Ground source heat pumps are an ideal way of reducing energy costs. They usually harness natural heat from the ground by pumping water through them. They function in the same way as a boiler does in a central heating system, but they utilize ambient heat that is generated from the ground as opposed to burning fuel in order to generate heat.
For more information on ground source heat pumps and other HVAC and air conditioning systems, be sure to check out my website at cascademechanical.com.
1. How Ground Source Heat
Pumps Work
Brought to you by: www.cascademechanical.com
2. How Ground Source Heat Pumps Work
Ground source heat pumps are an ideal way of
reducing energy costs. They usually harness natural
heat from the ground by pumping water through
them.
They function in the same way as a boiler does in a
central heating system, but they utilize ambient heat
that is generated from the ground as opposed to
burning fuel in order to generate heat.
3. How Ground Source Heat Pumps Work
These systems are very friendly to the environment
since they use natural heat from the earth which
does not have emissions or toxins.
Even though the ground source heat pumps may be
a bit expensive to install compared to the other
heating and cooling systems, you will save so much
money over the years when using them.
4. How Ground Source Heat Pumps Work
They can last for over fifty years if they are
maintained properly. As a result, you will be able to
get all your money's worth from them before they
break or wear out.
The ground source heat pumps require very little
maintenance. The only concerns you will have when
using them is to make sure the debris is kept away
from them and the compressor, which is the most
expensive part, is properly maintained.
5. How Ground Source Heat Pumps Work
The systems come with a warranty that covers
annual checkups, electric failure, mechanical
malfunctions and annual parts and labor.
During installation of the ground source heat
pumps, a series of pipes are usually drilled down
into the ground in order to create a circuit. After that,
air is pumped through the circuit with the use of a
small electric fan.
6. How Ground Source Heat Pumps Work
The air goes down into the ground where it is
warmed up before coming back up the ground.
These heat pumps are not only used for heating the
home. During summer time, you can also use them
as air conditioners to pump cool air into your house.
During the heating process of the ground source
heat pumps, the compressors are used to compress
refrigerants.
7. How Ground Source Heat Pumps Work
They are powered by electricity. The compression
causes the refrigerant to expand, and then it is
pumped to circulating systems that are located
inside of the building. The basic principle of
operation of these systems is very simple.
A heat exchanger that is buried underground
collects heat from the ground. The heat exchanger
in this case can be a loop of high density polythene.
8. How Ground Source Heat Pumps Work
The loop is very important when it comes to
circulating the heating fluid, which is usually a
mixture of antifreeze and water.
The efficiency of the ground source heat pumps
depend on their design as well as installation. The
size of the building also has an effect on the type of
system that should be installed.
9. How Ground Source Heat Pumps Work
You will need to make sure that the system is not
too small if you have a large home since it may not
be able to heat or cool it efficiently. A system that is
too big may also not be ideal for smaller home since
it may end up causing you to pay high energy bills.
For more information on ground source heat pumps
and other HVAC and air conditioning systems, be
sure to check out my website.
10. How Ground Source Heat
Pumps Work
Brought to you by: www.cascademechanical.com