More than Just Lines on a Map: Best Practices for U.S Bike Routes
SCiO: Differentiate your product with unique and innovative material sensing technology
1. THAT YOU CAN ANALYZE
QUALITY & CONTENTS OF
MATERIALS AND FOOD,
IN REAL TIME?
Collect
samples
& send
Wait an hour
from previous
test
Infrequent
testing
Long time
for results
Need to get
to the lab
Bad process
continues until
results are back
WASTED
MATERIALS
WASTED
PRODUCTION
TIME
Only
1 in 10 are
tested
Get
results
Wait for
lab
15 min work Even 1 in 100
MEETJOE
CHALLENGES
PLANTMANAGERAT
FEED/FOOD
MANUFACTURER
by Consumer Physics
by Consumer Physics
WHAT IF WE TOLD YOU
by Consumer Physics
To learn more about SCiO, contact a member of our customer solutions
team at sales@ConsumerPhysics.com.
www.consumerphysics.com
MEETSCiO
TAKE SCiO
out of your
pocket
SCAN
2 seconds
GET
RESULTS
3 seconds
TAKE
ACTION
+
+
-
SCiO is theWorld’s First and OnlyPocket
Sized Spectrometer: Ultra-Compact,
Affordable, and Easy to Use. SCiO
Brings Lab-Grade Material Analysis
to a Wide Spectrum of Businesses
and Industries.
5SEC
His KPI’s:
Increase productivity
Profitability
Reduce costs
Can only test a few of the materials
due to capacity limitations at the
lab (he uses lab sampling to verify
incoming materials, finished goods,
and in-process materials).
JOE'S MAIN BOTTLENECK:
LAB CAPACITY
NEEDS TO PRODUCE
AT LOW COST WHILE
MEETING STRICT
QUALITY STANDARDS
VALIDATE INCOMING RAW MATERIALS
PRODUCTION LINE QUALITY CONTROL
Get
results
Wait
1-5 hours
Materials
wait in the
receiving
dock
1
2
Take samples
from production
line, either interim
materials or final
goods, and send
to lab.
RESULT
UNSATISFACTORY RAW MATERIALS
ARE NOT DETECTED IN TIME
MANUFACTURING ISSUES
IDENTIFIED TOO LATE
JOE USES SCIO IN THE PLANT
OVER THE PAST 6 MONTHS
Using SCIO to:
• Validate and accept raw materials
• Quality control on the production line
Joe's team now tests ALL incoming
raw materials.
Joe’s team tests materials on the
production line every 15 minutes, both
in process and finished goods.
When a problem is detected, Joe’s shift
managers are automatically alerted
through SCiO’s connectivity capabilities.
many hours
up to 1 day
OF LOW FREQUENCY QUALITY CONTROL
2 badly labeled containers
were detected at the
receiving dock, preventing
manufacturing errors that
would have cost a fortune
to remedy
4 production issues that
resulted in sub-standard
products were detected
on the production line and
resolved quickly. The amount
of throw-away materials
has dropped significantly
Production line staff
spend less time taking
samples from the
production line to the lab