N type connector Catalog

COPYRIGHT © CMPTER ELECTRONICS 2010
Cable Connectors
Receptacles With Solder End
Protective Caps
N CONNECTORS
... A Vital Part of Connection World
CMPTER

Type N 50 Ohm Coaxial Connectors
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, China
Tel : +86-511-8443 6131 Fax : +86-511-8698 8811 Website: www.cmpter.comEmail : sales@cmpter.com
CMPTER
1
DESCRIPTION
CONTENTS
Description ..............................................................................
Technical data ...........................................................................
Interface dimensions ....................................................................
Cable connectors .......................................................................
Receptacles with solder end ............................................................
PCB connectors .........................................................................
Protective cap ...........................................................................
Assembly instruction ....................................................................
Mounting hole ........................................................................... 21
1
2
3
4
15
16
11
14
The development of the Type N connector by the United States Army/Navy ran directly parallel to theesca-
lation of U.S. involvement in WWII. It was finally released in 1942, shortly after the U.S. officially ment field
and join the coaxial cable of the radio frequency extensively entered the war, and since that time it has
been a staple in RF and Microwave applications all over the world.
Due to N type connectors joins by one whorl, it has the characteristic of raliable and strong ant-vibration
nature, machinery and electric performance finely. It is used in vibration and environment abominable
radio equipment of terms and instrument and ground launch system join the coaxial cable of the radion
frequency extensively.

Type N INTERFACE
CMPTER
2
Interface dimensions conformable to the standards:
International: IEC61169-16
Europe: CECC 22210
USA: MIL-STD-348A/304,
IP rating (interface, mated) IP68
LETTER
mm inch
LETTER
mm inch
min. max. min. max. min. max. min. max.
A 0.13 1.03 .005 .13 A 9.05 9.19 .356 .362
B 2.80 3.56 .110 .140 B 4.75 5.25 .187 .207
C 5.33 5.83 .210 .229 C 1.20 1.95 .047 .077
D 1 2 .016 .066 D 4.4 5.1 .173 .201
E 4.54 5.39 .179 .212 E 6.8 9 .268 .354
F 4.05 4.20 .159 .165 F 10.9 11.2 .429 .441
G 10.23 10.43 .403 .411 G DIA 6.98 7.02 .275 .276
H DIA 8.27 8.37 .326 .329 H DIA 8.03 8.13 .316 .320
J DIA 16.1 16.2 .634 .638 J DIA 8.53 8.73 .336 .344
K DIA 20.9 21 .823 .827 K DIA 15.65 15.85 .616 .624
L DIA 3.01 3.05 .118 .120 L DIA 3.01 3.05 .118 .120
M DIA 1.63 1.67 .064 .066
PLUG JACK

TECHNICAL DATA
CMPTER
3
ELECTRICAL DATA
Impedance
Frequency range
Dielectric withsanding voltage
V.S.W.R.
50 Ohm
DC 0 — 11 GHz
2,500 volts rms
straight connectors: 1.3 max 0-11 GHz;
right angle connectors: 1.35 max 0-11 GHz
Insulation resistance
Contact resistance
RF leakage
≥ 5*1000 MΩ
Center Contact 1.0 mΩ
Outer Contact 1.0 mΩ
-90 dB minimum at 3 GHz
MECHANICAL DATA
Center Conductor Cale Affixment
Mating
Assembly Torque (body/clamp nut)
Crimps: hex braid crimp;Clamps:screw-thread nut and braid clamp
Crimp: crimp or solder;All others: solder only
5/8-24 threaded coupling
18/22 lb-ft (25/30 N-m)
Braid/Jacket Cable Affixment
ENVIRONMENTAL
Thermal shock
Moisture resistance
Corrosion
TFE: -65°C to +165°C
MIL-STD-202, method 107, test condition A-1
MIL-STD-202, method 106
MIL-STD-202, method 101, test condition B
Temperature Range
MIL-STD-202, Method 204, Condition DVibration
MATERIAL DATA
Female contact
Gasket
Crimp Ferrule
Brass, silver or gold plated
Phosphorous bronze or beryllium copper, silver or gold plated
Other Metal Parts Brass
Silicone rubber
Copper
Male Contact

