CÔNG TY ANH EM, NHA KHOA, MORITA DENTAL, ĐIỀU TRỊ LASER ghế răng, nội nha, trị tủy mài cùi, thẩm mỹ, phục hình, implant nha khoa,

1. A.R.C. Laser GmbH
Bessemerstraße 14
90411 Nürnberg
Germany
 +49 911 21779-0
 +49 911 217 7999
info@arclaser.de
www.arclaser.de
2
1
11-2013
1
1)To modify the settings (Power/Pulse-on/ Pulse-off) of your
pre-installed program, just click into the specific field. A bar
will appear and you easily can modify the value via touchscreen.
Use the Plus/Minus buttons for fine adjustment
You may exit the screen with the save button.
2) Push the indication field and a selection field will
open: either Energy in Joule, average Power per
second or frequency in Hz. The activated icon will be
automatically transferred on the main menu.
3)Press “Settings-Icon“ to
enter the submenu.
Press the Flash Drive icon to
see its content. (The Flash-
Drive has to be inserted)
Next screen - last screen
HOME
Screen brightness
Brightness aiming beam
Frequency aiming beam
Ready button brightness
Volume
Tone
4)FLash Drive
Here you will find valu-
able information concerning
the FOX.
First steps
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 4 LASER PRODUCT
P=12 Watt, 810-1064 nm
P< 2 mW, 532 nm
6)Charging the battery: Insert the sower supply into its socket
at the rear side of the FOX.
Switch on the device, enter your password, choose a surgeon and
a program. Make sure to select a program - otherwise the charging
process will not be started!
The charging process is initiated when the orange LED lights up. If
you switch off your FOX the charging process will continue.
As soon as the battery is completely charged the orange LED will
switch off. The green LED stays active.
5)Dust Cover: Protect your
device with the dust cover
when your laser is not in use.
Settings
Content flash drive
Kurzanleitung_Nov2013.indd 2 21.11.2013 15:16:14
11.06.18
2018_06_FOX3_Kurzanleitung_en_alleine.indd 1 11.06.2018 16:50:25

2. 4321
4
2
1)Rear Panel: Following sockets are
available at the backside of the Fox. Af-
ter unpacking the Door Interlock connector
(2) must be inserted.
Power supply
Door Interlock
AUX 1 / AUX 2
Foot switch
6)Foot switch (cable version):
Plug the foot switch into the
adequate socket (4)
When using a slit lamp the remote safety
filter at socket No. 2 should be plugged in.
To use the foot switch you have to unfold
(push and open the protection).
CAUTION LASER DIODE: Never open the housing! Keep the device from untrained persons. There are no serviceable parts inside the
device. Maintenance and service operations can only be performed by authorized persons or A.R.C.-trained dealers.
FOX - QuickGuide
2)Switch on: To start the FOX, unlock the
Laser-Stop button.
Press the both arrow-buttons until the green
LED’s activate. The laser starts. It will take
some seconds cause the laser will check
some security circuits.
4)Preselect from the list of surgeon na-
mes. Click OK and choose one of the
available applications. Click OK and you
will be guided to the Main Screen.
5)Insert the fiber as displayed.
If perfectly inserted, you should
hear a “click”
7)Start the laser: Push the black
button, to switch to READY-
Mode.
The aiming beam is activated.
8)Switch off: By means of folding
the foot panel you can switch off
the laser. To protect your touch screen
you can fold the foot plate completely.
The Red Laser-Stop button should
not be used to switch off the laser in
your every days routine.
WARNING!
Always keep in mind,
that you are using a laser
device! Wear protective
glasses!
Enter Password
3)Enter Password: Please use the pass-
word you received from our local dis-
tributor.
Surgeon
A.R.C. Laser GmbH
Pressing the foot switch will
activate the laser. Every laser
exposure is accompanied by an
acoustic signal and the red LED
at the fiber port will come on ev-
ery exposure.
Application
Application 01
Application 02
Kurzanleitung_Nov2013.indd 1 21.11.2013 15:16:14
4321
4
Power supply
Door Interlock
AUX 1 / AUX 2
Foot switch
)Foot switch (cable version):
Plug the foot switch into the
quate socket (4)
n using a slit lamp the remote safety
at socket No. 2 should be plugged in.
se the foot switch you have to unfold
h and open the protection).
e device from untrained persons. There are no serviceable parts inside the
rformed by authorized persons or A.R.C.-trained dealers.
)Preselect from the list of surgeon na-
mes. Click OK and choose one of the
able applications. Click OK and you
be guided to the Main Screen.
)Switch off: By means of folding
the foot panel you can switch off
aser. To protect your touch screen
can fold the foot plate completely.
Red Laser-Stop button should
be used to switch off the laser in
every days routine.
WARNING!
Always keep in mind,
that you are using a laser
device! Wear protective
glasses!
Surgeon
A.R.C. Laser GmbH
Application
Application 01
Application 02
21.11.2013 15:16:142018_06_FOX3_Kurzanleitung_en_alleine.indd 2 11.06.2018 16:50:26