2. OBJECTIVE: To be able to properly connect
skinned wires to bulb receptacles,
convenience outlets, switches, or any other
wiring materials.
• TOOLS
• Combination pliers
• Side cutting pliers
• Long nose pliers
• 4. Wire stripper
• 5. Electrician’s knife
• 6. Phillips screw drivers
• 7. Flat screw drivers
5. 1. Make terminal
loops using long
nose pliers from
your skinned wires
of about 1 to 1 ½
inches long.
6. 2. Connect the skinned
wire to screw terminals
of the bulb receptacle.
*Be sure that the wire
loop is to be connected
or attached to the
terminal screw in
clockwise direction.
7. 3. Insert the loop to the
screw and tighten it to
the convenience outlet.
*Be sure that the wire
loop is to be connected
or attached to the
terminal screw in
clockwise direction.
8. 4. Insert the loop to the
screw of the switch and
tighten it.
*Be sure that the wire
loop is to be connected
or attached to the
terminal screw in
clockwise direction.
9. 5. Insert the loop to
the screw of the fuse
terminal and tighten it.
*Be sure that the wire
loop is to be
connected or attached
to the
terminal screw in
clockwise direction.