1. 1352-SERIES Data Sheet Ref. No : SU-1352-00001
Electrically Operated Ball Valve MODEL NO.: SUDE
Technical Specifications 13525040BSPRBCSS6TPROP PUNE / BANGALORE
SD-1000-05CPT200POT2LSSERVO
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH
SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
Port Size 40mm
End connection BSP Screwed
Body Material Carbon Steel
Ball Material SS316
Seating material Teflon
Flowing medium Non-injurious to Body Ball & Seals
Pressure 10 Bar
Reduce Bore Single piece design, Antistatic fire safe
Type of construction
Ball valve
Temperature Ambient
Characteristic Proportionate
Sdtork Make Single Phase Quarter Turn Electric
Fitted with
Actuator Supply Voltage 230 V AC.
ACTUATOR DETAILS
3.1 Model SD-1000-05
3.2 Output motion type Linear
3.3 Output Torque ( Nm ) 50 Nm
3.4 Output speed ( Sec/90 °) 17 sec/90°
3.5 Manual hand wheel PROVIDED
3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating:
2 Nos 5 A, 230 V AC
3.7 Torque limit switches Not required, AS 1000-series actuator are provided with
stall duty motor
3.8 Local indicator PROVIDED
3.9 Class of Protection IP67
3.10 Weight of the actuator (Kgs.) 9 kgs.
3.11 Duty S2-10 min
3.12 Mounting
3.14 G. A. Drawing Reference No
3.15 Electrical Wiring Diagram Ref, No
MOTOR DETAILS
4.1 Type Reversible Single Phase Synchronous Stall Duty Motor
4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply
4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.

2. 4.4 Insulation Class F
4.5 Rating ( Watts) 110 Watts
OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Provided
Feed back : 100-235 Ohms,
5.7 Local Push Button This will consist of Auto /Off / Manual Provided
Station selector switch, Open/Close push buttons.
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

3. 1352-SERIES Data Sheet Ref. No : SD-1352-00002
Electrically Operated Ball Valve MODEL NO.: SUDE
Technical Specifications 13525040BSPRBCSS6TONF PUNE / BANGALORE
SD-1000-052LS
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH
SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
Port Size 40mm
End connection BSP Screwed
Body Material Carbon Steel
Ball Material SS316
Seating material Teflon
Flowing medium Non-injurious to Body Ball & Seals
Pressure 10 Bar
Reduce Bore Single piece design, Antistatic fire safe
Type of construction
Ball valve
Temperature Ambient
Characteristic On/Off Type
Sdtork Make Single Phase Quarter Turn Electric
Fitted with
Actuator Supply Voltage 230 V AC.
ACTUATOR DETAILS
3.1 Model SD-1000-05
3.2 Output motion type Linear
3.3 Output Torque ( Nm ) 50 Nm
3.4 Output speed ( Sec/90 °) 17 sec/90°
3.5 Manual hand wheel PROVIDED
3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating:
2 Nos 5 A, 230 V AC
3.7 Torque limit switches Not required, AS 1000-series actuator are provided with
stall duty motor
3.8 Local indicator PROVIDED
3.9 Class of Protection IP67
3.10 Weight of the actuator (Kgs.) 9 kgs.
3.11 Duty S2-10 min
3.12 Mounting
3.14 G. A. Drawing Reference No
3.15 Electrical Wiring Diagram Ref, No
MOTOR DETAILS
4.1 Type Reversible Single Phase Synchronous Stall Duty Motor
4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply

4. 4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.
4.4 Insulation Class F
4.5 Rating ( Watts) 110 Watts
OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Not Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.7 Local Push Button This will consist of Auto /Off / Manual Not Provided
Station selector switch, Open/Close push buttons.
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

5. 1358-SERIES Data Sheet Ref. No : SU-1358-00001
Electrically Operated Plastic Ball MODEL NO.: SUDE
Valve Technical Specifications 135850PVCPVCTPROPBSPSD- PUNE / BANGALORE
1000-052LSPOTSERVOCPT200
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED
WITH SINGLE PHASE QUARTER TURN ELECTRIC
ACTUATOR
2. MAKE SUDE
3 APPLICATION
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
End connection BSP Screwed
Body Material PVC
Ball Material PVC
Seating material Teflon
Flowing medium Acid
Pressure 10 Bar
Temperature Ambient
Characteristic Proportionate
Sdtork Make Single Phase Quarter Turn Electric
Fitted with
Actuator Supply Voltage 230 V AC.
ACTUATOR DETAILS
3.1 Model SD-1000-05
3.2 Output motion type Linear
3.3 Output Torque ( Nm ) 50 Nm
3.4 Output speed ( Sec/90 °) 17 sec/90°
3.5 Manual hand wheel PROVIDED
3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating:
2 Nos 5 A, 230 V AC
3.7 Torque limit switches Not required, AS 1000-series actuator are provided with
stall duty motor
3.8 Local indicator PROVIDED
3.9 Class of Protection IP65
3.10 Weight of the actuator (Kgs.) 9 kgs.
3.11 Duty S2-10 min
3.12 Mounting
3.14 G. A. Drawing Reference No
3.15 Electrical Wiring Diagram Ref, No
3.16 Weight of Actuator – Kgs
MOTOR DETAILS
4.1 Type Reversible Single Phase Synchronous Stall Duty Motor
4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply
4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.
4.4 Insulation Class F
4.5 Rating ( Watts) 110 Watts
OPTIONAL ACCESSORIES

