Process Safety Management
•
1 like•396 views
The Problem Unexpected releases of toxic, reactive, or flammable liquids and gases in processes involving highly hazardous chemicals have been reported for many years. Incidents continue to occur in various industries that use highly hazardous chemicals which may be toxic, reactive, flammable, or explosive, or may exhibit a combination of these properties. Regardless of the industry that uses these highly hazardous chemicals, there is a potential for an accidental release any time they are not properly controlled. This, in turn, creates the possibility of disaster.
![Discover key skills to effectively audit health and safety programmes in a plant environment
Gain an understanding of process safety management auditing and the core issues of effective plant safety
Apply lessons learned to processes and programmes at your own facility for success
Effectively develop and manage audit and inspection programmes to operate your facility safely
A process safety audit is an important tool in helping to establish, measure, maintain and improve process safety performance.
Audits compare your organization’s performance against established standards.
When properly conducted, an audit can help to identify and correct regulatory deficiencies, which, in turn, can improve
workplace safety and help reduce liability.
Audits can serve to increase employee awareness and understanding of environmental and safety regulations, and the audit
process can also be an opportunity to demonstrate your company's commitment to compliance.
Workplace audits may be viewed favorably by regulatory agencies. A thoroughly completed audit with proper follow-up can
signal that your company is making a good-faith effort to comply with applicable regulatory requirements.
While the need for process manufacturers to protect their people, their plant and their community is ever present, today's
economic and political climate adds new challenges. Traditional approaches to safety are no longer sufficient. Tightening risk
tolerance, and more stringent health, regulatory and environmental licensing requirements, are putting greater focus on plant
safety. The need for greater asset utilization and protection is driving development of functional safety-related skills and
competencies for operators and maintenance personnel. This all comes at a time when globalization, technology advances and
numerous other factors are dramatically accelerating the pace of business. Decisions that used to be made monthly must now
be made in minutes – and sometimes even in seconds.
Key benefits of attending:
What you will gain:
PROCESS SAFETY MANAGEMENT &
PLANT SAFETY AUDITS
Mr. Raju Desai is an Industry veteran Chemical Engineer and Safety Professional with over 40 years of
experience on industrial and process safety in chemical and petrochemical domain.
Mr. Desai is having extensive experience as a result oriented departmental head of workplace and
process safety unit of Reliance Industries Limited (RIL) with prestigious credentials such as PDIS (Post
Diploma in Industrial Safety), CDM (Certified in Disaster Management) and Process Safety Professional
in this field. Currently, working as an Independent Safety Consultant and helping organizations by
providing consultancy services as a safety expert on contractual basis and had conducted many training
programs and workshops on various focused topics of workplace safety and process safety
management.
He has participated in 21st International Conference on Process Safety at Orlando, Florida, USA,
organized by Center for Chemical Process Safety (CCPS), a wing of American Institute of Chemical
Engineers, (AIChE) USA.
Mr. Desai is a Process Safety Professional in-service trained by M/s. DuPont, USA on various workplace
and process safety elements at Reliance Industries Ltd, Vadodara.
Mr. Desai had successfully executed special International Program on Awareness and preparedness for
emergencies at local level (APELL) and Chemical Emergency Preparedness and Prevention (CEPP)
which was organized in collaboration with NSC, Mumbai, DISH Gujarat State, IPCL, World Environment
Center (WEC), USA and United Nations Environment Program Industry & Environment (UNEP/IE),
Paris.
He has received “S Ramamurthy Award” in 2001 for excellent performance by securing First Rank in
Post Diploma in Industrial Safety (PDIS) course. This award was presented by Hon. Minister of Labour &
Employment, Gujarat at 23rd Gujarat State Safety Conference, Vadodara.
Mr. Desai is an associated Member of Indian Institute of Chemical Engineers, [IIChE] Kolkata and
presently holding “Vice Chairman” position for Baroda Chapter of Indian Institute of Chemical Engineers,
(IIChE BRC).
Course Faculty: Mr. Raju Desai,
since: 1980
training the professionals
R
For Registration: Email us on: info@marcepinc.com or Call on: 022 - 30210100
rd th
03 - 04 October th th
07 - 08 October
2016 AHMEDABAD 2016 CHENNAI
th st
30 Sept. & 01 October
2016 KOLKATA](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Recommended
More Related Content
What's hot
What's hot (20)
Viewers also liked
Similar to Process Safety Management
Similar to Process Safety Management (20)
More from Marcep Inc.
