Modeling and Control Robot Arm using Gazebo, MoveIt!, ros_control

Gazebo, MoveIt!, ros_control을 활용한 로봇팔 모델링 및 제어
2nd Open Robotics Seminar

December 22, 2014

Byeong-Kyu Ahn (byeongkyu@gmail.com)

✓ Prerequisite
✓ Robot (Target)
✓ UDRF
✓ Gazebo
✓ Controller
✓ MoveIt
✓ Demo
✓ Real Robot
An Overview

Prerequisite
ROS Indigo Igloo 1)
Ubuntu 14.04 LTS (Trusty)
Gazebo 4.1.0 2) MoveIt 3)
1) ROS Installation: http://wiki.ros.org/indigo/Installation/Ubuntu
2) Gazebo Installation: http://gazebosim.org/tutorials?tut=install&ver=4.0&cat=get_started
3) MoveIt Installation: http://moveit.ros.org/install
4) ros_control: http://wiki.ros.org/ros_control
ROS control, an ove
ROSCon 2014
September 12, 2014
Adolfo Rodríguez Tsouroukdissian
ros_control 4)

$ sudo apt-get install ros-indigo-moveit-*
$ sudo apt-get install ros-indigo-ros-control
$ sudo apt-get install ros-indigo-ros-controller
$ sudo apt-get install ros-indigo-joint-state-controller
$ sudo apt-get install ros-indigo-effort-controllers
$ sudo apt-get install ros-indigo-position-controllers
$ sudo apt-get install ros-indigo-joint-trajectory-controller
Install packages for MoveIt, ros_control

Robot
고기능 작업용 팔
항목 설명
재원
길이: 670.73mm
무게: 7.63kg
자유도
8 DoF
(어깨 4, 팔꿈치 1, 손목 3)
가반하중 3.0kg
종단속도 0.6m/s
통신 CAN
전원 24V
제어방식 위치, 속도, 전류제어
- 어깨와 몸통 사이의 자유도 구현 (총 8자유도)

- 외력 반응성 (Backdrivablity) 향상을 위한 저기어비 설계 (100/1)

- 타이밍 벨트 및 풀리에서 생기는 마찰 및 손실 방지를 위해 모터/기어 직결모듈 방식

- 각 관절의 절대위치 인식 (엡솔루트 엔코더)

- 토크 제어 (전류제어)

- 외부와 접촉 시 접촉 힘 측정 및 대응 (F/T 센서 장착시)

- 중공형 기어, 모터, 엔코더 사용로봇산업원천기술개발사업 - 로봇 H/W플랫폼기술 개발 (2009. 06 ~ 2011.05)
Speciﬁcation
Characteristic

Part별
Mass(kg)
Inertia Tensor
Center of Mass
Separate
Parts
(Link)
Part별
COLLADA 파일
or STL
Joint 정보
회전축, 한계값
최대속도 등
알아내야 할 것들
COLLADA.org - https://collada.org
http://ko.wikipedia.org/wiki/관성_모멘트

Mass(kg)
Inertia Tensor
Center of Mass
설계한 사람한테 물어보기
어떻게 구하나?
직접 구하기(근사치)
MeshLab
- Find out inertial parameters: http://gazebosim.org/tutorials?tut=inertia&cat=
Menu > Filters > Quality Measure and Computations Compute > Geometric Measures
Mesh Bounding Box Size 115.100006 83.000015 85.500000
Mesh Bounding Box Diag 165.672150
Mesh Volume is 223733.125000
Mesh Surface is 126935.031250
Thin shell barycenter 14.123314 -0.036923 8.072087
Center of Mass is 8.950365 0.008595 7.867443
Inertia Tensor is :
| 252065328.000000 150681.546875 -32695376.000000 |
| 150681.546875 417160000.000000 -490.519348 |
| -32695376.000000 -490.519348 423229216.000000 |
Principal axes are :
| -0.983400 0.000865 -0.181451 |
| -0.000434 -0.999997 -0.002418 |
| -0.181453 -0.002299 0.983397 |
axis momenta are :
| 246032432.000000 417160032.000000 429262048.000000 |

shoulder_baseshoulder_yawshoulder_roll
shoulder_pitchunderarm
elbow_pitch
elbow_yawwrist_pitch
wrist_roll

