2. 1.Introduction
Manual works are being replaced
by automated and semi-
automated machines.
Automations have improved the
quality of the product and
efficiency of the plant.
4. Features of CAD
Designers can easily create original
concepts or adapt existing ideas.
Software are available for fabric
designing, fashion design, pattern
making, grading and marker planning.
Communication tools helps us to
interact with the software and visualize
the exact output that we want.
5. Comparison between CAD
system and Manual system
C- computerized
M- manual
Reference:”Manual v/s CAD/CAM system in garment industry” ,
V.Parthasarathi, Indian Textile Journal, Feb 2010.
9. •Laser cutting is clean and
silent.
• The beam can be
focalized on an extremely
small area (from 0.1 to
1mm in diameter).
• Unlike water and
traditional cutting systems,
light exerts no mechanical
pressure on the piece.
• The laser is a non-contact
instrument that guarantees.
10. Cutting Efficiency
(computerized v/s manual)
C- computerized
M- manual
Reference:”Manual vs CAD/CAM system in garment industry” ,
V.Parthasarathi, Indian Textile Journal, Feb 2010.
11. 6.Automations in garment manufacturing:
Unit production system (UPS)
• Load all the pieces in a
product carrier.
• Product carrier with the
pieces is routed through the
different operation steps.
• At every machine/operation
the patented chain will
position the product ideally.
• Completed the product
arrives to an unloading
station.
• The empty product carrier
returns to the loading
station.
13. C- computerized
M- manual
Reference:”Manual vs CAD/CAM system in garment
industry” ,
V.Parthasarathi, Indian Textile Journal, Feb 2010.
Production Efficiency
(computerized v/s manual
Sewing)
15. Gas Fired Kannegiesser
Tunnel Finisher
Three Zones are:
1.
Heating/swelling
zone
2. Mixture of
steam/air
3. Hot air zone
16. 8. Summary
Using of computerized system for
garment manufacturing we can
observe that There is a significant
improvement in productivity, and
quality, leading to time reduction.