GPEH QUICK REFERENCE FOR XEUS PRO ANALYSIS

1 GPEH:                                The QUICK REFERENCE GUIDE for XEUS PRO

INTELLIGENT
OPTIMIZATION

[GPEH:
QUICK REFERENCE GUIDE FOR
XEUS PRO]
This guide is aimed at first time users or experienced users requiring a quick reference on how to set‐up
and use GPEH for Xeus Pro.

Rev 11


Contents
INTRODUCTION ............................................................................................................................................. 3
LIMITING THE GPEH DATA COLLECTION ....................................................................................................... 3
SUPPORTED FORMAT AND LOG FILE DATA .................................................................................................. 5
GEOANALYSIS OVERVIEW AND PREREQUISITES ........................................................................................... 6
IMPORT GPEH/UETR/CTR LOG FILES ............................................................................................................ 6
START GPEH ANALYSIS ................................................................................................................................ 10
Issue Analysis .......................................................................................................................................... 10
GeoAnalysis ............................................................................................................................................. 13
GPEH Plotting ...................................................................................................................................... 13
Plotting Cell Coverage ......................................................................................................................... 14
Viewing GPEH Estimated Call Location ............................................................................................... 15
Neighbor Analysis ................................................................................................................................... 16
Coverage Analysis ................................................................................................................................... 18
VIP Analysis ............................................................................................................................................. 19
Pilot Pollution .......................................................................................................................................... 18
GPEH Search ............................................................................................................................................ 18
Search by Call ...................................................................................................................................... 19
Search by Event ................................................................................................................................... 20
Search by Message ............................................................................................................................. 20
.
GPEH Views ............................................................................................................................................. 21
Messages View .................................................................................................................................... 21
Measurement View ............................................................................................................................. 21
Cell Utilization View ............................................................................................................................ 22
Cell Coverage View ............................................................................................................................. 22
.
Appendix 1: ERICSSON GPEH RECORDING .................................................................................................. 23
Collecting Bulk CM .................................................................................................................................. 23
Configure the GPEH collection parameter at the RNC............................................................................ 26
Initiate GPEH collection .......................................................................................................................... 27
Appendix 2: RECORDING SCENARIOS ......................................................................................................... 37

Rev 11


INTRODUCTION
GPEH is a Performance Recording function which consists of two types of recording, User Equipment
Traffic Recording (UETR) and Cell Traffic Recording (CTR) that supports Ericsson network. Xeus helps you
to analyze calls, events, cells or phone models using GPEH data. It currently supports only Ericsson
WCDMA network. Refer to Appendix 1 for Ericsson GPEH Recording Steps.

LIMITING THE GPEH DATA COLLECTION
Depending on the analysis type to be performed in Xeus, user can limit the GPEH Event type to be
collected in GPEH in order to reduce RNC processor load for recording. RNC has a parameter
gpehDataLevel that determines the level of information to record for the external protocol such as RRC
and RANAP.

The default setting of the parameter is 0 = 'HEADER_DATA_ONLY', which records only the external
protocol message name and direction of the message. In order to record the encoded ASN.1 data of the
external message, the OSS administrator can set the parameter to 1 = ‘ALL DATA’. This will allow detail
analysis of the external protocol message. However, this is only recommended for small recording set of
cells to avoid overloading the RNC processor or the GPEH data file limit. Refer to Appendix 1 for steps on
how to configure the GPEH collection parameter at the RNC.

Following are the features in Xeus which requires gpehDataLevel set to 1 = ‘ALL DATA’:

• IMEI info for Phone Profiling
• Message detail for external protocol
• NAS Messages in the RRC Direct Transfer messages
• Active Set Measurement which include monitored set from RRC Measurement Report
• Call Setup Analysis drill down of Blocked Call Analysis
• Call Type categorization from the RRC Connection Request
• Call Drop categorization from RANAP IU RELEASE and RRC Connection Release messages

Following table provides the list of GPEH Events used by Xeus:

GPEH Event Type In Xeus
INTERNAL_ADMISSION_CONTROL_RESPONSE Identify Admission Control

INTERNAL_CALL_SETUP_FAIL Identify Call Setup Failure
INTERNAL_CHANNEL_SWITCHING Identify Channel Switching
INTERNAL_CMODE_ACTIVATE Identify Compressed Mode Activation
INTERNAL_CMODE_DEACTIVATE Identify Compressed Mode Deactivation
INTERNAL_CNHHO_EXECUTION_ACTIVE Identify Core Network Hard Handover
INTERNAL_FAILED_HSDSCH_CELL_CHANGE Identify failed HS‐DSCH cell change