Adolfo Rodríguez Tsouroukdissian, “ros_control: An overview”, ROSCon 2014

URDF : URDF Tutorial - http://wiki.ros.org/urdf/Tutorials
- Build up your own robot models, sensors, scenes, etc.
- XML format for representing a robot model

http://wiki.ros.org/urdf/XML/linkLink
<link name="my_link">
<inertial>
<origin xyz="0 0 0.5" rpy="0 0 0"/>
<mass value="1"/>
<inertia ixx="1.0" ixy="0" ixz="0" iyy="1.0" iyz="0" izz="1.0" />
</inertial>
<visual>
<origin xyz="0 0 0" rpy="0 0 0" />
<geometry>
<box size="1 1 1" />
</geometry>
<material name="Cyan">
<color rgba="0 1.0 1.0 1.0"/>
</material>
</visual>
<collision>
<origin xyz="0 0 0" rpy="0 0 0"/>
<geometry>
<cylinder radius="1" length="0.5"/>
</geometry>
</collision>
</link>

<inertial>
<origin xyz="0 0 0.5" rpy="0 0 0"/>
<mass value="1"/>
<inertia ixx=“1.0" ixy="0" ixz="0" iyy=“1.0" iyz="0" izz=“1.0" />
</inertial>
- Center of mass (meter)
- Mass (kg)
- Moments of inertia (kg * m2)
<visual>
<origin xyz="0 0 0" rpy="0 0 0" />
<geometry>
<box size="1 1 1" />
<mesh filename="package://safe_arm_meshes/meshes/link1.dae" scale="0.001 0.001 0.001" />
</geometry>
<material name="Cyan">
<color rgba="0 1.0 1.0 1.0"/>
</material>
</visual>
<collision>
<origin xyz="0 0 0" rpy="0 0 0"/>
<geometry>
<cylinder radius="1" length="0.5"/>
</geometry>
</collision>

<geometry> (required)

▪ The shape of the visual object. This can be one of the following:

▪ <box>

▪ size attribute contains the three side lengths of the box. The origin of the box is in its center.

▪ <cylinder>

▪ Specify the radius and length. The origin of the cylinder is in its center.

▪ <sphere>

▪ Specify the radius. The origin of the sphere is in its center.

▪ <mesh>

▪ A trimesh element specified by a filename, and an optional scale that scales the mesh's axis-
aligned-bounding-box. The recommended format for best texture and color support is
Collada .dae files, though .stl files are also supported. The mesh file is not transferred between
machines referencing the same model. It must be a local file.

http://wiki.ros.org/urdf/XML/jointJoint
<joint name="my_joint" type="floating">
<origin xyz="0 0 1" rpy="0 0 3.1416"/>
<calibration rising="0.0"/>
<dynamics damping="0.0" friction="0.0"/>
<limit effort="30" velocity="1.0" lower="-2.2" upper="0.7" />
<safety_controller k_velocity="10" k_position="15" soft_lower_limit="-2.0" soft_upper_limit="0.5" />
</joint>
▪ revolute - a hinge joint that rotates along the axis and has a limited range specified by the upper and
lower limits.

▪ continuous - a continuous hinge joint that rotates around the axis and has no upper and lower limits

▪ prismatic - a sliding joint that slides along the axis, and has a limited range specified by the upper and
lower limits.

▪ fixed - This is not really a joint because it cannot move. All degrees of freedom are locked. This type of
joint does not require the axis, calibration, dynamics, limits or safety_controller.

▪ floating - This joint allows motion for all 6 degrees of freedom.

▪ planar - This joint allows motion in a plane perpendicular to the axis.

