Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
By
Hector Alvarez
Mike Chamberlain

Glass
Learning Objective:
Recognize the various types of glass
products used in buildi...
Glass Products
Low E glass
• Coatings applied to glass panes to
reduce window unit’s heat transfer

Laminated glass
• Used...
Glass Products
Reflective glass
• Adhered reflective metal coatings reduce
heat buildup of tinted glass glazing

Wired gla...
Glass Products
Glass blocks
• Various designs permit light to be diffused,
reduced, or reflected

Bent glass
• Provides de...
Windows, Doors, Entrances,
and Storefronts
Learning Objective:


Know the types of windows, doors,
entrances, and storefr...
Windows
Metal
• Commercial
• Industrial

Aluminum
• Complex designs readily produced
• Resist corrosion and damage from we...
Doors
Special doors
• Aircraft hanger
• Manufacturing

Fire doors
• Assembly of the door and frame
• National standards an...
Entrances, Storefronts
Extruded aluminum members
• Span one or two floors
• Protective coatings can be applied

Tempered g...
Cladding Systems
Cladding is a non-load bearing exterior wall
enclosing a building.

Learning Objective:
 Distinguish

be...
Curtain Wall Cladding
Masonry and stone curtain wall
• Can be prefabricated on the ground and
lifted into place with a cra...
Methods of Installation
Stick curtain wall system
• Completely assembled on site

Unit curtain wall system
• Preassembled ...
Methods of Installation cont.
Unit and mullion curtain wall
• Preassembled curtain wall unit lowered
into place behind the...
Interior finishes refer to:
Wall, ceiling, and floor finishes

Learning Objective:
Understand the integration of
various i...
Interior finish considerations


Interior finish installation is carefully
regulated by building codes.



Interior fini...
Fire considerations


Flame spread rating is a single number that
designates the ability of a material to resist flaming
...
Paint and Coatings


Paint and Coatings are layers of
materials in liquid form applied to
surfaces to decorate, preserve,...
Clear Coatings
Natural resin varnish
• Linseed oil –exterior surfaces
• Tung oil – used where heavy use expected

Syntheti...
Opaque Coatings
Enamel coatings
• They form a gloss or semi gloss film
• Oil based or resin based

Latex coatings
• Contai...
Special Purpose Coatings
Fire retardant coatings
• Retard the spread of surface flame

Stains
• Provide color & weather pr...
Work Cited


Hector I will send this information ASAP
Upcoming SlideShare
Loading in …5
×

Presentation1

  • Be the first to comment

Presentation1

  1. 1. By Hector Alvarez Mike Chamberlain Glass Learning Objective: Recognize the various types of glass products used in building construction.
  2. 2. Glass Products Low E glass • Coatings applied to glass panes to reduce window unit’s heat transfer Laminated glass • Used when glazing is subject to possible breakage or security is required Insulating glass • Two layers of glass with an airtight, dehydrated air space between them
  3. 3. Glass Products Reflective glass • Adhered reflective metal coatings reduce heat buildup of tinted glass glazing Wired glass • Safety glass with mesh of small diameter wires rolled into sheets of molten glass Spandrel glass • Ceramic-coated to clad exterior walls • Eliminates corrosion
  4. 4. Glass Products Glass blocks • Various designs permit light to be diffused, reduced, or reflected Bent glass • Provides designers the opportunity to produce components with dramatic looks Photo-Voltaic glazing • Enables glazing to provide enclosure and lighting, simultaneously generates electricity
  5. 5. Windows, Doors, Entrances, and Storefronts Learning Objective:  Know the types of windows, doors, entrances, and storefronts
  6. 6. Windows Metal • Commercial • Industrial Aluminum • Complex designs readily produced • Resist corrosion and damage from weather Special windows • Skylights • Security
  7. 7. Doors Special doors • Aircraft hanger • Manufacturing Fire doors • Assembly of the door and frame • National standards and building codes Glass • Frameless with metal channels • Wide frame for heavy traffic
  8. 8. Entrances, Storefronts Extruded aluminum members • Span one or two floors • Protective coatings can be applied Tempered glassed doors • One or more doors • Sliding glass panels Variety of requirements • Fire and building codes • Human impact loads
  9. 9. Cladding Systems Cladding is a non-load bearing exterior wall enclosing a building. Learning Objective:  Distinguish between various types of cladding systems
  10. 10. Curtain Wall Cladding Masonry and stone curtain wall • Can be prefabricated on the ground and lifted into place with a crane Modified stucco certain walls • The system is referred to as an exterior insulation and finishing system (EIFS) Metal and glass curtain wall • Metal and glass are widely used because they are lightweight and rapidly erected
  11. 11. Methods of Installation Stick curtain wall system • Completely assembled on site Unit curtain wall system • Preassembled framed curtain wall Panel curtain wall system • Preassembled curtain wall panels
  12. 12. Methods of Installation cont. Unit and mullion curtain wall • Preassembled curtain wall unit lowered into place behind the mullion from above Column cover and spandrel • Column cover, spandrel panel, glazing unit Curtain wall joint sealants • Flow able Sealant Materials • Solid Sealant Materials
  13. 13. Interior finishes refer to: Wall, ceiling, and floor finishes Learning Objective: Understand the integration of various interior finishing processes with other aspects of a buildings construction.
  14. 14. Interior finish considerations  Interior finish installation is carefully regulated by building codes.  Interior finishes hide structural, mechanical, and electrical systems.  Interior finishing begins after a building has been enclosed, protecting the interior from the weather.
  15. 15. Fire considerations  Flame spread rating is a single number that designates the ability of a material to resist flaming combustion over its surface.  Smoke development ratings classify materials by the amount of smoke they give off as they burn.  Fuel contributed rating is a measure of the amount of combustible substances in a given material.
  16. 16. Paint and Coatings  Paint and Coatings are layers of materials in liquid form applied to surfaces to decorate, preserve, protect, and seal them.  Learning Objective: Recognize the range of protective and decorative coatings available.
  17. 17. Clear Coatings Natural resin varnish • Linseed oil –exterior surfaces • Tung oil – used where heavy use expected Synthetic resin varnish • Alkyd resins – water proofing • Polyurethane resin – resist chemicals Lacquer • Requires several coats • Used on interior cabinets, furniture
  18. 18. Opaque Coatings Enamel coatings • They form a gloss or semi gloss film • Oil based or resin based Latex coatings • Contains synthetic resins • Non flammable Oil based coatings • Natural pigments – minerals • Synthetic pigments – coal tar
  19. 19. Special Purpose Coatings Fire retardant coatings • Retard the spread of surface flame Stains • Provide color & weather protection Asphalt coatings • have good moisture resistance
  20. 20. Work Cited  Hector I will send this information ASAP

×