1. Knowledge of Door Lock
Methods of purchasing the door lock
Feel: the feel of the door lock is determined by the spring, and the quality of spring
determines the feel and life. For example, the feel of Glass door lock is good. Some lock with
poor quality spring and therefore is likely to cause the handle to sag, thus ending the life of
the door lock. Therefore we have to try their toughness of the hand locks spring in the
process of purchase, and the feel brought by the high quality of spring is very soft, which will
be not too soft or too hard.
Coating: we have also to consider the coating of the lock, and have to consider whether the
locks or the handle will fade. Generally, the protective layer of the good locks, that is, plating
will not be easily oxidized and worn. Bedroom overall appearance of coating is related to the
door lock handle, and thus it cannot be ignored.
Abrasion resistance: the material of the locks is associated with the degree of wear-resistant.
We have to ask the dealer what kind of material the lock is in the time of purchase, such as
cast iron and steel.
Steps and methods for maintain the lock
Select brand-name lock with quality assurance and produced by the manufacturers.
Pay attention to select the lock with the same direction of your doors open.
Pay attention to the door of your home border width, ball-type lock and handle lock door
cannot be less than 90cm.
Note: only remove the end of the line of insurance can install the lock, and do not remove the
key end installation, it is best to read the instructions carefully. Such as Sliding glass door
locks
Do not drop oil in the heart of lock, if the key is inflexible, and we can put pencil lead
shavings to key eye.
Do not wipe the lock and handle with a damp cloth to prevent rust.
Tips for the use of door lock
You'd better hold the handle when close the door, screw the bolt into the lock, shut the door
and then let go, do not force the door, otherwise it will reduce the life of lock.
The structure on the internal is not the more complex the better, because now lock security
has no significant with the operability. For indoor door locks, the simpler the better! If it is split
lock in the appearance, we should mainly consider doorknob form factor, for example, some
carved or some animal shape, the more complex and more expensive.
Generally, I recommend you to select stainless steel. But not stainless steel will certainly be
the best, for example, the bathroom door should be copper. Because the related agencies
confirmed copper lock can destroy bacteria and reduce the spread of disease.

2. www.gate-locks.net
ANOYA hardware Co., LTD is a professional hardware manufacturer, which established in
1995 and specialized in producing door locks, panel handle, cylinder, padlocks, hinges (co-
leaf), ball rail and other hardware. In terms of material, stainless steel 304 and 316, brass,
aluminum and zinc alloy are available.
This article come from:http://www.soundspeakers.cn/index.php/knowledge-of-door-lock.htm