<transmission name="${name}_tran">
<type>transmission_interface/SimpleTransmission</type>
<joint name="${name}">
<hardwareInterface>EffortJointInterface</hardwareInterface>
</joint>
<actuator name="${name}_motor">
<mechanicalReduction>1</mechanicalReduction>
</actuator>
</transmission>
http://wiki.ros.org/urdf/XML/TransmissionTransmission
actuator: actuator the transmission is connected to
joint: the joint the transmission is connected to
mechanicalReduction: a value for overall mechanical reduction at the joint/actuator transmission

http://wiki.ros.org/urdf/XML/GazeboGazebo
The gazebo element is an extension to the URDF robot description format, used for simulation purposes in the Gazebo simulator.
<gazebo>
<plugin name="gazebo_ros_control" filename="libgazebo_ros_control.so">
<robotNamespace>/safe_arm</robotNamespace>
<robotSimType>gazebo_ros_control/DefaultRobotHWSim</robotSimType>
</plugin>
</gazebo>
The default behavior provides the following ros_control interfaces:
▪ hardware_interface::JointStateInterface
▪ hardware_interface::EffortJointInterface

http://wiki.ros.org/urdf/Tutorials/Using%20Xacro%20to%20Clean%20Up%20a%20URD
http://wiki.ros.org/xacroXacro
URDF 등의 XML을 작성할때 유용하게 사용할수 있는 패키지. Macro, Property, Math, Conditional 등의 기능을 지원함
<?xml version="1.0"?>
<robot xmlns:xacro="http://ros.org/wiki/xacro" name="safe_arm">
<xacro:include filename="$(find safe_arm_description)/urdf/visuals.xacro" />
<xacro:include filename="$(find safe_arm_description)/urdf/safe_arm_v1_limits.xacro" />
<xacro:include filename="$(find safe_arm_description)/urdf/safe_arm_v1_structure.urdf.xacro" />
<xacro:include filename="$(find safe_arm_description)/urdf/safe_arm_v1.transmission.xacro" />
<xacro:include filename="$(find safe_arm_description)/urdf/safe_arm_v1.gazebo.xacro" />
<link name="world"/>
<joint name="fixed" type="fixed">
<parent link="world"/>
<child link="base_link"/>
</joint>
<link name="base_link" />
<link name="torso" />
<joint name="base_joint" type="fixed">
<origin xyz="0 0 1.0" rpy="0 0 0" />
<parent link="base_link" />
<child link="torso" />
</joint>

<xacro:safe_arm side="l" reflect="1" parent="torso" />
<xacro:safe_arm side="r" reflect="-1" parent="torso" />
</robot>

