CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdf
Cranes and Heavy Equipments - Adgeco Group
1. Cranes and Heavy Equipment
GIANT CRANES
Known as the only true heavy lift ‘crane’ in the world and the only Third
Generation with 120,000 Tm (3200 metric ton lifting capacity), constructed.
Designed to accommodate the heavy lifting requirements for refinery, oil
and gas, mining, offshore platform and third generation components for
SELF
PROPELLED
MODULAR
TRAILERS
Hydraulic Cranes
Marine JettyGiant Cranes
cranes & heavy
Equipments
2. nuclear power plants, this heavy lift crane meets all US and European Lift
Crane Standards and is CE certified.
Strong heavy lifting apparatus with high load moment
Limited footprint
Low ground bearing pressures
On-site flexibility
Flexible worldwide transportation
Versatile lifting machine
Modern machinery mounted with hydraulic telescopic cranes, fixed and whirling
telescopic handlers, forklift trucks with the construction areas vehicles of different
capacities and tonnages
Rigging Equipment
Shackles (standard, heavy duty, wide body or sling)
Slings & Grommets (4-point lifting tackle, doubled sling, snatch
block/sheave, equalizer beam, spreader beam)
Azobe Mats (Azobe wedges and reinforced azobe wedges)
Hydraulic Cranes
30 ton
30 < 40 ton
40 < 50 ton
40 < 50 ton
50 < 70 ton
70 < 90 ton
90 < 120 ton
120 < 200 ton
200 < 250 ton
250 <500 ton
< 500 ton
Lattice Boom Cranes
100 ton
100 < 150 ton
150 < 200 ton
200 < 300 ton
3. 300 < 600 ton
> 600 ton
SELF PROPELLED MODULAR TRAILERS
Being used in a wide range of industries such as transport civil constructions and
petrochemical land peripherals. During load-outs, they are often used as vehicle to
drive heavy load components from the quay onto the barge. One trailer consists of
different modules from 4 or 6 axle lines with a capacity of 36 up to 48 tons per
axle line each. The lifting height of heavy load components is 500 mm estimation.
GANTRIES
Tower systems combined with strand jacks or gantries can be equipped with its
own jacking or climbing systems. Towers in pairs (vessel lifts) or in multi-coupled
lifting units (module lifts) to obtain the required lifting set-up. Available
equipment can carry a top side of an oil rig of 12.000 tons and the installation of a
6.000 tons shipyard gantry on a height of 140m.
JACKING
An alternative for lifting objects and is often used for the jacking of bridges and
modules from construction height to its final position.
Climbing Jack
maximum height: 9 m
bracing possible
semi-automatic
in-house designed
Perpetuum Jack
low minimal jacking height: 450 mm
capacity: 250 t per jacking position
easy assembly thanks to light jacking elements
in-house designed
SKIDDING
4. Used for moving and positioning heavy structures on a built up skid track.
Available skidding system can operate up to 18.000 tons.
PONTOONS
The ‘Twin barge’ concept is a custom-built fleet consisting of 3 different sized
pairs of barges according to the restrictions of the vast European network of rivers
and canals. Provided with own barges, it supports project work such as mounting
activities from the water and/or transport activities over inland waterways and seas
and bridges positioning. It has anchors and auxiliaries, fleet of station winches,
numerous ballast structures, and links pan bridges with variety of lengths and
diverse accounts of other equipment and systems
TOWER CRANES
Latest design of balance crane having the same basic parts with height and lifting
capacities that are being used in the construction of skyscrapers or tall buildings.
A hook height of over 200m, maximum of 900m, freestanding and can carry
up to 64 tons
Operating speed up to 200m/min
Rail-going portal up to 90m tower height with freestanding hook height
Operation system to maximum 17m/sec wind speed
Setting of out of operation position within minutes, do not require to put
down the jib
Possible without required foundation anchors radius
Additional space not needed
Installation can be done indoor or even at the construction site
Cooling of the blanch at counterweight benefits stable operation in the inner
operation range
Assembly weights of only maximum 28tons
LATTICE BOOM CRANES
A pedestal mounted crane with sectioned boom constructed from lattice steel
members. Lightweight boom design allows for higher lifting capacity and longer
boom lengths. Applications include FPSO’s, fixed and floating platforms.
Types
5. Truck mounted till 1.000T
Crawler cranes till 1.650T
Pedestal cranes till 2000T
Available fleet
15 cranes with capacity of > 1.000T
SGC-120(3.200T): lattice boom crane on double ring
1.500 cranes of all kinds in worldwide fleet
Average fleet age: 5 to 6 years
STRAND JACKS
These are used to lift civil constructions or power plant components through
hydraulic cylinders and steel wires (strands), the heavy load component is lifted to
the required height or pulled (skidded) to a certain position. Capacities starting
from 15 tons up to 1130 tons.
