3. PROJECT PLAN
• A project plan is necessary before
undertaking any project because it serves
as
• your guide in accomplishing an activity. It
will give you an idea what needs to be
done, how
• much to spend and what procedures to
undertake.
4. Project Plan - (Making an extension cord)
Name of Student:__________
Year&Sec:______________
I. Name of Project: Extension Cord
Assembly
Date Started: ________________
Date Finished: _________________
6. GROUP ACTIVITY:Materials Needed:
Qty. Unit Unit Description Cost Total Cost
1 Pc Convenience Outlet
(surface type
duplex)
3 Meters Flat Cord # 18 AWG
1 Pc Male Plug
2 pcs Eyelet Wire
Connectors
TOTAL COST OF MATERIALS
+ cost of
labor
(approxi
mately
20%-30% of cost of materials)
SELLING COST
7. Sample Pictures of Materials Needed
Flat Cord Male Plug Eyelet wire
connectors
Convenience Outlet
8. Tools and Equipment Needed
• 1. Standard/Flat Screw Driver
• 2. Philips Screw Driver
• 3. Long Nose Pliers
• 4. Side Cutting Pliers
• 5. Electrician’s knife/ Pocket knife
• 6. Continuity Tester or Multi-tester
9. Procedure:
• 1. Prepare the plan.
• 2. Gather all necessary materials, tools and equipment
needed.
• 3. Insert cord into the male plug, split the cord wires
about 8 centimeters long.
• 4. Remove insulation of both wires 1 centimeter long
with a pocket knife as if
• sharpening a pencil. Be careful not to cut any strand.
• 5. Scrape bare wire with the back of the knife until shiny.
Twist the wire stands.
• 6. Tie the underwriter’s knot.
10. • 7. Make a loop on terminal wires and connect the
wires to the screw of the male
• plug. The loop should go with the thread clockwise
direction.
• 8. Split the cord wires at the other end about 4
centimeters long, then follow
• procedure no. 4.
• 9. Connect the wires to the connectors.
• 10. Open the convenience outlet then remove the
screw.
• 11. Insert the wire connectors to the screws, tighten
it and return the cover.
• 12. Check the continuity and test the extension
cord.
