Feel free to call anytime at (214) 666-8704 for quick garage door repair services in Dallas, TX. For more information visit - http://www.garagedoorrepairdallas-tx.com/

1. 8 Possible Reasons Why Your Garage Door Stopped Working
1. Broken door springs
This is a mechanical problem of the door parts. The problem is very common with garage
doors. The door torsion and extension spring work on the basis of the number of cycles
covered the springs. When the number of cycles stipulated run out the spring stop
working causing the door not to respond. The spring is also susceptible to break, this is
especially when the springs are subjected to excess force. This problem is solved with
replacement of the springs by a specialist who will offer garage door repair, garage door
repair service and assistance.
2. When the sensors are misaligned
A garage door with misaligned door sensors will not respond. The sensors fail to operate
when there is a wiring problem, which will respond if the cables are tightened. The
sensors will not work if there is a barrier in the path, you will need to remove the barrier.
The sensors can also fail to respond if the sensor eye is dirty, covered with dust making it
had for commands to be detected. The sensors can be fixed by unplugging the door for a
moment to reset the door.

2. 3. Worn out cables
Door cables run along the side of the door, from bottom to top. Cables will break
simultaneously with the springs. Involve a specialist to replace your cables because it is
risky replacing them without the technical know how. The problem may also source of
power.
4. Door remote problems
The problem can be in two forms: when the remote is not working. This could be as a
result of weak batteries that can be solved with replacement of the batteries in the
remote.
The problem could also be caused by interference with the frequency of the motor and
remote.
5. Stripped Door Gear
This is a result of heavy doors with too much straining force on the opener. The symptom
will be humming noise coming from the door when opening and closing. Carry out garage
door repair in the gears and garage door service on the door opener system.
6. Bent or misaligned door track
This is the metal track that the door runs on. The track should be straight but when it is
bent the door will not open or close. The track way can also be clogged by dust or foreign
objects, which inhibit the door movement. The symptom of this problem is spacing
between the rail and rollers.
7. Faulty settings
The door failure to operate may be caused by wrong settings set on the door. The settings
can be open and close door limits or wrong frequencies set in the door. The door will fail
to respond to commands becoming non-operational. If the sensitivity settings for a new
door are too high the door won’t open, the door will not be detected to have enough
weight.

3. 8. Old door
A garage door has a service life of up to 12 years, but the door may stop working earlier.
The garage door is the biggest moving part in a home. The door will with time become
lose. The door is also susceptible to wear and tear. The door continued repairs would be
making the door weak; time comes when the door has to retire.
Feel free to call anytime at (214) 666-8704 for quick garage door repair services in Dallas,
TX. For more information visit - http://www.garagedoorrepairdallas-tx.com/