Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Smart home energy management system using ieee 802.15.4 and zigbee

2,548 views

Published on

embedded systems, ieee-2013,
khadarbaba shaik
skesystems.com
7842522786
9948887244

Published in: Education, Business, Technology
  • ⇒⇒⇒WRITE-MY-PAPER.net ⇐⇐⇐ has really great writers to help you get the grades you need, they are fast and do great research. Support will always contact you if there is any confusion with the requirements of your paper so they can make sure you are getting exactly what you need.
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • If you are looking for trusted essay writing service I highly recommend ⇒⇒⇒WRITE-MY-PAPER.net ⇐⇐⇐ The service I received was great. I got an A on my final paper which really helped my grade. Knowing that I can count on them in the future has really helped relieve the stress, anxiety and workload. I recommend everyone to give them a try. You'll be glad you did.
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here

Smart home energy management system using ieee 802.15.4 and zigbee

  1. 1. Embedded systems Ph:7842522786 9948887244 2013 SMART HOME ENERGY MANAGEMENT SYSTEM USING IEEE 802.15.4 AND ZIGBEE Moving towards the smart energy management will require changes not only in the way energy is supplied, but in the way energy market requires two types of Zigbee networks for device control and energy management. These include neighborhood area networks for energy, using Zigbee for sub energy within a home or apartment, and using Zigbee to communicate to devices within the home. Recently, organizations use Zigbee to effectively deliver solutions for a variety of areas including consumer electronic device control, energy management and efficiency home and commercial building automation as well as industrial plant management. As an ecosystem, the Agreement offers everything future product and service companies need to develop Zigbee products. The smart energy networks could include Zigbee IEEE 802.15.4. It is suggested that the majority of the nodes in the network should be based on one stack profile or the other to get reliable performance. Zigbee smart energy certified products must be based upon a Zigbee Compliant Platform. Existing System: Existing system employed with wired connection. Wired system requires proper planning and construction works for efficient and clean design. It is the reason wireless communications are replacing the wired ones. Proposed System: The proposed system works in two modes, energy management mode and home security mode. When the system is in energy management mode, the PIR sensor checks whether there is any human motion around that area. If it founds a human motion then it checks LDR for brightness, and then switches on the corresponding lights. The simplest lighting control system turns off lights at a specified time when the building is assumed to be empty, and turns lights back on again before people arrive for work the next time. skesystems@gmail.com Vijayawada Hyderabad Page 1
  2. 2. Embedded systems Ph:7842522786 9948887244 2013 Whenever the user goes out of the home he has to select home security mode. If the system is in home security mode the controller stops the lightings in home and checks the PIR sensor for any human motion, if it founds any human movement then it sends the warning message to the control centre to avoid theft. By the mean time it also checks the gas leakage using gas sensor. When the gas leakage is found in home the controller sends the warning message to the control centre to avoid fire accidents. We address a new smart home control system based on sensor networks to make home networks more intelligent and automatic. Block Diagram: Home Node: Power Supply 100 80 LDR1 Zigbee Transceiver 60 PIC LDR2 PIR Sensor East West 40 Micro 20 LCD North 0 Controller 1st Qtr 2nd Qtr 3rd Qtr 4th Qtr 16f877A Relay Driver Relay Driver Gas Sensor Device 1 Device 2 Mode Select Switch skesystems@gmail.com Vijayawada Hyderabad Page 2
  3. 3. Embedded systems Ph:7842522786 9948887244 2013 Main Node: Zigbee Transceiver MAX 232 Hardware Requirements:  PIC16F877A  Gas sensor  PIR Sensor  Light Dependent Resistor  ZIGBEE Transceiver  LCD  Max232  PC Software Requirements:  Embedded C  MP Lab or CCS Compiler  VB .NET Advantage: skesystems@gmail.com Vijayawada Hyderabad Page 3
  4. 4. Embedded systems Ph:7842522786 9948887244 2013 Since our proposed system is built over wireless sensor network, it is a cheap, flexible, and easily installable system. Using power saving mode it switches OFF the unwanted lights to reduce power consumption. skesystems@gmail.com Vijayawada Hyderabad Page 4

×