FIBER-MART based in Hong Kong & U.S., a worldwide leading supplier in a fiber-optic network, FTTx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing & integrated network solutions. Devoting on the research & development, design, manufacture, and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always engaged in high-performance and innovation.
2. W: www.fiber-mart.com T: +86-27-872-080-18 E: sales@fiber-mart.com
1x2 MEMS Optical Switch MPO Fiber Polishing Liquid &
Slurry AO/SO/SC, 500ml
SM-280 Automatic Fiber
Thermal Stripper
2-Port FC Bevel Fiber
Optic Wall Plate Outlet
10x100mm Back to Back
Magnetic Velcro® cable tie
with cable management
100 meters Flame Retardant
PP Wireloom /Convoluted
Tubing PP-AD10-100M-FM
Xfp transceivers Pre terminated Fiber Cables Optic transceivers
3. W: www.fiber-mart.com T: +86-27-872-080-18 E: sales@fiber-mart.com
With some research, you will find that many people think that Ethernet splitters are a means by
which an internet connection can be shared. Depending on the name of the tool the implication
is that a Splitter could split anything Ethernet-related. Unfortunately, some assumptions leave
many consumers wondering that why the Ethernet splitter they just purchased won't do what
they think it will. The PLC splitter is very reliable.
4. W: www.fiber-mart.com T: +86-27-872-080-18 E: sales@fiber-mart.com
For the distribution of the internet between multiple computers this type of network cable
splitter is not constructed. To diminish the amount of Ethernet cable required to connect two
networks an Ethernet splitter is made. In this case, a network refers to the internet, but instead
to two or more computers to LANs (Local Area Networks) that you are trying to join
together. FBT splitter is generally used in sets of at least two. In normal LAN movement, there
are four wires of Ethernet cable, but inside these cables, there are eight wires.
5. W: www.fiber-mart.com T: +86-27-872-080-18 E: sales@fiber-mart.com
There is a need for multiple splitters because the information going through Ethernet cable
requires merging on one side before it enters and separation at the other side where it comes
out. The use of a single splitter allows data to enter the cable; however, there is a disconnection
when it gets to the other end of said cable. As the flow of information is merged, when they
reach the other, receiving end, there is some confusion on the part of the accepting computer.