Add virt-network-rhel7-kvm
•
0 likes•256 views
How to add virtual network to RHEL7 Box ? Virtual Bridge Centos7 Redhat Enterprise Linux 7
Recommended
More Related Content
What's hot
What's hot (10)
Viewers also liked
Viewers also liked (20)
Similar to Add virt-network-rhel7-kvm
Similar to Add virt-network-rhel7-kvm (20)
Recently uploaded
Recently uploaded (20)
Add virt-network-rhel7-kvm
- 1. How to add virtual network to RHEL7 Box ? Step1 - Open the virtual manager for KVM by running command #virt-manager as below
- 2. Step2 - From the management interface press edit connection details
- 3. Step3 - From Virtual Network tab press on the + sign on the left corner
- 4. Step4 -Add your virtual network name
- 5. Step 5 - Add your IPv4 address ranger
- 6. Step6 - If you like to enable IPv6 IPV6 Network 2016:2015:2014:2013::/64 Start Range: 2016:2015:2014:2013:0:0:0:0 End Range: 2016:2015:2014:2013:ffff:ffff:ffff:ffff No. of host: 18446744073709551616
- 7. Step7 - Select how the virtual network replicate with which interface default NAT
- 8. Step8 - Review & verify your virtual network [root@ ALAA LAB01 RHCS A- RHCE] # ifconfig | grep -i virbr* virbr3: flags=4 099<U P,BRO ADCA ST,MU LTICA ST> mtu 1500 inet 192.168.50.1 netmask 255.255.255.0 broadcast 192.168.50.255 inet6 2016:2015:2014:2013::1 prefixlen 64 scopeid 0x0<global> ether 52:54:00:08:4a:55 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@ALAALAB01 RHCSA-RHCE]# ping 192.168.50.1 PING 192.168.50.1 (192.168.50.1) 56(84) bytes of data. 64 bytes from 192.168.50.1: icmp_seq=1 ttl=64 time=0.098 ms Thanks BR see you next post ALAA HEGGA