작성된 URDF에 대한 검증 작업 http://wiki.ros.org/urdf#Veriﬁcation
$ check_urdf my_robot.urdf
robot name is: safe_arm
---------- Successfully Parsed XML ---------------
root Link: world has 1 child(ren)
child(1): base_footprint
child(1): base_link
child(1): torso
child(1): l_shoulder_base_link
child(1): l_shoulder_yaw_link
child(1): l_shoulder_pitch_link
child(1): l_shoulder_roll_link
child(1): l_underarm_link
child(1): l_elbow_pitch_link
child(1): l_elbow_yaw_link
child(1): l_wrist_pitch_link
child(1): l_wrist_roll_link
child(1): l_end_effector_link
child(2): r_shoulder_base_link
child(1): r_shoulder_yaw_link
child(1): r_shoulder_pitch_link
child(1): r_shoulder_roll_link
child(1): r_underarm_link
child(1): r_elbow_pitch_link
child(1): r_elbow_yaw_link
child(1): r_wrist_pitch_link
child(1): r_wrist_roll_link
child(1): r_end_effector_link
$ urdf_to_graphiz my_robot.urdf
world
world_base_footprint_joint
xyz: 0 0 0
rpy: 0 -0 0
base_footprint
base_footprint_link_joint
xyz: 0 0 0
rpy: 0 -0 0
base_link
base_link_torso_joint
xyz: 0 0 1
rpy: 0 -0 0
torso
l_shoulder_base
xyz: 0 0 0
rpy: 0 -0 0
r_shoulder_base
xyz: 0 0 0
rpy: 0 -0 0
l_shoulder_base_link
l_shoulder_yaw_joint
xyz: 0 0.044 0.01
rpy: 0 -0 0
r_shoulder_base_link
r_shoulder_yaw_joint
xyz: 0 -0.044 0.01
rpy: 0 -0 0
base_link_torso_joint
xyz: 0 0 1
rpy: 0 -0 0
torso
l_shoulder_base
xyz: 0 0 0
rpy: 0 -0 0
r_shoulder_base
xyz: 0 0 0
rpy: 0 -0 0
l_shoulder_base_link
l_shoulder_yaw_joint
xyz: 0 0.044 0.01
rpy: 0 -0 0
l_shoulder_yaw_link
l_shoulder_pitch_joint
xyz: 0 0.0555 0
rpy: 0 -0 0
l_shoulder_pitch_link
l_shoulder_roll_joint
xyz: 0 0.119 0
rpy: 0 -0 0
l_shoulder_roll_link
l_underarm_joint
xyz: 0 0 -0.058
rpy: 0 -0 0
l_underarm_link
l_elbow_pitch_joint
xyz: 0.025 0 -0.24
rpy: 0 -0 0
l_elbow_pitch_link
l_elbow_yaw_joint
xyz: -0.025 0 -0.045
rpy: 0 -0 0
r_shoulder_base_link
r_shoulder_yaw_joint
xyz: 0 -0.044 0.01
rpy: 0 -0 0
r_shoulder_yaw_link
r_shoulder_pitch_joint
xyz: 0 -0.0555 0
rpy: 0 -0 0
r_shoulder_pitch_link
r_shoulder_roll_joint
xyz: 0 -0.119 0
rpy: 0 -0 0
r_shoulder_roll_link
r_underarm_joint
xyz: 0 0 -0.058
rpy: 0 -0 0
r_underarm_link
r_elbow_pitch_joint
xyz: 0.025 0 -0.24
rpy: 0 -0 0
r_elbow_pitch_link
r_elbow_yaw_joint
xyz: -0.025 0 -0.045
rpy: 0 -0 0

<launch>
<param name="robot_description" command="$(find xacro)/xacro.py $(find safe_arm_description)/urdf/
safe_arm_v1.urdf.xacro" />
<node pkg="robot_state_publisher" type="state_publisher" name="robot_state_publisher" />
<node pkg="joint_state_publisher" type="joint_state_publisher" name="joint_state_publisher">
<param name="use_gui" value="1" />
</node>
</launch>
작성된 URDF에 대한 검증 작업
로봇의 동작 범위, 모델(Mesh) 등등 검증
$ roslaunch safe_arm_description safe_arm_publisher.launch
$ rosrun rqt_rviz rqt_rviz

http://wiki.ros.org/robot_state_publisherrobot_state_publisher
/joint_states 토픽을 구독하여, /tf로 출력
robot_description 파라미터에 명시된 로
봇의 정보를 이용하여 Joint의 각도값, 링크
의 3D 포즈, 로봇의 기구학적 트리 등에 대
한 정보를 /tf로 Publish한다.

http://wiki.ros.org/joint_state_publisherjoint_state_publisher
robot_description 파
라미터에 명시된 로봇의
Joint 정보를 이용하여
Joint의 각도값을
Publish한다.

Gazebo를 이용한 시뮬레이션

Gazebo
3D 로봇 시뮬레이터로 다양한 종류의 물리엔진을 지원하여 동력한 시뮬레이션을 지원, 추가로 일반적으로 사용되는 센서(LRF, 카메라,
Depth Sensor, 접촉센서, 힘-토크센서 등)을 지원함.

