8447779800, Low rate Call girls in Saket Delhi NCR
Control valve
1. 1752-SERIES Data Sheet Ref. No : SU-1752-00001
Electrically Operated Globe Valve MODEL NO.:
1752200200CSS6MTMIBR
SUDE
Technical Specifications PUNE / BANGALORE
LINFL300SD-6000-40003PH
WCP
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Globe Valve Fitted With Sdtork Make 3
Phase Linear Electrical Actuator.
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF 2 WAY GLOBE VALVE
4.1 Line Size 200mm
4.2 Valve Size 200mm
4.3 Port Size 200mm
4.4 End Connection Flanged to ANSI300RF
4.5 Body Material Cast steel confirming to A216GrWCB
4.6 AISI316, Stellited, Cage balanced guide, Carbon filled
Trim Material
lip seal, Metal to Metal seat
4.7
Flowing medium Steam, IBR Construction
4.8 FLOW RATE 14.0 {min} & 22.5 {max} Tonns / Hr
4.9 8.0 Kg/cm2 [g] {normal}
INLET PRESSURE 22.5 Kg/cm2 [g] {max}
4.10
OUTLET PRESSURE 7.5 Kg/cm2 [g]
4.11
PRESSURE DROP 15.40 Kg/cm2 [g]
4.12
INLET TEMPERATURE 219 degree C
4.13 CALCULATED CV 63.70 [normal] & 84.06 [max]
4.14 DESIGN CV 550
4.15 CHARACTERISTIC Linear
4.16 LEAKAGE CLASS IV
4.17 TYPE OF BONNET Standard
4.18 GLAND PACKING Graf oil
4.19 Sdtork make 3 phase Electrical Reversible Linear
FITTED WITH actuator, Supply voltage: 415 volts 3 phase AC.
5.
ACTUATOR DETAILS
5.1 Series 6000
5.2 Model SD-6000-4000
5.3 Out Put motion. Linear
5.4 Rated output Thrust – Kg 4000 KG’S
2. 5.5 Output Speed – mm /Sec 4.0 mm/Sec
5.6 Stroke - mm 100mm
5.7 Time of operations
5.8 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
5.9 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.10 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.11 Local Position Indicator. Provided Continuous type.
5.12 Class of Protection. IP67
5.13 Duty Regulating
5.14 Weight of the actuator. 90 kg’s
5.15 Mounting Dimensions
5.16 Area of Operation Safe
5.17 Wiring Diagram
6 MOTOR DETAILS
6.1 Type. TEFC Induction Motor.
6.2 Supply 415 V AC 50 Hz 3 Phase
6.3 Duty Regulating
6.4 Insulation Class F
6.5 Rating 1 Hp
7 OPTIONAL ACCESSORIES
7.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
7.2 Additional Limit Qty : 2 nos. Provided
Switches Type :
Contact rating: 5 A, 230VAC
7.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
7.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %
7.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
7.6 Interface Card Input signal : 4-20 m A, Provided / Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
7.7 Control Panel / Having Input signal: 415 volts & 4- Provided
Integral Starter 20mA Output signal: 4-20mA
3. 7.8 Local Push Button Refer Basic Specification Sheet Provided
Station
7.9 Space Heater Provided / Not Provided
7.10 Thermostat Provided / Not Provided
8. GENERAL POINTS
8.1 Scope Of Supply Actuator with above accessories
8.2 Inspection By the Customer at our works
8.3 Test Certificates & 2 Sets with Unit
Manuals
8.4 Warranty 18 months from the date of supply or
12 months from the date of installation whichever is earlier.
8.5 Painting RAL 5021
8.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
4. 1752-SERIES Data Sheet Ref. No : SU-1752-00001
Electrically Operated Globe Valve MODEL NO.:
17525040CSS6MTMONF
SUDE
Technical Specifications PUNE / BANGALORE
FL150FINSD-2000-200-1
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Globe Valve Fitted With Sdtork Make
Single phase Linear Electric Actuator
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF 2 WAY GLOBE VALVE
4.1 Line Size 50mm
4.2 Valve Size 50mm
4.3 Port Size 40mm
4.4 End Connection Flanged to ANSI150RF
4.5 Body Material Cast steel confirming to A216GrWCB
4.6 Trim Material AISI316, Stellited, Metal to Metal seating
4.7
Flowing medium Thermic fluid
4.8
INLET PRESSURE 3 Kg/cm2 [g]
4.9
OUTLET PRESSURE 5 Kg/cm2 [g]
4.10
INLET TEMPERATURE 170 degree C
4.11 CHARACTERISTIC On Off type
4.12 LEAKAGE CLASS IV
4.13 TYPE OF BONNET Finned
4.14 GLAND PACKING Graf oil
4.15 Sdtork make Single phase Linear Electric Actuator
FITTED WITH
5.
