide dynamic range, almost free of noise - suitable for shock
measurement as well as for almost
• imperceptible vibration
• Excellent linearity over their dynamic range
• Compact yet highly sensitive
• No moving parts - long service life
• Self-generating - no external power required
• Great variety of models available for nearly any purpose
9. • Foot step generated power can be used for
agricultural, home applications, streeght-
lightining.
• Foot step power generation can be used in
emergency power failure situations.
• Metros, Rural Applications etc.,
Applications
11. CONCLUSION
• The project “FOOT STEP POWER GENERATION
FOR RURAL ENERGY APPLICATION TO RUN A.C.
AND D.C. LOADS” is successfully tested and
implemented which is the best economical,
affordable energy solution to common people.
This can be used for many applications in rural
areas where power availability is less or totally
absence. As India is a developing country where
energy management is a big challenge for huge
population. By using this project we can drive
both a.c. as well as D.C loads according to the
force we applied on the piezo electric sensor.
12. • A piezoelectric sensor is a device that uses
the piezoelectric effect to
measure pressure, acceleration, strain or force
by converting them to an electricalsignal
13. piezoelectric sensor
A piezoelectric sensor is a device that uses
the piezoelectric effect to
measure pressure, acceleration, strain or force
by converting them to an electricalsignal.
14. Inverter
An inverter is an electrical
device that converts direct
current (DC) to alternating
current (AC); the converted
AC can be at any required
voltage and frequency with
the use of appropriate
transformers, switching, and
control circuits.
15. Working
• When ever force is applied on piezo electric
crystals that force is converted to Electrical
energy is used to drive DC loads. And that minute
voltage Which is stored in the Lead Acid
battery.The battery is connected to the inverter.
This inverter is used to convert the 12 Volt D.C to
the 230 Volt A.C. This 230 Volt A.C voltage is used
to activate the loads. We are using conventional
battery charging unit also for giving supply to the
circuitry.
•
16. Applications
• Foot step generated power can be used for
agricultural, home applications, streeght-
lightining.
• Foot step power generation can be used in
emergency power failure situations.
• Metros, Rural Applications etc.,