Rev 11


INTERNAL_FAILED_TRANSITION_TO_DCH Identify Failed transition to DCH in HS mode
INTERNAL_HSDSCH_CELL_SELECTION_NO_CELL_SELECTED Identify HS cell selection involving no new cell
INTERNAL_IFHO_EXECUTION_ACTIVE Identify inter‐frequency handovers
INTERNAL_IMSI Identify the UE IMSI
INTERNAL_IRAT_HO_CC_EVALUATION Identify IRAT handover decision
INTERNAL_IRAT_HO_CC_EXECUTION Identify IRAT handovers
INTERNAL_MEASUREMENT_HANDLING_EXECUTION Identify Compressed Mode type
INTERNAL_OUT_HARD_HANDOVER_FAILURE Identify failed hard handovers

INTERNAL_OUT_HAND_HANDOVER_SUCCESS Identify successful hard handovers

INTERNAL_PACKET_DEDICATED_THROUGHPUT Capture RLC and application throughput for PS
Interactive data
INTERNAL_PACKET_DEDICATED_THROUGHPUT_STREAMING Capture RLC and application throughput for PS
streaming data
INTERNAL_PS_RELEASE_DUE_TO_CNHHO Identify Packet Switched RAB release due to a
Core Network Hard Handover
INTERNAL_RAB_ESTABLISHMENT Identify RAB establishments
INTERNAL_RAB_RELEASE Identify RAB releases
INTERNAL_RADIO_QUALITY_MEASUREMENTS_UEH Capture UL SIR Errors and DL TX Code Power
information
INTERNAL_SOFT_HANDOVER_EXECUTION Identify Soft Handovers
INTERNAL_SOHO_DS_MISSING_NEIGHBOUR Identify missing neighbors
INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR Identify unmonitored neighbors
INTERNAL_SUCCESSFUL_HSDSCH_CELL_CHANGE Identify HS‐DSCH cell change
INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_NEW_ACTIVE Identify HS‐DSCH cell selection with new cell
_SET selected after hard handover
INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_OLD_ACTIVE_ Identify HS‐DSCH cell selection that selects a
SET new cell in the old active set
INTERNAL_SUCCESSFUL_TRANSITION_TO_DCH Identify  successful transition to DCH in HS
mode
INTERNAL_SYSTEM_BLOCK Identify blocked call
INTERNAL_SYSTEM_RELEASE Identify dropped call
INTERNAL_SYSTEM_UTILIZATION   Capture Resource Usage
INTERNAL_UE_POSITIONING_QOS Capture UE Position from Location Services
RANAP_IU_RELEASE_COMMAND Identify  UMTS to GSM relocation
RANAP_IU_RELEASE_REQUEST Identify call release or dropped call
RANAP_RELOCATION_COMMAND Identify direct retry to GSM
RANAP_RELOCATION_PREPARATION_FAILURE Identify IRAT relocation preparation failure
RRC_CELL_CHANGE_ORDER_FROM_UTRAN Identify IRAT Cell Change Order
RRC_CELL_CHANGE_ORDER_FROM_UTRAN_FAILURE Identify  IRAT Cell Change failure
RRC_CONNECTION_REJECT Identify RRC Coonection Reject

Rev 11


RRC_CONNECTION_RELEASE Identify RRC connection release
RRC_CONNECTION_REQUEST Identify Call Attempt
RRC_DOWNLINK_DIRECT_TRANSFER Capture NAS messages
RRC_HANDOVER_FROM_UTRAN_COMMAND Identify Successful relocation preparation for
IRAT handover
RRC_HANDOVER_FROM_UTRAN_FAILURE Identify Failed relocation preparation for IRAT
handover
RRC_INITIAL_DIRECT_TRANSFER Capture NAS messages
RRC_MEASUREMENT_CONTROL Capture GSM Neighbor Information
RRC_MEASUREMENT_REPORT Capture neighbor Ec/No and RSCP
RRC_UPLINK_DIRECT_TRANSFER Capture NAS messages
NBAP_CELL_SETUP_REQUEST Identify propagation delay for GeoAnalysis
Table 1

Refer to the Appendix 2 for recording scenarios.