CABLE CONNECTORS
Straight cable plugs (male)
CMPTER
50-03-2M06-001
P/N Cable Type
Finish
BodyCenter
Gold Nickel
Assembly Instruction Notes
Semi-rigid .141/RG402 A01
RoHS
50-03-2M11-002
P/N Cable Type
Finish
BodyCenter
Gold Nickel
Semi-rigid .086/RG405 A01
50-03-2M13-003
P/N Cable Type
Finish
BodyCenter
Gold Nickel
Semi-rigid .250 A01
Cable entry soldered
Centre contact soldered
4
20.00[.787DIA.]
3.70[.146DIA.]
4.00 [.157]
5/8-24UNEF-2B
24.00 [.945]
5/8-24UNEF-2B
23.50 [.925]
20.00[.787DIA.]
2.20[.087DIA.]
3.50 [.138]
6.50[.256DIA.]
5/8-24UNEF-2B
20.00[.787DIA.]
23.60 [.929]
SW 19 [.750 HEX.]

CABLE CONNECTORS
CMPTER
50-03-1M04-004
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR100/RG174/RG316 A02
RoHS
50-03-1M18-005
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR195/RG58 A03
50-03-1M01-006
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A03
Cable entry crimp
Cable entry crimp
Cable entry crimp
5
5/8-24UNEF-2B
25.00 [.984]
20.00[.787DIA.]
1.70[.067DIA.]
3.20[.126DIA.]
4.00[.157]
10.00 [.394]
32.50 [1.280]
15.00 [.591]
10.90[.429DIA.]
12.20[.480DIA.]
5/8-24UNEF-2B
20.00[.787DIA.]
7.5[.295DIA.]
5/8-24UNEF-2B
30.30 [1.193]
20.00[.787DIA.]
3.20[.126DIA]
6.25[.246DIA]
12.70 [.500]
5.40[.213DIA.]

CABLE CONNECTORS
CMPTER
50-03-1M10-007
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR240 A03
RoHS
50-03-1M19-008
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR600 A03
50-03-1M20-009
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR300 A03
Cable entry crimp
Cable entry crimp
Cable entry crimp
6
30.00 [1.181]
5/8-24UNEF-2B
20.00[.787DIA.]
4.2[.165DIA.]
6.80[.268DIA.]
8.00[.315DIA.]
13.00 [.512]
46.50 [1.831]
5/8-24UNEF-2B
20.00[.787DIA.]
12.00[.472DIA.]
15.50[.610DIA.]
17.00[.669DAI.]
19.00 [.748]
5.00[.197DIA.]
14.00 [.551]
9.40[.370DIA.]
8.20[.323DIA.]
31.00 [1.220]
5/8-24UNEF-2B
20.00[.787DIA.]

CABLE CONNECTORS
CMPTER
50-03-4M04-010
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR100/RG174/RG316 A04
RoHS
50-03-4M18-011
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR195/RG58 A04
50-03-4M01-012
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A04
Cable entry clamp
Cable entry clamp
Cable entry clamp
7
32.50 [1.280]
5/8-24UNEF-2B
20.00[.787DIA.]
SW 11.00
[.433 AF.]
SW 11.00
[.433 HEX.]
32.50 [1.280]
5/8-24UNEF-2B
20.00[.787DIA.]
SW 11.00
[.433 AF.]
SW 11.00
[.433 HEX.]
38.00 [1.496]
5/8-24UNEF-2B
20.00[.787DIA.]
SW 16.00
[.630 AF.]
SW 16.00
[.630 HEX.]

CABLE CONNECTORS
CMPTER
50-03-4M19-013
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR600 A04
RoHS
50-03-4M25-040
P/N Cable Type
Finish
BodyCenter
Gold Nickel
7/8'' Cable A05
50-03-4M26-039
P/N Cable Type
Finish
BodyCenter
Gold Nickel
1/2'' Cable A06
Cable entry clamp
Cable entry clamp
Cable entry clamp
8
45.50 [1.791]
5/8-24UNEF-2B
20.00[.787DIA.]
22.00[.866DIA.]
SW 20.00
[.787 AF.]
SW 20.00
[.787 AF.]
SW 19.00
[.748 HEX.]
5/8-24UNEF-2B
80.80 [3.181]
40.00[1.575DIA.]
SW 36.00
[1.417 AF.]
SW 36.00
[1.417 AF.]
62.80 [2.472]
5/8-24UNEF-2B
20.00[.787DIA.]
SW 20.00
[.787 AF.]
SW 19.00
[.748 AF.]
22.30[.878DIA.]

CABLE CONNECTORS
Right angle cable plugs (male)
CMPTER
50-13-2M06-016
P/N Cable Type
Finish
BodyCenter
Gold Nickel
RG402/Semi-rigid .141 A07
RoHS
50-13-1M04-017
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR100/RG174/RG316 A08
50-13-1M10-018
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR240 A08
Cable entry crimp
Cable entry crimp
9
5/8-24UNEF-2B
20.00[.787DIA.]
3.70 [.146 DIA.]
9.50[.374]
9.50 [.374]
24.25 [.955]
29.00 [1.142]
3.20[.126DIA.]
4.00[.157DIA.]
10.00 [.394]
28.80 [1.134]
5/8-24UNEF-2B
20.00[.787DIA.]
19.50[.768]
1.65 [.065 DIA.]
4.2 [.165 DIA.]
15.00[.591DIA.]
25.00[.984]
6.80[.268DIA.]
8.00[.315DIA.]
13.00 [.512]
31.50 [1.240]
5/8-24UNEF-2B
20.00[.787DIA.]

CABLE CONNECTORS
Right angle cable plugs (male)
CMPTER
50-13-1M01-019
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A08
RoHS
50-13-4M01-020
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A04
50-13-4M26-041
P/N Cable Type
Finish
BodyCenter
Gold Nickel
1/2'' Cable A06
Cable entry crimp
Cable entry clamp
Cable entry clamp
10
32.00 [1.260]
5/8-24UNEF-2B
20.00[.787DIA.]
7.5 [.295 DIA.] 28.50[1.122]
15.00 [.591]
10.90[.429DIA.]
12.20[.480DIA.]
5/8-24UNEF-2B
20.00 [.787 DIA.]
SW 19.00
[.748 HEX.]
22.30[.878DIA.]
65.75 [2.589]
SW 19.00
[.748 HEX.]
35.40[1.394]
17.50 [.689]
SW 16.00
[.630 AF.]
SW 16.00
[.630 HEX.]
18.00[.709DIA.]
5/8-24UNEF-2B
20.00 [.787 DIA.]
58.20 [2.292]
39.40[1.551]
17.50 [.689]

CABLE CONNECTORS
Straight cable jacks (female)
CMPTER
50-02-1M18-022
P/N Cable Type
Finish
BodyCenter
Gold Nickel
RG58/LMR195 A03
RoHS
50-02-1M01-023
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A03
50-02-1M10-024
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR240 A03
Cable entry crimp
Cable entry crimp
Cable entry crimp
11
5/8-24UNEF-2A
27.80 [1.094]
6.25[.246DIA]
12.70 [.500]
5.40[.213DIA.]
3.20[.126DIA]
15.00 [.591]
10.90[.429DIA.]
12.20[.480DIA.]
7.5[.295DIA.]
5/8-24UNEF-2A
33.30 [1.311]
4.2[.165DIA.]
6.80[.268DIA.]
8.00[.315DIA.]
13.00 [.512]
5/8-24UNEF-2A
29.80 [1.173]

CABLE CONNECTORS
Straight cable jacks (female)
CMPTER
50-02-4M01-025
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A04
RoHS
50-02-4M18-026
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR195/RG58 A04
50-02-4M26-027
P/N Cable Type
Finish
BodyCenter
Gold Nickel
1/2'' Cable A06
Cable entry clamp
Cable entry clamp
Cable entry clamp
12
SW 16.00
[.630 AF.]
5/8-24UNEF-2A
41.40 [1.630]
18.00[.709DIA.]
SW 16.00
[.630 AF.]
5/8-24UNEF-2A
56.80 [2.236]
SW 19.00
[.748 HEX.]
22.30[.878DIA.]
SW 19.00
[.748 HEX.]
5/8-24UNEF-2A
35.50 [1.398]
SW 11.00
[.433 AF.]
SW 11.00
[.433 HEX.]
15.90[.626DIA.]

CABLE CONNECTORS
Straight bulkhead cable jacks (female)
CMPTER
50-02-1D18-028
P/N Cable Type
Finish
BodyCenter
Gold Nickel
Assembly Instruction Mount Hole
RG58/LMR195 A03
RoHS
50-02-1D04-029
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR100/RG174/RG316 A02
50-02-2D06-030
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR240 A09
Cable entry crimp
Cable entry crimp
13
31.20 [1.228]
5/8-24UNEF-2A
19.50 [.768]
22.00[.866]
MAX. 4.50 [MAX. .177]
1.70[.067DIA.]
3.20[.126DIA.]
4.00[.157]
10.00 [.394]
SW 13.50 [.531 AF]
MAX. 7.00 [MAX. .276]
SW 13.50 [.531 AF]
6.25[.246DIA]
12.70 [.500]
5.40[.213DIA.]
35.20 [1.386]
5/8-24UNEF-2A
3.20[.126DIA.]
22.00 [.866]
22.00[.866]
SW 13.50 [.531 AF]
SW 13.50 [.531 AF]
33.20 [1.307]
5/8-24UNEF-2A
22.00 [.866]
22.00[.866]
MAX. 7.00 [MAX. .276]
3.70[.146DIA.]
M01
M01
M01

CABLE CONNECTORS
Straight panel cable jacks(female)
CMPTER
50-02-8F18-031
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR195/RG58 A03
RoHS
50-02-8F01-032
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A03
50-02-8F01-033
P/N Cable Type
Finish
BodyCenter
Gold Nickel
LMR400 A04
Cable entry crimp
Cable entry clamp
Cable entry crimp
14
27.20 [1.071]
5/8-24UNEF-2A
2.00 [.079]
3.20[.126DIA.]
18.70 [.736]
25.40 [1.000 SQ.]
18.25 [.719]
18.25[.719]
4- 3.25 [.128 DIA.]
6.25[.246DIA]
12.70 [.500]
5.40[.213DIA.]
33.00 [1.299]
5/8-24UNEF-2A
2.00 [.079]
18.70 [.736] 25.40 [1.000 SQ.]
18.25 [.719]
18.25[.719]
4- 3.25 [.128 DIA.]
15.00 [.591]
10.90[.429DIA.]
12.20[.480DIA.]
7.5[.295DIA.]
39.10 [1.540]
5/8-24UNEF-2A
2.00 [.079]
18.70 [.736]25.40 [1.000 SQ.]
18.25 [.719]
18.25[.719]
4- 3.25 [.128 DIA.]
SW 16.00
[.630 AF.]
SW 16.00
[.630 HEX.]
4-
6.00
[.236
DIA.]
M02
M02
M02

RECEPTACLES WITH SOLDER END
Receptacles, jacks (female)
CMPTER
50-02-8F7-034
P/N Mount Hole
Finish
BodyCenter
Gold Nickel
Notes
M03
RoHS
50-02-8F7-035
P/N Mount Hole
Finish
BodyCenter
Gold Nickel
Notes
M03
50-02-8F1-036
P/N Mount Hole
Finish
BodyCenter
Gold Nickel
Notes
M02
Panel mounted
Panel mounted
Panel mounted
15
5/8-24UNEF-2A
9.00 [.354]
15.00 [.591] 17.50 [.689 SQ.]
12.70 [.500]
12.70[.500]
4-
3.10 [.122 DIA.]
1.27[.050DIA.]
4.10[.161DIA.]
33.70 [1.327]
1.60 [.063]
17.50 [.689 SQ.]
12.70 [.500]
12.70[.500]
4-
3.10 [.122 DIA.]
1.50 [.059]
5/8-24UNEF-2A
9.50 [.374]
2.00 [.079]
1.27[.050DIA.]
4.10[.161DIA.]
29.80 [1.173]
5/8-24UNEF-2A
2.00 [.079]
27.30 [1.075] 25.40 [1.000 SQ.]
18.25 [.719]
18.25[.719]
4- 3.25 [.128 DIA.]
16.80 [.661]
6.50 [.256]
2.40[.094DIA.]
3.00[.118DIA.]

RECEPTACLES WITH SOLDER END
Receptacles, jacks (female)
CMPTER
50-02-8F2-037
P/N Mount Hole
Finish
BodyCenter
Gold Nickel
Notes
M03
RoHS
50-02-8A1-038
P/N Mount Hole
Finish
BodyCenter
Gold Nickel
Notes
M04
Panel mounted
Panel mounted
16
0.46[.018]
17.50 [.689 SQ.]
12.70 [.500]
12.70[.500]
4-
3.10 [.122 DIA.]
17.00 [.669]
5/8-24UNEF-2A
3.00[.118DIA.]
22.00 [.866]
3.00 [.118]
5/8-24UNEF-2A
2.40[.094DIA.]
3.00[.118DIA.]
MAX. 2.5 [MAX. .098]
16.60 [.653]
29.60 [1.165]
6.00 [.236]
5/8-24UNEF-2A
27.20[1.071]
1.70 [.067 DIA.]
SW 19 [.748 HEX.]

PROTECTIVE CAPS
CMPTER
50-03-9N-042
P/N Finish
Nickel
Notes
RoHS
50-02-9N-043
P/N Notes
Protective cap for jacks (females)
Protective cap for plugs (males)
17
Finish
Nickel
4 [.157 DIA.]
80[3.150]
5/8-24UNEF-2B
19.70 [.776]
20.00[.787DIA.]
20.00[.787]
4 [.157 DIA.]
80[3.150]
5/8-24UNEF-2A
20.50 [.807]

1
ASSEMBLY INSTRUCTIONS
A01
CMPTER
18
50-03-2M06-001
P/N
Stripping Length (mm [in])
a
Notes
5.0 [.197]
50-03-2M11-002
50-03-2M13-003
3.5 [.138]
5.5 [.217]
Cable Type
Semi-rigid .141/RG402
Semi-rigid .086/RG405
Semi-rigid .250
Body
Center Contact
Heatshrink sleeve
(option)
1. Slide the heatshrink sleeve onto the cable (option).
Strip the cable as Striping Dimensions.
2
1
2. Slide the center contact on until it bottom against
the cable dielectric.
Solder the center contact onto the cable.
1
2
3. Slide the cable into the body until it stops.
4. Solder the body onto the cable.
1
5. Slide the heatshrink sleeve over the body and
heatshrink it in place (option).
1
a
Stripping Dimensions

A02
CMPTER
Body
Heatshrink sleeve
(option)
Slide the ferrule onto the cable.
2. Slide the guide pin on until it bottom against the
cable dielectric.
Solder the guide pin onto the cable.
1
2
3. Fan the braid.
4. Slide the cable into the body until stops.
5. Slide the ferrule over the braid.
a
b
c
19
Ferrule
3
1
2
1
13 [.512]
P/N
HEX. Crimp Tool
(mm [in])
ba
3.25 [.128] 3.5 [.138]
c
Cable Type
50-02-1D04-029
LMR100/RG174/RG316
50-03-1M04-004
3 [.118]
Guide Pin
6. Cut the excess of braid if necessary.
Crimp the ferrule with crimping tool (see table).
1
1
2
2 1
Slide the sleeve over the ferrule and heatshrink
it in place (option).

A03
CMPTER
20
a
b
c
Body
Center Contact
Heatshrink sleeve
(option)
Ferrule
Solder the center contact onto the cable.
1
2
3. Fan the braid.
4. Slide the cable into the body until stops.
3
1
2
1
5. Slide the ferrule over the braid.
Crimp the ferrule with crimping tool (see table).
1
1
2
2 1
6. Cut the excess of braid if necessary.
P/N
HEX. Crimp Tool
(mm [in])
ba c
Cable Type
50-03-1M20-009
LMR240
50-02-1M18-022
50-03-1M19-008
50-03-1M10-007
50-03-1M01-006
50-03-1M18-005
LMR195/RG58 5.41 [.213]
6.8 [.268]
10.9 [.429]
3 [.118] 13.5 [.531]
2 [.079]
2.5 [.098]
5 [.118] 18 [.709]
5.5 [.217]
LMR600
LMR300
50-02-1M01-023
LMR400
50-02-1M10-024
15.8 [.625] 6 [.236] 3 [.118] 23 [.906]
4 [.157]
19 [.748]
8.2 [.323]
3 [.118]
50-02-8F01-032 5 [.118]
50-02-8F18-031
50-02-1D18-028

1
2
2
1
A04
CMPTER
21
Body
Nut
Washer
2. Fold the braid back.
Insert the insert sleeve into the cable (under the
braid) until the back surface flush with the cable
dielectric.
4. Slide the nut over the cable assembly.
2
1
1. Slide the nut, the washer, the rubber and another
washer onto the cable.
5. Screw sub-assembly into the body with wrench,
recommended coupling torque see table.
1
a
c
b
Center Contact
Rubber Insert Sleeve
Solder the center contact.
1
6 [.236] 13 [.512] 13 [.512]
P/N
ba c
Cable Type
3 [.118] 6 [.236]
Recommended
Coupling Torque
450N·cm
6 [.236]
5 [.197] 11 [.433] 11 [.433]
50-13-4M01-020
50-03-4M18-011
50-03-4M01-012
50-03-4M04-010
50-03-4M19-013
50-02-8F01-033
50-02-4M01-025
50-02-4M18-026
LMR195/RG58
LMR600
LMR100/RG174/RG316
LMR400

A05
CMPTER
22
Body
Back Nut
O-Ring
P/N Stripping Length (mm [in])Cable Type Recommended
Coupling Torque
800N·cm50-03-4M25-040 7/8'' Cable See Figure
1. Stripping dimensions as shown, Several problems
should be paid attention in stripping:
(a) The end of the outer conductor’s stripping should
be on the wave peak.
(b) The end surface of the dielectric should be
chamfered to 1mmx45°
(c) Removing the burr at the inner conductor’s inside lip
(d) The end of the jacket surface should be chamfered
to 0.5mmx45°.
(e) Removing impurities such as copper scale and burr
at the end of the cable surface.
22mm
0.5mmx45°
1mmx45°
Peak
2. Put the O-ring in the trough of the cable as shown.
O-Ring
Expand Section
Clamp
Outer Conductor
3. Screw off the back nut, assemble the back nut to the
cable and make sure that the clamp is in the trough of
the cable as shown by the following figure, flare the
outer conductor of the cable so as to make sure that the
outer conductor touch slanting surface of the inside hole
at the clamp as shown.
4. Combine the main body and back nut by screwing
as shown.
Keep the back nut and the cable motionless, then
tighten the main body and back nuts with a wrench.