More from Marcep Inc. (20)
Recently uploaded
Recently uploaded (20)
Process Safety Management
- 1. PROCESS SAFETY MANAGEMENT PLANT SAFETY AUDITS & rd th 03 - 04 October th th 07 - 08 October 2016 AHMEDABAD 2016 CHENNAI since: 1980 training the professionals R For Registration: Email us on: info@marcepinc.com or Call on: 022 - 30210100 Register 8 delegates and pay for 5 Register 6 delegates and pay for 4 Register 4 delegates and pay for 3 th Ends at: 16 September 2016 You spoke, we listened. Group discount now available! th st 30 Sept. & 01 October 2016 KOLKATA
- 2. Discover key skills to effectively audit health and safety programmes in a plant environment Gain an understanding of process safety management auditing and the core issues of effective plant safety Apply lessons learned to processes and programmes at your own facility for success Effectively develop and manage audit and inspection programmes to operate your facility safely A process safety audit is an important tool in helping to establish, measure, maintain and improve process safety performance. Audits compare your organization’s performance against established standards. When properly conducted, an audit can help to identify and correct regulatory deficiencies, which, in turn, can improve workplace safety and help reduce liability. Audits can serve to increase employee awareness and understanding of environmental and safety regulations, and the audit process can also be an opportunity to demonstrate your company's commitment to compliance. Workplace audits may be viewed favorably by regulatory agencies. A thoroughly completed audit with proper follow-up can signal that your company is making a good-faith effort to comply with applicable regulatory requirements. While the need for process manufacturers to protect their people, their plant and their community is ever present, today's economic and political climate adds new challenges. Traditional approaches to safety are no longer sufficient. Tightening risk tolerance, and more stringent health, regulatory and environmental licensing requirements, are putting greater focus on plant safety. The need for greater asset utilization and protection is driving development of functional safety-related skills and competencies for operators and maintenance personnel. This all comes at a time when globalization, technology advances and numerous other factors are dramatically accelerating the pace of business. Decisions that used to be made monthly must now be made in minutes – and sometimes even in seconds. Key benefits of attending: What you will gain: PROCESS SAFETY MANAGEMENT & PLANT SAFETY AUDITS Mr. Raju Desai is an Industry veteran Chemical Engineer and Safety Professional with over 40 years of experience on industrial and process safety in chemical and petrochemical domain. Mr. Desai is having extensive experience as a result oriented departmental head of workplace and process safety unit of Reliance Industries Limited (RIL) with prestigious credentials such as PDIS (Post Diploma in Industrial Safety), CDM (Certified in Disaster Management) and Process Safety Professional in this field. Currently, working as an Independent Safety Consultant and helping organizations by providing consultancy services as a safety expert on contractual basis and had conducted many training programs and workshops on various focused topics of workplace safety and process safety management. He has participated in 21st International Conference on Process Safety at Orlando, Florida, USA, organized by Center for Chemical Process Safety (CCPS), a wing of American Institute of Chemical Engineers, (AIChE) USA. Mr. Desai is a Process Safety Professional in-service trained by M/s. DuPont, USA on various workplace and process safety elements at Reliance Industries Ltd, Vadodara. Mr. Desai had successfully executed special International Program on Awareness and preparedness for emergencies at local level (APELL) and Chemical Emergency Preparedness and Prevention (CEPP) which was organized in collaboration with NSC, Mumbai, DISH Gujarat State, IPCL, World Environment Center (WEC), USA and United Nations Environment Program Industry & Environment (UNEP/IE), Paris. He has received “S Ramamurthy Award” in 2001 for excellent performance by securing First Rank in Post Diploma in Industrial Safety (PDIS) course. This award was presented by Hon. Minister of Labour & Employment, Gujarat at 23rd Gujarat State Safety Conference, Vadodara. Mr. Desai is an associated Member of Indian Institute of Chemical Engineers, [IIChE] Kolkata and presently holding “Vice Chairman” position for Baroda Chapter of Indian Institute of Chemical Engineers, (IIChE BRC). Course Faculty: Mr. Raju Desai, since: 1980 training the professionals R For Registration: Email us on: info@marcepinc.com or Call on: 022 - 30210100 rd th 03 - 04 October th th 07 - 08 October 2016 AHMEDABAD 2016 CHENNAI th st 30 Sept. & 01 October 2016 KOLKATA
- 3. Process Safety Management - An overview History and Brief on Elements of Process Safety OSHA Requirements of PSM Recognizing Operational & Managing Operational Risk Mechanical Integrity & Quality Assurance Contractor Management Group Discussion, Validation, closing remarks and Feedback Process Safety Information Process Hazard Analysis Safe Operating Procedures / Work Practices Training and Performance Incident Investigation Management of Change & Pre-Start- Up Review Emergency Response Introduction Purpose of Audits Equipment Inspection and Auditing Statutory Aspects for Plant Safety Audit Safety Audits Objectives & Goal Audit Terminology Developing Audit Protocol Auditing skills and its development Safety Audit Process Conducting effective safety inspection and audits Tips to conduct effective safety audits Role and Responsibilities of Audit Team Auditor Attributes Audit Report preparation Audit pitfall Group Discussion, Validation, closing remarks and Feedback PROCESS SAFETY MANAGEMENT & PLANT SAFETY AUDITS since: 1980 training the professionals R Day - One PSM Day - Two PSA & Inspection Two days training agenda: For Registration: Email us on: info@marcepinc.com or Call on: 022 - 30210100 rd th 03 - 04 October th th 07 - 08 October 2016 AHMEDABAD 2016 CHENNAI th st 30 Sept. & 01 October 2016 KOLKATA