SUPPORTED FORMAT AND LOG FILE DATA
Xeus supports GPEH/UETR/CTR log file formats such as .bin and .bin.gz. They are usually grouped in sets
and each set contains a reference file. The reference file contains links to other files in the set. It is
mandatory to import the reference file for the set. The reference file usually contains ‘0’ as part of its
name. Refer to the picture below as a guide:

Each set of log file data should contain the messages in Table 1 above.

Rev 11


GEOANALYSIS OVERVIEW AND PREREQUISITES
GeoAnalysis is a new feature on Xeus which enables you to estimate a location using non‐GPS based
Network Measurement Recordings.  Xeus uses GeoAnalysis to perform Geo‐locate using a combination
of OTDDA multi lateration and relative signal strength. Analysis on GeoAnalysis is done through plots
and reporting. Using GeoAnalysis, geo‐located events and measurements can be plotted and areas
where significant pilot overlaps identified.

Before performing GeoAnalysis, ensure that you have the supported network data that meets the
following prerequisites:

1. The network data imported must be either Ericsson Bulk CM or Ericsson Kget log file. The imported
Network data must contain the RNC and Cell that matches with the data recorded in GPEH.

Note: For best analysis or Geo‐locate through GeoAnalysis, it is recommended for you to
import the network data that takes at least an hour to parse.

2. The GPEH recording must contain RRC Measurement Report and NBAP Radio Link Setup Request
messages.
3. Ensure that ‘Perform position estimation for Abnormal Released Calls/All Calls’ is enabled at
‘Import Ericsson GPEH/UETR/CTR log’ wizard.

IMPORT GPEH/UETR/CTR LOG FILES
You need to ensure that you have the following data before you import GPEH/UETR/CTR data:

1. Network data (preferably Ericsson Bulk CM).
1.1. Network Data accepted for GeoAnalysis (Ericsson Bulk CM or Ericsson Kget log file only)
2. log file format
3. log file set(s) contain mandatory messages

GPEH/UETR/CTR data is best analyzed when you have Ericsson Bulk CM. It will provide complete analysis
for neighbor optimization. If you are performing GeoAnalysis, ensure that the network data selected is
Ericsson Bulk CM or Ericsson Kget log file. You can refer to Xeus Pro Quick Guide for further information
on importing network data.

Rev 11


Now, follow these steps to start importing Ericsson GPEH/UETR/CTR log files:

1. Go to File > Import and Export > Import Ericsson GPEH logs.

2. Select ‘Add Files’ and select the files which includes file ‘0’. If you have placed the files in a
folder, just select ‘Add Folder’
3. Browse and select files.

Rev 11


4. Click ‘Next’ button to continue.

Rev 11


5. At General tab, set the ‘Time Offset’ according to your time zone.
6. If you are performing GeoAnalysis, ensure that you tick on “Enable GeoAnalysis”.  Note: Ensure
that the loaded network file contains RRC Measurement Report and NBAP Radio Link Setup
Request messages.
7. Click the "Filter" tab to set the filter options. Select a Filter Template and click "Settings" button
to set to the "Messages Filter" and the "Call End Filter". Click "OK" button to save the changes
made at GPEH filter and for you to reload the same settings later.
8. Select the Settings tab to edit thresholds.
9. Click ‘Next’ and wait for the parsing to complete.
If parsing is successful, you are ready to analyze GPEH/UETR/CTR data.

Rev 11


START GPEH ANALYSIS
GPEH database loads automatically together with its summary at the Project Explorer after parsing.
Loading the database will also automatically load the Start Page.

Start Page

GPEH Database

GPEH database Summary

Start page contains summary of Call Type and Call End Type in percentage, issues found and suggested
actions for your issues.

Issue Analysis
Xeus allows you to analyze issues from Start Page. To analyze:

1. Select ‘Cells with more than 3% dropped calls’ at the Issues section
2. View the affected cell(s) at the graph on your right. Mouse over on the graph to view the total
dropped calls and percentage for each cell

Rev 11


3. Click on ‘Analyze further with Dropped Call Analysis’ link at the Suggested Actions area. You will
be directed to Dropped Call Analysis page

4. At the Dropped Call Analysis page, right click on a slice at the chart and click on ‘List All Dropped
Calls’ at the context menu
5. You can view all dropped calls at the workbench. Refer to the image below.

Rev 11


6. Click on the ‘Load GPEH Views’ at your workbench. You can view events & messages and
measurements for each drop call here. Refer to the previous image above.
7. Locate this drop call event on the map by selecting the drop call and checking at the checkbox
on your workbench. Refer to the previous image.
8. Click on the ‘Actions’ button on your workbench and select ‘Display route on Map’.