6. 5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Provided
Feed back : 100-235 Ohms,
5.7 Local Push Button This will consist of Auto /Off / Manual Provided
Station selector switch, Open/Close push buttons.
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

7. 1358-SERIES Data Sheet Ref. No : SU-1358-00002
Electrically Operated Plastic Ball MODEL NO.: SUDE
Valve Technical Specifications 135850PVCPVCTONFBSPSD- PUNE / BANGALORE
1000-052LS
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED
WITH SINGLE PHASE QUARTER TURN ELECTRIC
ACTUATOR
2. MAKE SUDE
3 APPLICATION
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
End connection BSP Screwed
Body Material PVC
Ball Material PVC
Seating material Teflon
Flowing medium Acid
Pressure 10 Bar
Temperature Ambient
Characteristic On/Off Type
Sdtork Make Single Phase Quarter Turn Electric
Fitted with
Actuator Supply Voltage 230 V AC.
ACTUATOR DETAILS
3.1 Model SD-1000-05
3.2 Output motion type Linear
3.3 Output Torque ( Nm ) 50 Nm
3.4 Output speed ( Sec/90 °) 17 sec/90°
3.5 Manual hand wheel PROVIDED
3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating:
2 Nos 5 A, 230 V AC
3.7 Torque limit switches Not required, AS 1000-series actuator are provided with
stall duty motor
3.8 Local indicator PROVIDED
3.9 Class of Protection IP67
3.10 Weight of the actuator (Kgs.) 9 kgs.
3.11 Duty S2-10 min
3.12 Mounting
3.14 G. A. Drawing Reference No
3.15 Electrical Wiring Diagram Ref, No
MOTOR DETAILS
4.1 Type Reversible Single Phase Synchronous Stall Duty Motor
4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply
4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.
4.4 Insulation Class F
4.5 Rating ( Watts) 110 Watts
OPTIONAL ACCESSORIES

8. 5.1 Feedback Out put : 100-235 Ohms Not Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel This will consist of 2 nos. of Control Relay Not Provided
with required control voltage (If not specify,
control voltage will be 230 VAC ) Auto /
Manual selector switch, Open/Close push
buttons, emergency stop button & MCB.
5.7 Local Push Button This will consist of Auto /Off / Manual Not Provided
Station selector switch, Open/Close push buttons.
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

9. 1362-SERIES Data Sheet Ref. No : SU-1362-00001
Pneumatically Operated Ball MODEL NO.: SUDE
Valve Technical Specifications 13625040BSPRBCSS6TPROPDA0 PUNE / BANGALORE
5VPITPPT
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC
ROTARY DOUBLE ACTING ACTUATOR
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
Port Size 40mm
End connection BSP Screwed
Body Material Carbon Steel
Ball Material SS316
Seating material Teflon
Flowing medium Non-injurious to Body Ball & Seals
Pressure 10 Bar
Reduce Bore Single piece design, Antistatic fire safe Ball
Type of construction
valve
Temperature Ambient
Characteristic Proportionate
Sude Make Pneumatic DA05 Double Acting Actuator,
Fitted with Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered &
Clean Dry Air
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA05
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar

10. 4.18 Quality Of Air Filtered & Clean Dry Air
4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]
5 OPTIONAL ACCESSORIES
5.1 Valve Positioner Input signal: 60 PSI & 3 to 15 PSI Provided
5.2 I to P Converter Input signal: 22 PSI & 4-20mA Provided
5.3 Position Output: 4-20mA Provided
Transmitter
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