safe_arm gazebo 실행
$ roslaunch safe_arm_bringup sim.launch
<launch>
<arg name="paused" default="false"/>
<arg name="use_sim_time" default="true"/>
<arg name="gui" default="true"/>
<arg name="headless" default="false"/>
<arg name="debug" default="false"/>
<include file="$(find safe_arm_bringup)/launch/empty_world.launch">
<arg name="debug" value="$(arg debug)" />
<arg name="gui" value="$(arg gui)" />
<arg name="paused" value="$(arg paused)"/>
<arg name="use_sim_time" value="$(arg use_sim_time)"/>
<arg name="headless" value="$(arg headless)"/>
</include>
<param name="robot_description" command="$(find xacro)/xacro.py $(find safe_arm_description)/urdf/safe_arm_v1.urdf.xacro" />
<node name="urdf_spawner" pkg="gazebo_ros" type="spawn_model" respawn="false" output="screen"
args="-urdf -model safe_arm -param robot_description"/>
</launch>

<launch>

<arg name="paused" default="false"/>
<arg name="use_sim_time" default="true"/>
<arg name="gui" default="true"/>
<arg name="headless" default="true"/>
<arg name="debug" default="false"/>
<arg name="verbose" default="false"/>
<arg name="world_name" default="worlds/empty.world"/> 

<group if="$(arg use_sim_time)">
<param name="/use_sim_time" value="true" />
</group>

<arg unless="$(arg paused)" name="command_arg1" value=""/>
<arg if="$(arg paused)" name="command_arg1" value="-u"/>
<arg unless="$(arg headless)" name="command_arg2" value=""/>
<arg if="$(arg headless)" name="command_arg2" value="-r"/>
<arg unless="$(arg verbose)" name="command_arg3" value=""/>
<arg if="$(arg verbose)" name="command_arg3" value="--verbose"/>
<arg unless="$(arg debug)" name="script_type" value="gzserver"/>
<arg if="$(arg debug)" name="script_type" value="debug"/>

<node name="gazebo" pkg="gazebo_ros" type="$(arg script_type)" respawn="false" output="screen"
args="$(arg command_arg1) $(arg command_arg2) $(arg command_arg3) $(arg world_name) -e simbody" />

<group if="$(arg gui)">
<node name="gazebo_gui" pkg="gazebo_ros" type="gzclient" respawn="false" output="screen"/>
</group>
</launch>
empty.world 기존 empty_world에서 물리엔진 선택 부분 추가

➔ Lower entry barrier for exposing HW to ROS
➔ Promote reuse of control code 
➔ Provide ready-to-use tools 
➔ Real-time ready implementation
☐ Goal
➔ pr2_controller_manager (2009) 
- developed mainly by Willow Garage (WG)
- PR2-specific 
➔ ros_control (late 2012)
- started by hiDOF, in collaboration with WG  
- continuedbyPALRoboticsandcommunity  
- robot-agnostic version of the pr2_controller_manager  
☐ History

Controllers
• effort_controllers

◦ joint_effort_controller

◦ joint_position_controller

◦ joint_velocity_controller

• joint_state_controller

◦ joint_state_controller

• position_controllers

◦ joint_position_controller

• velocity_controllers

◦ joint_velocity_controllers
• Joint Command Interfaces

◦ Effort Joint Interface

◦ Velocity Joint Interface

◦ Position Joint Interface

• Joint State Interfaces

• Actuator State Interfaces

• Actuator Command Interfaces

◦ Effort Actuator Interface

◦ Velocity Actuator Interface

◦ Position Actuator Interface

• Force-torque sensor Interface

• IMU sensor Interface
Hardware Interfaces
!! You can of course create your own

<?xml version="1.0"?>
<robot xmlns:xacro="http://ros.org/wiki/xacro">
<xacro:macro name="insert_transmission" params="name">
<transmission name="${name}_tran">
<type>transmission_interface/SimpleTransmission</type>
<joint name="${name}">
</joint>
<actuator name="${name}_motor">
<mechanicalReduction>1</mechanicalReduction>
</actuator>
</transmission>
</xacro:macro>
</robot>
safe_arm_v1.transmission.xacro
<xacro:insert_transmission name="${side}_shoulder_yaw_joint" />

safe_arm:
joint_state_controller:
type: joint_state_controller/JointStateController
publish_rate: 100
safe_arm_joint_state.yaml
<launch>
<rosparam file="$(find safe_arm_control)/config/safe_arm_joint_state.yaml" command="load"/>
<node name="joint_controller_spawner" pkg="controller_manager" type="spawner" respawn="false"
output="screen" ns="/safe_arm" args="joint_state_controller" />
<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher"
respawn="false" output="screen">
<remap from="/joint_states" to="/safe_arm/joint_states" />
</node>
</launch>
safe_arm_joint_state_controller.launch
std_msgs/Header header

string[] name

float64[] position

float64[] velocity

float64[] effort
sensor_msgs/JointState Message

safe_arm:
l_arm_joint_controller:
type: "effort_controllers/JointTrajectoryController"
joints:
- l_shoulder_yaw_joint
- l_shoulder_pitch_joint
- l_shoulder_roll_joint
- l_underarm_joint
- l_elbow_pitch_joint
- l_elbow_yaw_joint
- l_wrist_pitch_joint
- l_wrist_roll_joint
gains:
l_shoulder_yaw_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_shoulder_pitch_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_shoulder_roll_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_underarm_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_elbow_pitch_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_elbow_yaw_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_wrist_pitch_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
l_wrist_roll_joint:
{p: 1500.0, i: 0.01, d: 0.1, i_clamp: 1000}
safe_arm_l_control.yaml
<launch>
<rosparam file="$(find safe_arm_control)/config/safe_arm_l_control.yaml"
command="load"/>
<node name="l_controller_spawner" pkg="controller_manager" type="spawner"
respawn="false"
output="screen" ns="/safe_arm" args="l_arm_joint_controller"/>
</launch>
safe_arm_l_controller.launch

safe_arm:
r_arm_joint_controller:
type: "effort_controllers/JointTrajectoryController"
joints:
- r_shoulder_yaw_joint
- r_shoulder_pitch_joint
- r_shoulder_roll_joint
- r_underarm_joint
- r_elbow_pitch_joint
- r_elbow_yaw_joint
- r_wrist_pitch_joint
- r_wrist_roll_joint
gains:
r_shoulder_yaw_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_shoulder_pitch_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_shoulder_roll_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_underarm_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_elbow_pitch_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_elbow_yaw_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_wrist_pitch_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
r_wrist_roll_joint:
{p: 1000.0, i: 0.05, d: 0.1, i_clamp: 1000}
safe_arm_r_control.yaml
<launch>
<rosparam file="$(find safe_arm_control)/config/safe_arm_r_control.yaml"
command="load"/>
<node name="r_controller_spawner" pkg="controller_manager" type="spawner"
respawn="false"
output="screen" ns="/safe_arm" args="r_arm_joint_controller"/>
</launch>
safe_arm_r_controller.launch

safe_arm_bringup/bringup.launch
<launch>
<include file="$(find safe_arm_bringup)/launch/safe_arm_sim.launch" />
<include file="$(find safe_arm_control)/launch/safe_arm_joint_state_controller.launch" />
<include file="$(find safe_arm_control)/launch/safe_arm_l_controller.launch" />
<include file="$(find safe_arm_control)/launch/safe_arm_r_controller.launch" />
</launch>

MoveIt MoveIt! is state of the art software for mobile manipulation, incorporating the latest advances in
motion planning, manipulation, 3D perception, kinematics, control and navigation
http://www.youtube.com/watch?v=dblCGZzeUqs

MoveIt Setup Assistant
http://docs.ros.org/hydro/api/moveit_setup_assistant/html/doc/tutorial.html
MoveIt와 로봇과의 연동을 위한 환경설정 GUI
결과물로 각종 MoveIt 패키지와 SRDF(Semantic Robot Description Format) 생성
$ roslaunch moveit_setup_assistant setup_assistant.launch

MoveIt과 연동할 로봇의 URDF를 불러옴. XACRO로 되어 있어도 무방 정상적으로 불러온 것을 확인

Sampling Density를 최대값으로 올리고, 모델 링크간의 충돌에 대한
매트릭스 생성

외부환경과 로봇과의 연결을 위한 가상 조인트(고정) 생성

Planning 그룹 설정. safe_arm의 경우, 왼쪽과 오른쪽 팔 두개의 Planning 그룹을 생성함

왼쪽팔에 대한 조인트 그룹, 링크 그룹, Kinematic Chain을 설정해 준다.

왼쪽팔에 대한 조인트 그룹, 링크 그룹, Kinematic Chain을 설정해 준다.
오른쪽 팔에 대해서도 같은 방법으로 설정

로봇의 기본 자세 (Homing Position, Ready, etc)를 만들어준다. (선택사항)

마지막으로 catkin workspace 내에 패키지가 저장될 곳을 선택한 후, 패키지 생성 완료

MoveIt Setup에 대한 검증
$ roslaunch safe_arm_moveit_config demo.launch

MoveIt과 Gazebo와의 연동을 위한 추가 작업
MoveIt Config 패키지 저장 장소가 ~/catkin_ws/src/safe_arm_moveit_config라고 가정
MoveIt Controller Manager 설정
safe_arm_moveit_config/config/controllers.yaml 파일 생성
controller_list:
- name: "safe_arm/l_arm_joint_controller"
action_ns: follow_joint_trajectory
type: FollowJointTrajectory
joints:
- l_shoulder_yaw_joint
- l_shoulder_pitch_joint
- l_shoulder_roll_joint
- l_underarm_joint
- l_elbow_pitch_joint
- l_elbow_yaw_joint
- l_wrist_pitch_joint
- l_wrist_roll_joint
- name: "safe_arm/r_arm_joint_controller"
action_ns: follow_joint_trajectory
type: FollowJointTrajectory
joints:
- r_shoulder_yaw_joint
- r_shoulder_pitch_joint
- r_shoulder_roll_joint
- r_underarm_joint
- r_elbow_pitch_joint
- r_elbow_yaw_joint
- r_wrist_pitch_joint
- r_wrist_roll_joint
ros_control 설정시 보았던 controller의 이름과 Joint 리스트를 적어줌.

<launch>

<arg name="moveit_controller_manager" default="moveit_simple_controller_manager/MoveItSimpleControllerManager" />
<param name="moveit_controller_manager" value="$(arg moveit_controller_manager)"/>

<arg name="use_controller_manager" default="true" />
<param name="use_controller_manager" value="$(arg use_controller_manager)" />

<rosparam file="$(find safe_arm_moveit_config2)/config/controllers.yaml"/>
</launch>
safe_arm_moveit_conﬁg/conﬁg/safe_arm_moveit_controller_manager.launch.xml 파일 수정

<launch>
<include file="$(find safe_arm_bringup)/launch/safe_arm_sim.launch" />
<include file="$(find safe_arm_control)/launch/safe_arm_joint_state_controller.launch" />
<include file="$(find safe_arm_control)/launch/safe_arm_l_controller.launch" />
<include file="$(find safe_arm_control)/launch/safe_arm_r_controller.launch" />
<include file="$(find safe_arm_moveit_config)/launch/move_group.launch" />
<include file="$(find safe_arm_moveit_config)/launch/moveit_rviz.launch">
<arg name="config" value="true" />
</include>
<include file="$(find safe_arm_moveit_config)/launch/default_warehouse_db.launch" />
</launch>
$ roslaunch safe_arm_bringup bringup.launch
safe_arm_bringup/launch/bringup.launch
Demo

Real Robot?

Q&A?
byeongkyu@gmail.com
http://ahnbk.com
http://facebook.com/ahnbk

Modeling and Control Robot Arm using Gazebo, MoveIt!, ros_control

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to Modeling and Control Robot Arm using Gazebo, MoveIt!, ros_control

Similar to Modeling and Control Robot Arm using Gazebo, MoveIt!, ros_control (20)

Recently uploaded

Recently uploaded (20)

Modeling and Control Robot Arm using Gazebo, MoveIt!, ros_control