9. Use your map and Google Earth to view event and route.

Rev 11


GeoAnalysis
GeoAnalysis is an estimation of the calls or events based on a geographical location. This feature enables
users to generate various plotting scenarios based on the estimated geographical location for the GPEH
calls. Users can also analyze GPEH abnormal event with the dimension of the estimated location. Xeus
uses several propagation delay and mobile triangular calculation to perform location estimation.

GPEH Plotting
Ensure that the Plot tab is selected.

To create plots, first select the type of plot to display.  Click on the Load Plot button to load
the plot. To remove a plot, click on the Remove Plot from Map button or select another
plot type and load the new plot. For details on the other tools in the toolbar, please refer to the
Xeus Help file.

Rev 11


Note:  You can also use the Clear Show Layers button on the Network toolbar to clear all
plots on the map.

Plotting Cell Coverage
Ensure that the Cell Cov. tab is selected.

To plot individual cell coverage the cell from the Select CellId drop‐down box and the Coverage
type to view. Click on the Load button to load the individual cell plot.

Rev 11


Viewing GPEH Estimated Call Location
Select Actions > Displays UE Position on Map to view the connection line between the serving cells on
the map.

You will be able to view the estimated UE Position of the call on the map. You can see the Start Distance
and End Distance for a call on Workbench.

Rev 11


Neighbor Analysis
You can also conduct Neighbor Analysis using GPEH data. Types of Neighbor Analysis which could be
done are:

• Neighbor Optimization
• Pilot Pollution.

Neighbor Optimization
Neighbor Optimization ranks the top neighbors for the cell and also suggests action to be done to the
neighbor. To optimize neighbor for a cell:

1. Go to Neighbor Optimization page from Start Page at the GPEH address bar. Refer to the picture
below:

2. At this page, select the Ranking method: Merit Point and set the multiplier to decide the
ranking.

See the formula below on how the Merit Point is calculated:

Merit Point (MP) = [ (Attempt for Position 1)*P1 +  (Attempt for Position 2)*P2 + (Attempt for
Position 3)*P3 + (Attempt for Position 4)*P4]  x  [  (Missing Neighbor with
Release)*M1 + (Missing Neighbor without action)*M2] / (Total Attempt)

Rev 11


3. Enter Minimum Event Count, Maximum number of Neighbors and Minimum Neighbor Ec/No.

4. Tick “Exclude Missing Neigh No Action events” if you do not wish to include the “Missing Neigh
No Action Multiplier (M2)” calculation into the missing neighbors analysis formula.
5. Click on the Analyze button.
6. List of cells and neighbors ranked according to priority, based on merit points and category will
be displayed at the workbench

7. Right click on the workbench to export the results to Excel sheet
8. Step through the neighbors to view cell location at the map or Google Earth.
9. To follow proposed action, select the neighbor (s),  click on the Apply button at the workbench
menu
10. You will see the action gets recorded in Action History located at Network Views

Rev 11


To view the updated relation for the cell, click on the Analyze button at the Neighbor Optimization page
again.

Pilot Pollution
Pilot Pollution enables you to find polluter cells so that you can remove them to optimize network. To
find polluter cells for each cell:

1. Go to GPEH Start Page > Pilot Pollution at the address bar

2. Pilot pollution analysis will be displayed in chart
3. Click Load Details to view list of polluted cells. Click on the + to expand and view the polluter
cells for each polluted cell. The screen below shows polluted cell has been expanded

4. Step through the pollution list to view cell location at the map or Google Earth.

Coverage Analysis
You can identify the cells with the highest percentage of over coverage calls. To perform coverage
analysis, do the following:

1. Go to GPEH Start Page > Coverage Analysis at the address bar.
2. You will see the Top 10 Cell Coverage Analysis chart displayed here.
3. Click 'Load Details' button.
4. View the results at the Workbench.
5. Click a cell at the Workbench and the distribution of call percentage for the call setup distance
will appear on the map.

Rev 11


VIP Analysis

You can to search for a particular IMSI from the database and view the Statistics and call information.
VIP Analysis also allows users to bookmark an IMSI for future analysis. To bookmark an IMSI, do the
following:
1. Go to GPEH Start Page > VIP Analysis at the address bar.
2. Type in the IMSI and click on "Add Bookmark" button. The Bookmark IMSI dialogbox will appear
on the screen.
3. Type the name for the IMSI and click on "Add to Bookmark" button.
4. Once you have completed, click "Close" button.
5. You can view the newly added IMSI at the Bookmarked VIP drop‐down list.

