These are the following five tips provided by Marc Brattin that will you in understanding some of the creatively processing drum loops tips. So, how to come up with something unique and fantabulous. For more :- http://marcbrattin.com/

1. Creative Tips On Working With Drum Loops By Marc Brattin

2. Rock Music - Tips for Creatively Processing Drum Loops
When you have started for practicing drum, you must have done on some basic loop which was
already discovered long before. But as soon as you become an expert you have a desire to come up
with your own unique sound tract.
So, how to come up with something unique and fantabulous. Seriously you need not have to worry
as Marc Brattin has come with tips for creatively processing drum loops

3. Here given below are five tips for Processing Drum Loops:
• Make one shot for easy arranging
• Process it and make it your own
• Treat your loop for ambiance
• Extend to distort
• Leave the sample exactly the way it is

4. Make One Shot For Easy Arranging
Hacking is an awesome approach to make
your specimen more flexible. In this
illustration slashed up a basic drum break
into a couple of one-shots. There are many
approaches to cleave a drum circle in your
DAW.
Like essentially highlighting the piece of the
waveform you like and duplicating the clasp
to another sound track. After you have
somebody shots selected like a catch, kick
and greetings cap. You can make and
completely new example of your own.

5. Process It And Make It Your Own
How about we prepare the poop out of this
circle and pound it up like a pop can.
Experimentation is the way to finding your
mark sound.
Utilize a basic contortion module to add some
additional earth to the low end of a 12 band
circle from our unique drum break. Despite
the fact that you didn't play the drums on the
recording make them your own through
innovative preparing.

6. Treat Your Loop For Ambiance
According to Marc Brattin pitching gives your
specimen much more profundity. On the off
chance that you need to make a pleasant
layered feel in the back of your track, extend a
one-shot and put some postponement and
reverb on it.
It will give you a few sounds to make a surface
with. You don't need to utilize a spotless one-
shot either. Pitching the space between 2 hits,
or extending the tails on a drum hit can have
cool outcomes as well.

7. Extend To Distort
Extending or twisting a specimen is a standout
amongst the most widely recognized approaches
to fit a drum break to your track. In the event
that you download or record an example and the
planning isn't fitting consummately with
whatever is left of your track, no stresses.
Yet in the event that you extend excessively your
circle will begin to twist. Unless that is the
impact you're searching for. Here’s a bit of the
first circle that is extended past its confinements.
It gives you a radical new solid to work with.

8. Leave The Sample Exactly The Way It Is
Because you're utilizing an example doesn't
mean it can't be up front. At times a specimen
works best as your lead. Regardless of whether
its vocals, synth or drums, let your examples be
your guide from step one.
Some of the time you hear a specimen and the
various parts simply become alright. So go with
the flow. In this case, I’ve given the drum a
chance to circle remain out front in the blend
and after that constructed a few sections around
it. Counting a bass cushion and some synthy
cuts.