HANDLING FACILITY AND CAPABILITIES
25 M Ton
10 M Ton
5 Ton
Under hook height of 7.0 meters, Span 22.0 meters
Maximum Capacity inside workshop is 50 M Ton
Gantry Crane
Or called as bridge cranes and overhead cranes which lift objects by a heave fitted
in a hoist trolley and can be moved horizontally on a rail or pair of rails fitted
under a beam.
2x10T – 20T cap with 10 meters height under hook
Span 18.0 meters
Maximum travel is 110 meters
Dredge 50’length
Dredge is powerful machine, a barge for dredging up or removing earth, dragnet or
other contrivance for gathering material or objects from the bottom of a body of
water, by means of a scoop, a series of buckets, a suction pipe, or the like.
6. 1x90T cranes
1x70T cranes
Mobile Cranes
These are the powerful, a compact and maneuverable machines that are best for
combined road and off-road operating requirements on construction sites of all
kinds. Mobile cranes are hydraulic – powered crane with a telescoping boom
mounted on truck – type carriers or called as self – propelled models. Mostly used
in different types of load and cargo with almost no setup or assembly needed.
From 18 M Ton- 600 M Ton
Fork lifts
Forklifts are usually called as fork truck or lift truck as it is a powered industrial
truck to lift and move materials in short distances. Its pronged device in front is the
responsible for lifting and carrying loads.
4.0 M Ton-10.0 M Ton
Yard Tower Crane
Used to lift steel, concrete and the other variety of building materials for
loading/unloading tower crane equipment on and off semi – trucks moving in/out
of the yard
8 M Ton capacity
50.0 meters boom
125.0 meters travel
MARINE JETTY
Engineering structures connected with harbor and coastal works designed to
control the current or tide or to protect a harbor or beach from waves (breakwater).
May be built out a intervals from the banks of rivers where a wide channel is
narrowed to concentrate the current.
Landing Craft berthed with 86m craft length (jetty 104 meters)
104 meter with 6 meter deep
7. TERRAIN CRANES
A kind of mobile crane with the necessary equipment to travel at speed on roads
and rough terrain at the job site using all – wheel and crab steering. Used for both
on and off-road construction and industrial projects.
From 30 tons to 300 tons
Crawlers and truck cranes
All terrain and rough
Kobelco, Liebherr, XCMG, Terex Demag, Tadano
TURNKEY SERVICE SOLUTIONS
2 LTMs Tandem lift of M6 Structure
Liebherr LR 1300 lifting of generators
CC 6800
LTM Crane
Liebherr LR-1200
Nicolas Trailer Transporting Vessel of 300 Tons
Liebherr 1300, Lifting Gantry Crane columns
Liebherr LTM-1250
Demag CC 2400
LR 1160, Lifting of Ventilation Concrete Pipe
Liebherr LR 1200
LTM 1500
Liebherr LTM 1200 & LTM 1160
OTHER CRANES
Multi-handler/Multi-loader
Cranes with a combination of the capabilities of a modern telescopic handler with
special safety features. The elevating cab provides the driver with an optimal
overview of the goods to be lifted enabling them to carry out the goods handling
process safety and optimally. Skid Steering, High Maneuverability & Short tuning
radius.
305 (5t, 7.3m, 91 kW, 11.5 t)
305 XL (5t, 9.0m, 91kW, 11.8t)
8. 310 Multiloader (10t, 9.3m, 144 kW, 21t)
Timber Handling
Machines for pick and carry, a very strong drive and transportation machine with
extraordinary high lifting capacity. It can load and can be transported and stacked
at very narrow space, through all wheel steering.
718 M – Multi – functional machine for efficient harvesting of fuel wood,
landscape conservation, round timber manipulation, equipped with a variety
of attachments
723 M-HD – Pick and carry: very strong drive – and transportation machine
with extraordinary high lifting capacity. Loads and goods can be transported
and stacked at very narrow space, through all wheel steering
730 M-HD – perform pick – and – carry operations and to cater for the
requirements of the woodworking industry. A powerful and robust transport
machine is very easy to maneuver.
830 M-T – specifically for logging work, engineered for both fast loading
cycles and heavy trailer pulling.
Material Handling Machines
818 M
818 R
821 M
821 R
825 M
825 R
830 M
830 MHD
830 R
830 R Special
830 R-HDD
830 Vario Tool
835 M
835 R
835 M special
835 R special
840 M
840 R
9. 850 M
850 R
850 M special
850 R special
860 M
860 R special
860 M special
860 R special
870 M
870 R
870 M special
870 R special
870 M Gantry
880 M
880 R
880 EQ
HD Crawler Cranes
620 HD
630 HD
630 M
655 HD
680 HD
690 HD
6100 HD ADGECO GROUP
Three Sails Tower Corniche Road 1204 Suite
Building No. 27w10
P.O.Box 549, Abu Dhabi, UAE
(+971) 2-681-3111
www.adgeco.com