GPEH Search
This tool helps you to search calls or events. It is located at the Toolbox.

Note: If the search result exceeds the limit (50, 000), Xeus will displays the first
50,000 records at the Workbench. You can view the complete search results by

exporting it in text file (.txt) format.

Search by Call
You can search by call using the steps below:

1. Select Toolbox tab on your left panel
2. Select GPEH Search menu and click on Search By Call

3. Select Call Start Cell
4. Click on Clear button as ‘ALL’ is selected as default
5. Select a cell from the Call Start Cell and hit the Search button
6. Your result will display on the workbench at the Call Summary tab
7. Step through the workbench to locate the call. If there is no position info for the selected call, an
alert will appear at the workbench.

Rev 11


Search by Event
You can also search by event.

To search by event:

1. Select Toolbox tab on your left panel
2. Select GPEH Search menu and click on Search By Event
3. Click on Clear button as ‘ALL’ is selected as default
4. Select an event from the Event Type and hit the Search button
5. Your result will display on the workbench at the Event Summary tab
6. Step through the workbench to locate the event.
7. The event will be automatically displayed at the map or GE when you step through
8. To view the route, click on the checkbox beside the event at the workbench. Then, click the
Actions button and click to display route on map.

Search by Message
You can also search by Message.

To search by message:

1. Select Toolbox tab on your left panel.
2. Select GPEH Search menu and click on Search By Message.
3. Select the Type, Message and click on Search button.
4. Your result will display on the workbench at the Message Summary tab.
5. Step through the workbench to locate the message.
6. The event will be automatically displayed at the map or GE when you step through.
7. To view the route, click on the checkbox beside the message at the workbench. Then, click the
Actions button and click to display route on map.

Rev 11


GPEH Views
GPEH Views are used when analyzing GPEH data.  You can access GPEH views by selecting View > GPEH
Views from the menu bar or select Load GPEH Views from the Workbench.

The three types of different views available in GPEH are:‐

• GPEH Messages View

• GPEH Measurement View

• GPEH Cell Utilization View

• GPEH Cell Coverage View

Messages View
Messages View displays Events and Messages for the Calls selected at the workbench.

To view the Events & Messages for the Call:
1. Right click on the charts at Start Page to list down the calls at the workbench.(You could also use
this view when you use the Search Tool at the Toolbox)
2. Select the 'Load GPEH Views' button at the workbench. You could also go to View >GPEH Views.
3. Step through on the workbench to view Event & Messages for different calls
4. You can also see the position of the Event at the Map and GE when you step through at the
workbench
5. At this view, click on an event to display the corresponding message.
6. Double click or right click to view details of the event or message
7. Highlighted to select all details at the Message Details using short‐cut or context menu to copy
the details.

Measurement View
Measurement View displays Active Set/Neighbors information. You can analyze EcNo and RSCP against
time using the Measurement Chart and Data. Refer to the Help file for more information on the
Measurement Chart.

To view Measurements for the Call:

1. Right click on the charts at Start Page to list down the calls at the Call/Event Summary at the
workbench. (You could also use this view when you use the Search Tool at the Toolbox)
2. Select the Load GPEH Views button at the workbench. You could also go to View > GPEH Views.
3. Step through at the workbench to view location for different calls.
4. At the view, see the corresponding measurements of EcNo, RSCP, SIR Error and Tx Code Power
at the chart. (Click & Drag to zoom in the chart)
5. You could also see the UARFCNDI, SC, EcNo and RSCP values together with SIR Error
and TX Code Power values for the call below the chart.

Rev 11


Cell Utilization View
Cell Utilization View displays the cell utilization for a specific cell based on the selected time.

To view cell utilization for the call:

1. Select Views > GPEH Views> GPEH Cell Utilization to access GPEH Cell Utilization page.
2. Select the required Cell.
3. Tick on the checkbox of required cell utilization element.
4. Click on the required time on the graph to view the cell utilization value for that selected time.
(Click & Drag to zoom in the chart)

Cell Coverage View
Cell Coverage Analysis displays the total number of calls, average of EcNo and Rscp for call setup or call
end scenarios in different type of distance.

To analyze Cell Coverage, do the following:

1. Select the Cell.
2. Select Analysis Type.
3. Select Sliced By.
4. Click the Update button to view the result. The chart will display the Total Call Setup for
different range of EcNo and RSCP. Refer to the legend on the below the chart. (Click & Drag to
zoom in the chart)

Rev 11


Appendix 1: ERICSSON GPEH RECORDING
Collecting Bulk CM
1. Start OSS Common Explorer.