ACTUATOR DETAILS
5.1 Series 2000
5.2 Model SD-2000-200-1
5.3 Out Put motion. Linear
5.4 Rated output Watts 3.14
5.5 Operating speed – mm /Sec 0.26 mm/sec
5.6 Stroke - mm 40mm
5.7 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
5.8 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
5.9 Torque Limit Switches. Qty : 2 nos., Contacts :
5. Rating: 5A-250 VAC/0.46A-250VDC.
5.10 Local Position Indicator. Provided Continuous type.
5.11 Class of Protection. IP67
5.12 Duty On/Off
5.13 Weight of the actuator. 4.5 Kgs
5.14 Mounting Dimensions
5.15 Area of Operation Safe
5.16 Wiring Diagram
6 MOTOR DETAILS
6.1 Type. Non blocking AC, Synchronous motor
6.2 Supply 230 V AC , 50 Hz
6.3 Duty On / Off
6.4 Insulation Class F
6.5 Rating 1 Hp
7 OPTIONAL ACCESSORIES
7.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
7.2 Additional Limit Qty : 2 nos. Provided
Switches Type :
Contact rating: 5 A, 230VAC
7.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
7.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %
7.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
7.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
7.6 Control Panel / Having Input signal: 415 volts & 4- Not Provided
Integral Starter 20mA Output signal: 4-20mA
7.7 Local Push Button Refer Basic Specification Sheet Not Provided
Station
7.8 Space Heater Not Provided
7.9 Thermostat Not Provided
8. GENERAL POINTS
8.1 Scope Of Supply Actuator with above accessories
8.2 Inspection By the Customer at our works
6. 8.3 Test Certificates & 2 Sets with Unit
Manuals
8.4 Warranty 18 months from the date of supply or
12 months from the date of installation whichever is earlier.
8.5 Painting RAL 5021
8.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
7. 1762-SERIES Data Sheet Ref. No : SU-1762-00001
Pneumatically Operated Globe MODEL NO.:
1762150150CSS6TLIN
SUDE
Valve Technical Specifications PUNE / BANGALORE
FL150PDAEPPOSPT
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Globe Valve Fitted With Pneumatic
Diaphragm Actuator.
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF 2 WAY GLOBE VALVE
4.1 Line Size 150mm
4.2 Valve Size 150mm
4.3 Trim Size 150mm
4.4 Flanged Having 150 Class Rating With Drilling
End Connection
Specification Confirms to IS6392 Table 17
4.5 Body Material Carbon Steel Confirming to A216GrWCB
4.6 Single Seat SS316, Balanced Type, Linear Plug, Soft
Trim Material
seated plug
4.7
Flowing medium Water
4.8 Flow Rate 250 LPM at 14% Lift [min]
5200 LPM at 93% Lift [max]
4.9
Inlet Pressure 6.0 Bar g
4.10
Outlet Pressure 5.5 Bar g
4.11
Pressure Drop 0.5 Bar
4.12 Actuator Sizing 9.0 Bar g
Pressure
4.13
Temperature 40*C
4.14
Design Temperature 80*C
4.15 Calculated CV 14.8 [min], 297 [max]
4.16 Design CV 380
4.17 Sound 70 dBA
4.18 Characteristic Linear
4.19 Leakage Class VI
4.20 Type Of Bonnet Standard
4.21 Gland Packing Graf oil
4.22 Fitted With Pneumatic diaphragm actuator
5 OPTIONAL ACCESSORIES
5.1 Electro Pneumatic Of YTC make having Input Signal: 60 PSI & Provided
Positioner 4-20 mA, Output Signal : 4-20mA.
5.2 Position Transmitter Having Output signal: 4-20mA Provided
8. 5.3 Air Set Of ¼” with Gauge Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from
the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:
9. 1762-SERIES Data Sheet Ref. No : SU-1762-00001
Pneumatically Operated Globe MODEL NO.:
17626565CSS6TONFFL150
SUDE
Valve Technical Specifications PUNE / BANGALORE
PDA1183D3WNCMID062.5B
RS6BNBSP110VACAFR
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Globe Valve Fitted With Pneumatic
Diaphragm Actuator.
2. MAKE SUDE
3 APPLICATION
4 TECHNICAL SPECIFICATION OF 2 WAY GLOBE VALVE
4.1 Line Size 65mm
4.2 Valve Size 65mm
4.3 Trim Size 65mm
4.4 Flanged Having 150 Class Rating With Drilling
End Connection
Specification Confirms to IS6392 Table 17
4.5 Body Material Carbon Steel Confirming to A216GrWCB
4.6 Trim Material Single Seat SS316, Soft Seated Plug
4.7
Flowing medium Water
4.8
Inlet Pressure 3.0 Bar g
4.9
Outlet Pressure 5.5 Bar g
4.10
Temperature 40*C
4.11
Design Temperature 80*C
4.12 Sound 70 dBA
4.13 Characteristic On/Off type
4.14 Leakage Class IV
4.15 Type Of Bonnet Standard
4.16 Gland Packing Graf oil
4.17 Fitted With Pneumatic diaphragm actuator
5 OPTIONAL ACCESSORIES
5.1 3 Way Solenoid valve Of ¼” Size, Brass body, 110 V AC Supply Provided
5.2 Air Set Of ¼” with Gauge Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from
the date of installation whichever is earlier.
6.5 Painting RAL 5021
10. 6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES: