Dan Jape Reliable Heating & Air shows you how to install a ceiling fan with these do it yourself tips.

1. How to Install a Ceiling Fan
If you want to upgrade both the look of a room and the performance of your HVAC system,
consider adding a ceiling fan. Replacing an existing fan is actually a job homeowners can pull
off with the right skill set and tools in hand. Safety concerns and time constraints that pop up
along the way may lead you to call in a professional. But if you feel up to the task, here's how to
install a ceiling fan.
1. Preparation and Safety Procedures
To start the job, you need to cut power to the area where you'll be working. Switch off the circuit
to the room in question, then use an electricity meter to make sure the electricity is off. Using a
light switch is unreliable and may leave you exposed to electric shock.
Replacing a fan won't require any structural changes, but upgrading from a light fixture means
you'll have to add support for the weight of a fan. Depending on the area where you live around
Atlanta, you may need a building permit from the municipality.
2. Removing the Fixture
Once the power is definitely off, begin by removing the light or fan that is currently in place.
Take out the screws connecting the fixture to the ceiling. Carefully bring the fixture out of the
ceiling and detach the electrical wires by twisting off the plastic ends connecting them to the
light or fan. Then remove the brackets that held the fixture in place.
At this point, a trained eye will be able to tell whether the electrical box in place is securely
attached to the ceiling joist. Even if you competently replace a ceiling fan, the original setup may
be flawed. Experienced electricians can advise whether it's safe to continue or whether you
should have a new support system installed.
3. Installing New Supports for a Fan
Even if you feel confident you know how to install a ceiling fan, installing new supports to hold
a fan in place requires the use of a drywall saw while you're perched high on a ladder. You'll
have to cut a new hole in your ceiling and set up a brace for the fan. It's often not practical for
homeowners to proceed from this point.
If you want to continue, you'll have to set up the brace box between joists inside your ceiling,
centering it so it's placed in the middle of the hole you've cut. Next, add the assembly and
prepare to connect a mounting plate for the new fan.
4. Assembling and Connecting the Fan
If the work is already done to support the fan's weight, you can skip to this step, where you'll
assemble your new fan according to the manufacturer's instructions and connect it to the
mounting plate below the electrical box. Move the fan's wiring through the downrod and tighten

2. the screws so you can prepare to connect the fan's wiring. By setting the fan's canopy temporarily
in place, you'll have time to wire the fan while it hangs from the ceiling.
Once the wiring is set, push all wires through the hole in the ceiling. At this point, you are ready
to connect the canopy to the mounting plate. All that's left is putting the fan blades in place and
installing light bulbs in the fixture.
Complications often arise when installing a ceiling fan. To avoid the safety risks and hassle
involved, and to boost efficiency and style at home, find a model you like and contact Reliable's
HVAC team.
Image source: morgueFile
[cf]skyword_tracking_tag[/cf]