This is the presentation about Welesgard coating appilcations in the field of protection of different Oil and Gas structures like ofhsore platfroms, tanks, pipes, etc.
1. Oil and Gas application
Welesgard
Anti-corrosion and protection coating systems
2. TM
Steel and concrete structures:
•Operated in tough and hazardous conditions
•Exposed to environments with high corrosion aggressiveness
•Subject to abrasion, solar radiation, extreme temperatures and alternating
mechanical and chemical stress
Welesgard provides reliable protective coatings solutions
against corrosion:
•Offshore fixed and floating platforms
•Storage tanks for oil and gas
•Pipelines underground, underwater and ground-laying
•Various infrastructure facilities with extreme temperature conditions
Oil & Gas
3. Storage tanks for oil and gas
Welesgard developed super reliable anticorrosion coating protection for internal and
external sides of tanks, gas holders, etc.
•Exterior:
WG Ferogalvanic
WG Weleflex
WG Sulacover
•Interior:
WG Weleforce
4. Advantages of Welesgard coatings for tanks:
•Exterior:
One component polyurethane protective system
Can be applied at high relative humidity of air (up to 99%)
No restriction on a dew point.
Low content of volatile organic compounds.
Resistant to impact and abrasion.
Remain flexible with time.
•Interior:
High chemical resistance to oil products and produced water
High abrasive resistance
7. Oil and Gas pipelines.
Welesgard has a series of coating systems designed for exterior and interior protection
of pipelines, fittings, armature immersed in fresh or sea water, and also buried
underground.
8. Advantages of Welesgard coatings for pipelines:
•Can be applied with a thickness up to 6 mm in one technological cycle without
coating defects.
•When applying by spraying the material is cured in few minutes
•High adhesion to steel (>18 MPa)
•Have a high impact strength (>20 J)
•Abrasion resistance (100-130 mg loss of weight in 1000 cycles - 1 kg of load - wheel
H-17).
•Performs very high UV, water, chemical, corrosion resistance
•More technological in comparison to other material
•Meets requirements of ISO 10290 and other standards
9. References:
Location Caspian Sea Offshore
Project Pipeline offshore pipeline
Location Odessa Nearshore
Project Gas pipeline system
11. Oil and Gas Offshore
Anti corrosion protection of different offshore fixed and floating structures.
•Submerged zone
•Splash zone
•Atmosphere zone
•Platform decks
•Helicopter decks
•Separators and pipes
•Oil rigs torch lighter
12. Advantages of Welesgard coatings for offshore:
•One component polyurethane system
•Can be applied at high relative humidity of air (up to 99%)
•No restriction on a dew point.
•Resistant to impact and abrasion.
•Remain flexible with time.
•Tolerant to surface preparation
•Compatible with cathodic protection
•Guaranteed life time in the open sea condition up to 30 years
•Meets the highest international requirements requirements of
Norsok M501 and ISO 20340
16. High temperature applications
TERMA series for anti corrosion protection for very high temperatures operation
environment. One component moisture cured silicon based coating systems.
WG-Termаprime up to +400°С.
WG-Termafinish up to +700°С.
•Oil refineries
•Gas compression stations
•Oil rigs torch lighters
•Furnaces
18. «Rheinheim SA» is Welesgard® trademark owner
and international distributor.
Rue de la Servette 93
1202 Geneva SWITZERLAND
Tel: +41 22 501 7732
sales@welesgard.com
www.welesgard.com