A06
CMPTER
23
Body
Back Nut
O-Ring
1. Stripping dimensions as table, Several problems
should be paid attention in stripping:
(a) The end of the outer conductor’s stripping should
be on the wave peak.
(d) Inner conductor should be chamfered to 1mmx45°.
(e) Removing impurities such as copper scale and burr
at the end of the cable surface.
1mmx45°
Peak
2. Put the O-ring in the trough of the cable as shown.
O-Ring
Expand Section
Clamp
Outer Conductor
3. Screw off the back nut, assemble the back nut to the
cable and make sure that the clamp is in the trough of
the cable as shown by the following figure, flare the
outer conductor of the cable so as to make sure that the
outer conductor touch slanting surface of the inside hole
at the clamp as shown.
4. Combine the main body and back nut by screwing
as shown.
Keep the back nut and the cable motionless, then
tighten the main body and back nuts with a wrench.
P/N
ba c
Cable Type
10 [.394] 18 [.709]
Recommended
Coupling Torque
800N·cm28 [1.102]
50-02-4M26-027
50-03-4M26-039
50-13-4M26-041
1/2'' Cable
Striping Dimensions
ab
(c)

1
A07
CMPTER
24
Back Nut
Heatshrink sleeve
(option)
1
Body
P/N Stripping Length (mm [in])Cable Type Notes
50-13-2M06-016 RG402/Semi-rigid .141 5.5 [.217]
a
2
1
Solder the inner conductor.
1
2
3. Screw the back nut onto the body.
4. Slide the sleeve over the body and heatshrink

A08
CMPTER
Heatshrink sleeve
(option)
3. Push the body under the braid.
Slide the ferrule over the braid.
2. Fan the braid.
4. Crimp the ferrule with crimping tool (see table).
5. Place the cap into the body.
a
b
c
25
Ferrule
3
1
2
1
6. Press on the cap until stops.
Body
Cap
1
1
2
1
Solder the inner conductor.
1
2 1
3.25 [.128]
4 [.157]
3 [.118]
5 [.197]
16 [.630]
23 [.906]
P/N
HEX. Crimp Tool
(mm [in])
ba c
Cable Type
50-13-1M01-019
LMR24050-13-1M10-018
50-13-1M04-017
6.8 [.268]
10.9 [.429]
3 [.118]
20 [.787]
5 [.197]
LMR400
LMR100/RG174/RG316

A09
CMPTER
Heatshrink sleeve
(option)
26
Body
a
P/N Stripping Length (mm [in])Cable Type Notes
50-02-2D06-030 RG402/Semi-rigid .141 4.5 [.177]
2
1
1
3. Solder the body onto the cable.
1
4. Slide the heatshrink sleeve over the body and
heatshrink it in place (option).
1

MOUNTING HOLES
CMPTER
27
16.20 [.638 DIA.]
13.90 [.547]
M01
18.25 [.719]
18.25[.719]
3.50 [.138 DIA.]
16.10 [.634 DIA.]
M02
12.70[0.500]
4.20 [.165 DIA.]
12.70 [0.500]
4- 3.30 [.130 DIA.]
M03
16.10 [.634 DIA.]
14.60 [.575]
M04

Office Adress: #45 ZhongShan East Road,
ZhenJiang, JiangSu China.
Tel:+86 511 8443 6131
Fax:+86 511 8502 5485
Email: sales@cmpter.com
Website: http://www.cmpter.com
Cmpter Electronics, Ltd.

N type connector Catalog

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (6)

Similar to N type connector Catalog

Similar to N type connector Catalog (20)

More from Echo Dong

More from Echo Dong (18)

Recently uploaded

Recently uploaded (20)

N type connector Catalog