Agriculture equip

★Seeder
The seeders are suitable for drilling peanut, wheat(rice), corn, millet, sorghum,sesame, etc. They
can fertilize while drilling. They can perform drilling. fertilizing. covering. rolling. etc. during one
operation.

Wheat (rice) Seeder
1. Multi-purpose high efficient compound work, such as tillage, pulverization, stubble-cleaning and
ditching, seeding, mulching, squashing to be finished once time.
2. Easy operation. May adjust rows spacing by changing different driven gears.Can pick out the
whole disc cover when clear the seeds. Their drilling weight. fertilizing weight. drilling depth all
can be adjusted too. And they can carry out high-speed work too. Feed outlet is driven by gear.
There is an anti-reverse mechanism at the inside of driving gear to avoid troubles arising from
machine reverse turning. It can save labors and improve the working efficiency.
3. Wide range of usage. Seed wheat, rice, corn, sorghum, bean, sesame, peanut, cotton and so on
with even spacing. Their power transmitting device are consist of rubber wheel. chain and
sprocket. For adapting different agriculture.
4. Safe, durable design for long term use.

Model 2BFX-12 2BFX-24
Ridging distance (mm) 120-160
Matched power (KW) 25-40 80-120
Depth of fertilizer(mm) 30-70
Sowing depth(mm) 30-60
Linkage three point suspension
Fitted speed (km/h) 5-7
Fitted crop wheat， dry field rice
Operation weight (kg) 400KG 800KG

Office: 12F, Bandao Mansion, No.182-8, Haier Road, Qingdao 266100, China
Tel:+86-532-55683087/8/9 Fax:+86-532-55683077 E-mail: sales@hylen.com.cn www.hylen.com.cn
Page 1 of 19

Corn no-till Fertilizing and Seeder Machine

Model 2BYF-2 2BYF-3 2BYF-4 2BYF-5 2BYF-6
Operating weight(kg) 110 145 190 240 360
Matched power(hp) 12 12-18 15-18 20-25 30-80
Space between rows(mm) 950 500-640 540 500-700
No of Rows 2 3 4 5 6
Fertilization depth (mm) 60-80
Seeding depth(mm) 30-50
Working efficiency(mu/hr) 2.5-3.0 3.0-5.0 5.0-6.0 6.0-8.0 8.0-10.0
Fertilization rate(kg/mu) 75
Corn seeds rate(kg/mu) 1.50-2.35

Page 2 of 19

★Cropper
A cropper is an agricultural machine that can be used to harvest, mow, trim crop. It mainly include
rake, cutrake, lawn mower, reciprocating cropper/mower, grass cutter etc.

9GB series Reciprocating Cropper
1. Wide range of use. it is suitable to be used to reap natural forage grass and plant herbage,
alfalfa, reed, grass feed etc. in level grass land for agricultural, forest and pasturing area, and in
different condition grass land In the sloping field and hills area. The machine is divided into
left-side power output and rear power output according to matched power output modle, and
matched with left-side power output and rear-side power output of tractor separately.
2. Easy operation. it uses the tractors power output shaft to promote the mowers movement of
blade, used the three-points suspension structure to make the machine rise and fall, operate the
power output structure(operate the clutch of tractor)to realize the moving and stopping of blades,
lifting mechanism is divided into two models of cylinder and lifting frame. All works can be done
by a single person i.e. driver of tractor.
3. Durable and good performance. the machine is of good power-driven performance, as the
machine meets obstacle, and blade can be lifted by operating the hydraulic equipment of tractor.
the machine has the features like simple structure easily, strength in cutting ,lower and trim
cutting stubble, reliable operation and so on.

Model 9GB-1.4 9GB-1.8 9GB-2.1
Cutting width(m) 1.4 1.8 2.1
Working speed(km/h) 6-8
Productivity(ha/h) 0.8-1.5
Average cutting height(mm) 60-80
PTO speed(r/mm) 540
Matched power(HP) 18-30
Weight(kg) 125 130 140
Overall Work condition 2400×670×660 2800×670×660 3100×670×660
dimension(mm) Trans. condition 880×670×1650 880×670×2050 880×670×2450

Page 3 of 19

9GBL series Cutrake
9GBL raker and mower and rake makes use of an offset type crank connecting rod mechanism to
drive a knife to carry out the mowing operation when a rake mechanism rakes the hay. The machine
is mainly suitable for the native grass and planted grass mowing and raking operations in the
pasture land in the agricultural and pastoral areas, and mountainous area and hill pasture lands.

Model 9GBL-1.4 9GBL-1.6 9GBL-1.8 9GBL-2.1
Cutting width (M) 1.4 1.6 1.8 2.1
Raking width (M) 1.4 1.6 1.8 2.1
Stubble Height (mm) 50-60
Operation weight (kg) 360 380 400 420
Matched power (hp) 18 20 25 30
Linkage Trailed

Page 4 of 19

★Rake
9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting
operations after mowing. The implement adopts a hydraulic overturning mechanism and spring
steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic
overturning mechanism so as to realize the offloading of the hay.

Model 9GL-1.4 9GL-1.6 9GL-1.8 9GL-2.1
Working width(mm) 1400 1600 1800 2100
Matched power(hp) 20-25 20-25 20-25 20-25
Productivity (ha/h) 15-20 15-20 15-20 15-20
Weight(kg) 95 100 100 105

★Lawn Mower
FT series of lawn-mower is mainly used for harvesting the grass which grows at the farm, golf
course, large lawn recuperation, etc. This machine is compact in structure, advanced in
performance.

Model 4FT 5FT 6FT
Overall dimensions (mm) 2360*1180*1100 2850*1660*1100 3160*1960*1100
Weight (Kg) 170 200 350
Cutting Width (m) 1.0 1.5 1.8
Fitted Power (HP) 18-30 45-60
Cutting Height (mm) 25-100
Linkage Three points semi –mounted

Page 5 of 19

★Rotavator
A rotavator is a machine used in gardens and allotments to churn up and dig over the ground
without laborious manual work with spades or forks.
It adopts middle gear transmission system, which mounted with the tractor of 12-130hp .tractor’s
wheel tracks are completely covered after tillage as the working width is much wider. the quality is
reliable and the performance is well. so it can be used on dry and paddy field. it can reduce the time,
labor and cost, etc.

Model 1GN-100 1GN-120 1GN-140 1GN-160 1GN-180 1GN-200 1GN-250
Overall Dimensions 800*1250*830 800*1550*830 80*165*830 80*180*830 900*2000*950 900*2200*950 1050*2770*1150
(L*W*H) (mm)
Working width (mm) 1000 1200 1400 1600 1800 2000 2500
Operation weight
185 190 205 255 380 420 450
(Kg)
Matched power (HP) 18-25 18-25 25-30 30-40 50-55 50-65 80-100
Linkage Three Point mounted

★Plow
A plough or plow is a tool used in farming for initial cultivation of soil in preparation for sowing seed
or planting, including moldboard plow, chisel plow and disc plow. The primary purpose of ploughing
is to turn over the upper layer of the soil, bringing fresh nutrients to the surface, while burying weeds
and the remains of previous crops, allowing them to break down. It also aerates the soil, and allows
it to hold moisture better. In modern use, a ploughed field is typically left to dry out, and is then
harrowed before planting.

Page 6 of 19

Hydraulic Swivel Plough
1. Durable and long term use. The plowshare is made of special wear-resistant steel.
2. Wide range of usage. The compact-structured plough is easy for soil breaking, soil raising and
soil turning in the plain or sloped farm.
3. Good performance. After working, the land surface is flat. The soil clods are well crushed and
turned over. The furrows are small and without crests.

Working Working Mode of 2 furrow 3furrow 4 furrow 5 furrow 6 furrow
width per depth turn over
plough(mm) (mm)
300 180-250 mechanical Model 1LJF230/ 1LJF330/90
/width(mm) 60
Matched 30-50 24-30
power(HP)
250 160-240 Hydraulic Model 1LYF425 1LYF525 1LYF625/
/width(mm) /100 /125 150
Matched 40-50 60-70 80-90
power(HP)
270 160-250 Hydraulic Model 1LYF427 1LYF527
/width(mm) /108 /135
Matched 55-65 80-90
power(HP)
350 160-280 Hydraulic Model 1LYF335/1 1LYF435 1LYF535
/width(mm) 05 /140 /175
Matched 65-90 75-90 100-120
power(HP)

Page 7 of 19

Furrow plough
1. Easy operation. simple in structure and light in weight.
2. Good performance. After working, the land surface is plain and the furrow is narrow.The soils
are well crushed. The outer layer of soil and organic compound on the surface are covered
deeply under the earth. So as to be quickly decomposed to fertilize the soil.
3. Suitable for sandy loam, loam, clay soil on the cultivated farm with the soil resistance less than
1.20kgs/cm2 and paddy field without water.
4. Welded cross shaft frame support makes this equipment more stable and anti-aging.

Model 1L-430 1L-435 1L-535 1L-220 1L-320 1L-420 1L-325 1L-425 1L-525
Matched power(hp) 55-70 70-100 80-120 12-15 25-30 30 35 50 65
Operation Weight(kg) 360 370 470 80 115 145 228 330 435
No of Plough 4 4 5 2 3 4 3 4 5
Working width(m) 1.2 1.4 1.75 0.4 0.6 0.8 0.75 1.0 1.25
Working depth(mm) 160-280 200-250
Linkage Three point suspension

Model 1L-427 1L-527 1L-627 1L-727
Matched power(HP) 40-60 60-70 70-80 75-80
Productivity (mu/h) 6-8 8-10 10-12 12-14
No. of plow 4 5 6 7
Working width(mm) 1080 1350 1620 1890
Working depth(mm) 160-250
linkage three-point mounted

Page 8 of 19

★Disc Harrow
A disc harrow is a farm implement that is used to cultivate the soil where crops are to be planted. It
is also used to chop up unwanted weeds or crop remainders. It consists of many iron or steel discs
which have slight concavity and are arranged into two or four sections. When viewed from above,
the four sections would appear to form an "X" which has been flattened to be wider than it is tall.
The discs are also offset so that they are not parallel with the overall direction of the implement. This
is so they slice the ground they cut over a little bit to optimize the result. The concavity of the discs
as well as their being offset causes them to loosen and pick up the soil they cut.

Light Duty harrow
1. The 1BQX series Light-duty Disc Harrow are suitable for pulverized and loosening clods after
ploughing and for planning the land before sowing on cultivated land. The machines can make
soil and fertilizer mix up, and clear away the stump of plants on light or medium soil and
preparing seed bed for planting.
2. The series Light-duty Disc Harrow frame are made of qualified steel tube, Their structures are
simple and reasonable, strong and durable, convenient to operate, easy to maintain and
efficient in pulverizing and penetrating into the soil and leaves the land with a smooth, even tilth.
All these satisfy the agricultural requirements of intensive cultivation.
3. The 1BQX series suspension Light-duty Disc Harrow’s front and rear gangs are all assembled
with scalloped disc, could be used with from 12HP to 80HP type tractors.

Model 1BQX-1.1 1BQX-1.3 1BQX-1.5 1BQX-1.7 1BQX-2.0 1BQX-2.2 1BQX-2.3
Working width(mm) 1100 1300 1500 1700 2000 2200 2300
Working depth(mm) 100-140
No. of disc 12 14 16 18 20 22 24
Dia. Of disc
460 / 18”
(mm/inch)
Weight (kg) 200 220 250 270 300 400 420
Linkage Three point mounted
Matched power (hp) 12-18 15-18 20-25 25-30 35-40 40-45 55

Page 9 of 19

Offset Mid-duty Harrow
The machine is suitable for pulverizing and loosening clods after plowing and for planning the land
before sowing on cultivated land, it can make soil and fertilizer mix up, and clean away the stump of
plants. With the reasonable structure, the machine is durable in service, easy to be operated and
maintained, the land surface is smooth.