11. 1362-SERIES Data Sheet Ref. No : SU-1362-00002
Pneumatically Operated Ball MODEL NO.:
Valve Technical Specifications 13622520RBS6S6TONFFL15DA00
1182B2WNCMID063.1BSPBRS4BN SUDE
ONFSPC1230VACGP1182B2WNCMI PUNE / BANGALORE
D158.0BSPS4S4BNONFSPC2230VA
CGP
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC
ROTARY DOUBLE ACTING ACTUATOR
2. MAKE SUDE
3 APPLICATION Oil Weighing Machine
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 25mm
Port Size 20mm
End connection Flanged to ASA150RF
Body Material SS316
Ball Material SS316
Seating material Teflon
Flowing medium Oil
Pressure 10 Bar
Type of construction Reduce Bore Single piece design
Temperature Ambient
Characteristic On/Off Type
Sude Make Pneumatic DA00 Double Acting Actuator, Signal
Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and
Lubricated
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA00
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel

12. 4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered and Lubricated
4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]
5 OPTIONAL ACCESSORIES
5.1 Two Numbers 2 Normally Closed Construction of ¼” size – 1 no. Provided
Way Midget type & ½” – 1 no. having Coil voltage of 230 V AC
Supply in General Purpose Housing, Input signal:
Direct Acting
Pulse from the controller
Solenoid Valve
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

13. 1362-SERIES Data Sheet Ref. No : SU-1362-00003
Pneumatically Operated Ball MODEL NO.:
1362200150RBS6S6TONFFL15DA40
SUDE
Valve Technical Specifications PUNE / BANGALORE
1184D4W5P3PDCPOP066.0BSPALS4B
NSPC1230VACGPWPLSBFRLGB
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC
ROTARY DOUBLE ACTING ACTUATOR
2. MAKE SUDE
3 APPLICATION Water / Oil Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 200mm
Port Size 150mm
End connection Flanged to ASA150RF
Body Material SS316
Ball Material SS316
Seating material Teflon
Flowing medium Non-injurious to Body Ball & Seals
Pressure 10 Bar
Reduce Bore Single piece design, Antistatic fire safe Ball
Type of
construction valve
Temperature Ambient
Characteristic On/Off Type
Sude Make Pneumatic DA40 Double Acting Actuator, Signal
Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and
Lubricated
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA40
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel

14. 4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered and Lubricated
4.19 Opening and Closing 0.28 [Open] & 0.28 [Close]
Time
5 OPTIONAL ACCESSORIES
5.1 4 Way 5 Port 3 Of ¼” size having Aluminum body with Coil Provided
position Double voltage of 230 V AC Supply
Coil poppet type
solenoid valve
5.2 Weather Proof Consisting of 2 nos micro switches having 1 NO + Provided
Limit switch box 1 NC contacts for sensing end position of the
valve
5.3 Filter Regulator & Of ¼” Size supplied with Gauge Provided
Lubricator
5.4 Gear Box For Manual operation Provided
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

15. 1368-SERIES Data Sheet Ref. No : SU-1368- 00001
Pneumatically Operated Plastic 136850BSPPVCPVCTPROPDA05EP SUDE
Ball Valve Technical POSFBPT PUNE / BANGALORE
Specifications
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED
PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR
2. MAKE SUDE
3 APPLICATION
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
End connection BSP Screwed
Body Material PVC
Ball Material PVC
Seating material Teflon
Flowing medium Acid
Pressure 10 Bar
Temperature Ambient
Characteristic Proportionate
Sude Make Pneumatic DA05 Double Acting Actuator, Signal
Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean
Dry Air
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA05
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered & Clean Dry Air
4.19 Opening and Closing 0.28 [Open] & 0.28 [Close]
Time

16. 5 OPTIONAL ACCESSORIES
5.1 Siemens make Having Input supply: 60 PSI & 4-20mA, Output Provided
Electro Pneumatic supply: 4-20mA, Inbuilt with Position Transmitter
Positioner
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

17. 1368-SERIES Data Sheet Ref. No : SU-1368-00002
SUDE
Pneumatically Operated Plastic MODEL NO.: PUNE / BANGALORE
Ball Valve Technical 136850BSPPVCPVCTONFDA05AF
Specifications RALR2FCVWPLSB
Quotation Ref. No
Quotation Date
1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED
PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR
2. MAKE SUDE
3 APPLICATION
6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE
Valve Size 50mm
End connection BSP Screwed
Body Material PVC
Ball Material PVC
Seating material Teflon
Flowing medium Acid
Pressure 10 Bar
Temperature Ambient
Characteristic On/Off Type
Sude Make Pneumatic DA05 Double Acting Actuator,
Fitted with Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered
and Lubricated
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA05
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered and Lubricated
4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]

18. 5 OPTIONAL ACCESSORIES
5.1 Air Filter Regulator Of ¼” Size supplied with Gauge Provided
5.2 Air Lock Relay Provided
5.3 Flow Control valve 2 nos for Slow opening & Slow closing Provided
5.2 Weather Proof Consisting of 2 nos micro switches having 1 Provided
Limit switch box NO + 1 NC contacts for sensing end position of
the valve
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :