2. According to the U.S. Department of Energy, 50% to 70% of the
energy used in homes is for heating or cooling activities. Whether you
reside in Bakersfield, Bangor or California, your home will be more
comfortable and energy-efficient with the right type of insulation.
Usage of branded insulation materials for proper insulation can
create a more comfortable and consistent indoor climate while
significantly improving your home's energy efficiency.
3. Drafty older homes get great benefits from added insulation. Bringing
home's insulation to a standard level is not always possible, particularly
if the home has undersized rafters or other limiting features.
Homeowners can also add blown-in insulation to the enclosed stud
spaces in an empty attic during any point of time. But to get the best R-
value, plan to add to or replace, existing insulation in the remodel areas
where the wall framing stays exposed. However, there is no single best
insulation for all situations, some are better than others, depending
upon the part of the house you are remodeling.
4. Attic Batts
If the roof is framed with rafters with attic space virtually open,
you can add insulation batts between the horizontal joists. If an
attic has finished floor, you can add insulation either above or
between the sloped rafters. If you plan to insulate a living area
in the attic, use Owens Corning paperfaced insulation in every
rafter space, with the paper facing down. The thicker the batts,
the higher is the R-value. When the depth of a rafter space is
not enough to hold thick batts, go for high-density batts to
increase the depth more.
5. Insulating the walls
If you wish to replace the wallboard during the remodel, the best
way is to remove all wet, old or substandard insulation and
install new fiberglass batts. Another efficient alternative is to
hire a professional spray-foam insulation tech who will apply the
expandable foam in open stud spaces and seal the cavities. Spray
foam insulation is not a DIY project and costs high than batt
insulation, offering the highest R-value.
6. Rigid Foam Insulation
If you want to insulate your home
without furring the rafters, one option
to do so is installing R-Max rigid foam
insulation board over the rafters. They
come in large, lightweight panels and
when installed with seam tape and
foam-safe adhesive, seals the boards to
form a vapor barrier. You can install
drywall on top of the boards for a
finished attic.
7. Blown-in Attic Insulation:
When heat rises, most of the house's warmth escapes through the
ceiling. Adding the best type of insulation depends on the roof
framing system and future plans for the attic. If your roof trusses
have small upper and lower chords with smaller wood members
present in triangular patterns between, blown-in cellulose fiber
works well. No matter, what type of insulation you add, it must not
cover heat-producing light units or block soffit vents.
8. Home insulation is a barrier that resists the flow of heat. The better
the heat flow resistance, the more the homeowner can save on
heating and cooling costs and feel comfortable all year round. So,
buy insulation materials online and avoid use of much energy to
keep your home warm in the winter and cool in the summer.