Model 1BJX-1.7 1BJX-2.0 1BJX-2.2 1BJX-2.4 1BJX-2.5 1BJX-2.8
Working width (mm) 1700 2000 2200 2400 2500 2800
Working depth (mm) 140
No. of disc 16 18 20 22 24 26
Dia. Of disc (mm) 560
Weight (kg) 400 434 463 620 760 800
Linkage Three point mounted
Matched power (hp) 45 50-55 55-60 65-70 75 80

Hydraulic Offet Light-duty Harrow
The series mounted light-duty disc harrows are suitable for pulverized loosening colds after
ploughing and for planning the land before sowing on cultivated land.The machines can mix up soil
and fertilizer and clear away the stump of plants on light soil and prepair seed bed for planting.

Page 10 of 19

Model 1BQ-3.3 1BQ-3.4
Working width (mm) 3300 3400
Working depth (mm) 100-140
No. of disc 40 42
Dia. of disc (mm/inch) 460 / 18"
Weight (kg) 1000 1050
Linkage Trailed
Matched power (Hp) 80-100

Hydraulic Double Folding-wing Offset Mid-duty Harrow

Feature:
 Suitable for crushing the heavy clay soil after tillage.
 Wide range of working, narrow transportation, wing-folding easily, compact construction, high
productivity, convenient operation and easily maintenance.

Model 1BJ-4.4 1BJ-5.3 1BJ-6.0
Working width (mm) 4400 5300 6000
working depth (mm) 140
No. of disc 40 48 56
Operation weight (kg) 1750 2200 2520
Matched power (Hp) 75-100 100-120
Productivity (Ha/hr) 2.7 3.3 3.5

Page 11 of 19

Semi-hanging Offset Heavy-duty Harrow
It is suitable for stubbing before plowing and crushing soil after plowing in the waste land and heavy
soil. The harrow can also replace a plow to carry out the first operation in the long-cultivated land.
The harrow performs well in surface leveling, soil crushing and stubbing after plowing. The harrow
has the advantages of easy hanging, convenient adjustment, flexible turning, good road passing
performance, etc.

Model 1BZ(BX)-1.8 1BZ(BX)-2.0 1BZ(BX)-2.5 1BZ(BX)-3.0
Working width (mm) 1800 2000 2500 3000
No. of disc 18 20 24 28
Operation Weight (kg) 840 1050 1200 1350
Linkage Semi—mounted
Matched Power (hp) 70-90 100-120

Hydraulic Pair-setting Heavy Harrow
It is applicable for breaking up the clods and loosening of wasteland, shrub swamp, heavy soil, can
rake the land instead of plough. With wide coverage, reasonable structure, strong ability to rake;
easy to use and maintain etc.

Page 12 of 19

Model 1BZD-2.5 1BZD-2.8 1BZD-3.1 1BZD-3.7 1BZD-4.1 1BZD-4.7
Operation weight (kg) 1800 2000 2700 2800 2980 3360
No. of disc 22 26 28 32 36 42
Dia Of disc (mm) 660
Working width (mm) 2500 2800 3100 3700 4100 4700
Working depth (mm) 180-220
Matched power (hp) 100-120 120 120-150

Semi-hanging Offset Heavy Harrow
Having absorbed all advantages from such machines of foreigners and Chinese, this harrow is
designed according to the standard as the assembled structure, the main frame is welded with
rectangular tubes, on which assembled with hydraulic lifting transportation wheels, spring
adjustable device and special used bearing assemblies. Therefore this machine is strong and
durable for operation with the reasonable structure, convenient for transportation; turning radius is
small, easy to be adjusted and maintained, etc.

Model 1BZ-2.0 1BZ-2.2 1BZ-2.5 1BZ-3.0 1BZ-3.4
Working width (mm) 2000 2200 2500 3000 3400
No. of disc 18 20 24 28 32
Operation weight (Kg) 1150 1250 1350 1500 1650
Linkage Trailed
Matched power (hp) 75-80 80-100 90-100 100-120

Page 13 of 19

★Reaper
A reaper is a machine that reaps (cuts and gathers) crops at harvest, when they are ripe.
This machine should be matched with walking tractor for working, which has small size with light
weight. It is very easy and convenient to operate, low stubble, which won’t be limited by rows
spacing and ridges spacing, widely used for harvesting in small, middle, large plot fields, especially
working in paddy field.

Model 4GL-130 4GL-140 4GL-160
Matched power (Hp/Kw) 12-25/8.8-18.4 18-30/13.2-22
Cutting width(m) 1.3 1.4 1.6
Weight(kg) 90 155 160
Cutting height(cm) 6-10
Productivity(ha/h) 0.21-0.32 0.37-0.5 0.37-0.5

★Ridger
It is used for making ridges for planting tobacco, potato and other vegetables. The ridger fully
adjustable for giving different accurate row widths. To obtain the correct ridge profile and retain soil
flow, the high grade mould boards are adjustable. The ridger can also be used for earthing up the
crops sown in rows.
1. Good ability of adaption. Easy and convenient adjustment in ridging spacing,ridging height,
ridging rows and angle.
2. wide range of matched tractors.
3. Easy operation and movement with small size
4. precision manufacturing.
5. break stubble and ridge with one stop

Page 14 of 19

3QL series Ridger
Model 3QL-3 3QL-4 3QL-5
Working width (mm) 2500 3200 3900
Ridging space (mm) 700-900 700-900 700-900
Ridging height (mm) 200-250 200-250 200-250
Matched power (Hp) 40 60 80

1ZX series Adjustable Ridger
Model 1ZXQ-2 1ZX-2
Overall dimensions (mm) 2000*1170*700 2700*1170*710
No. of Ridger 2 2
Ridger height (mm) ≥300
No of Disc 4
Dia of Disc (mm) 560 660
Linkage Type 1 .three-point mounted
Matched power(HP) 35-40 75-80
Productivity (ha/h) 0.7-1.0 0.7-1.0

3Z series Adjustable Ridger

Model 3Z-80 3Z-120 3Z-180 3Z-260
Overall Dimension (mm) 1200*1000*1000 1200*1500*1000 1200*2050*1300 1200*270*1300
Working width (mm) 800 1200 1800 2600
Width of Ridge (mm) 200-450 200-450 200-450 300-500
Height of Ridge (mm) 150-240 150-240 150-300 150-300
Weight (kg) 150 160 200 280
Matched Power (hp) 15-20 25-30 55-70 60-90

Page 15 of 19

★Planter
A Planter is a farm implement towed behind a tractor, used for sowing crops through a field. Our
planter can be used to plant all kinds of yams.

CRD Spreader
It is mainly used for spreading fertilizer in the field before cultivation and seeding after cultivation or
applying fertilizer during seeding. This machine has compact structure, good performance, wide
range of application, high working efficiency and the ability to equally seed and fertilize and so on.

Model CRD-600 CRD-400
Overall Length (mm) 1150 1150
Dimensions Width (mm) 1100 1150
Height (mm) 1450 1200
Weight (kg) 70 65
Working Width (M) 16-30 16-30
Matched Power (Hp/Kw) 18-25/13.2-18.4

Yam Planter:
◆easy to operate. ◆the latest design. ◆types and colors optional. ◆stable working

2CM-1（single 2CM-2A（double
Model 2CM-2 (double row)
row） tidge/four row）
Operation weight(KG) 200 180 350
Row span (mm) 500---850 --------- 500---1000
Planting distance (mm) 280---350 180-350 180---350
Productivity (km/h) 0.4---0.6 ---------- 0.6--1
Seed tank capacity (m3) 0.24*2 0.24*1 0.24*2
ManureTank capacity (m3) 0.08*1 0.08*1 0.08*2
Matched power (HP) 20--35 20--35 50--90

Page 16 of 19

★Yam Harvester
This series harvester is mainly driven by tractors with 22-80hp, which is suitable for potatoes, sweet
potatoes, garlic and other root crops. The principle is excavating the crops with soil and separating
by the vibration screen.
4U Series Potato Harvester is mainly used for harvesting potato, garlic, sweet potato, peanut and
other crops under the ground with the advantages of simple structure, high efficiency, lower
breakage, running fast without trembling, and no blocking by the grasses.

Model 4U--1 4U—1A 4U—1B 4UZ-1 4U—2 4U—2B 4U--3
No. of Rows Single Single Single Single Double Double Double
Matched Bunched Bunched Double
Function Scattering Scattering Scattering
hand tractor Dumping Dumping self-loading
Space of rows
550--800 500-65 550--800 550--800 550--800 550--800 550--800
(mm)
Productivity
0.2—0.35 0.35—0.55 0.55—1.0
(ha/h)
Total weight
195 100 210 160 600 700 1200
(kg)
Matched power
22--35 8—15 22--35 22--35 50--80 50--80 70--120
(HP)
Working depth
250 200 250 250 250 250 250
(mm)
working width
650 560 650 650 1650 1650 1650
(mm)
Appearing rate ≥96%
Break skin rate ≤2%
PTO speed
560/1250 1000 560/1250 560/1250 560 560 560
(RPM）
Overall dim
2400*900*900 900*700*700 2400*900*900 1200*1000*750 2800*2200*1000 2800*2200*1000 3300*3900*3100
(mm)

Page 17 of 19

★Self-power Thresher
A threshing machine is a machine for the separation of grain from stalks and husks. We sell
threshers with rated power from 7.5-13 Kw, and productivity from 800-1500 Kg/h.
This machine used for threshing corn cob and other rod-shaped grain. It has the compact structure,
beautiful shape, high frequency and reliable operation.
It can be connected with many kinds of tractors. Even if there is no tractor, it can be connected with
various types of motors both one-phase and three-phase.

Model 5TD-75 5TD-100 5TD-125 5TD-135
Rotary drum’s speed (rpm) 1200 1150 1050 1000
Power of motor (kw) 7.5 7.5-11 11 11～13
Model of motor Y132M-4 Y160M-4
Vibrating speed (HZ) 5.25 3.89
Swing span (mm) 20 40
Productivity (Kg/h) 800-1000 800-1200 1000-1400 1100-1500
Total loss rate ≤1.5%
Broken rate ≤1.5%
Impurity rate ≤2%
Unit productivity (kg/kWh) ≥130

Page 18 of 19

★Earth auger

Model 1WX-230 1WX-300 1WX-400 1WX-500 1WX-600 1WX-700 1WX-800 1WX-1000
2400×800× 2450×1000×
Overall dimension (mm) 2300×800×1650 2350×800×1650
1650 1650
Dia. (mm) 230 300 400 500 600 700 800 1000
Working depth (mm) 400-700 500-800 500-1000
Matched power (kw) 14.7-29.4 22-53 36.7-55
Operation weight (kg) 150 165 230 240 251 260 270 300
PTO speed (rpm) 540 2.18：1(when PTO speed is 540rpms),
Gearbox ratio 2.92：1 3:1(when PTO speed is 720 or 760rpms).
Linkage Three point suspension
Productivity (caves/h) 60-150 60-120 30-60
Transport clearance ＞300mm

Page 19 of 19

Agriculture equip

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (10)

Similar to Agriculture equip

Similar to Agriculture equip (20)

Recently uploaded

Recently uploaded (20)

Agriculture equip