2. OSS Common Explorer will appear on the screen as shown in the figure below. At Topology Tab,
select the Root node from the network tree. Then, right click and select ‘Export..’ option from
the context menu.

Rev 11


3. After clicking on ‘Export..’ option, Bulk CM Export dialogbox will appear as shown in the figure
below.  Tick to select Radio Network only as a filter details option and click Export button.

4. Click on Bulk CM Progress tab to view on the export progress.

Rev 11


5. FTP to the OSS and set the export to /var/opt/ericsson/nms_umts_wran_bcg/files/export.

Rev 11


Configure the GPEH collection parameter at the RNC
1. Start OSS Common Explorer.

2. Select the required RNC Node to perform GPEH recording.

3. Change the ‘gpehDataLevel’ parameter value according to the value in your recording scenario.
The recommend value for all data is 1. Please refer to Appendix 2: Recording Scenario for
further information.

4. Increase the value for ‘gpehFileSize’ parameter to 50,000 (50,000 kB).

Rev 11


Initiate GPEH collection

1. Select Performance > Initiate data Collection > WCDMA/LTE RAN Measurements to start the
WCDMA/LTE RAN Measurement tool.

2. Select Administration >Add profile… to add a new profile.

3. Add GPEH subscription profile wizard will appear on the screen as shown in the figure below.
Select the required recording type. (GPEH, CTR or UETR) Click Next button to proceed to the

Rev 11


next step.

Rev 11


4. Type in the Profile name and click Next button to proceed to the next step.

Rev 11


5. Select RNC network elements should be observed and click Next button to proceed to the next
step.

Rev 11


6. Select the required RNC you would like to collect and click Next button to proceed to the next
step.

Rev 11


7. Select the required Utran Cells for recording and click Next button to proceed to the next step.

Rev 11


8. Select the events for the GPEH recording and click Next button to proceed to the next step.

Rev 11


9. Select the UE Fraction (Percentage of mobile that will be recorded) and click Next button to
proceed to the next step.

Rev 11


10. Select the schedule for the subscription profile.

Rev 11


11. Monitor the progress at Profile display tab > General performance even handling profiles.

12. Once complete, the collected GPEH files will be located in
“/var/opt/ericsson/nms_umts_pms_seg/segment1/GPEH/” folder.

Rev 11


Appendix 2: RECORDING SCENARIOS
Following table shows the different analysis scenarios in Xeus and the recommended data collection configuration.

Analysis Type Recommended GPEH Event to be collected Cell Set Recording Setting
Problem Cells detail GPEH Internal Event Problem cells only. Not gpehDataLevel = 1
analysis such as • INTERNAL_ADMISSION_CONTROL_RESPONSE   more than 10% of total (ALL DATA)
troubleshooting of • INTERNAL_CALL_SETUP_FAIL   RNC limit
dropped call, blocked call • INTERNAL_CHANNEL_SWITCHING   Ue_Fraction = 500
and Throughput. User • INTERNAL_CMODE_ACTIVATE
needs to analyze call • INTERNAL_CMODE_DEACTIVATE
messages with message • INTERNAL_CNHHO_EXECUTION_ACTIVE
details. • INTERNAL_FAILED_HSDSCH_CELL_CHANGE
• INTERNAL_FAILED_TRANSITION_TO_DCH
• INTERNAL_HSDSCH_CELL_SELECTION_NO_CELL_SELECTED
• INTERNAL_IFHO_EXECUTION_ACTIVE
• INTERNAL_IMSI
• INTERNAL_IRAT_HO_CC_EVALUATION
• INTERNAL_IRAT_HO_CC_EXECUTION
• INTERNAL_MEASUREMENT_HANDLING_EXECUTION
• INTERNAL_PACKET_DEDICATED_ THROUGHPUT
• INTERNAL_RAB_ESTABLISHMENT
• INTERNAL_RAB_RELEASE
• INTERNAL_RADIO_QUALITY_MEASUREMENTS_UEH
• INTERNAL_SOFT_HANDOVER_EXECUTION
• INTERNAL_SOHO_DS_MISSING_NEIGHBOUR
• INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR
• INTERNAL_SUCCESSFUL_HSDSCH_CELL_CHANGE
• INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_NEW_ACTIVE_SET
• INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_OLD_ACTIVE_SET
• INTERNAL_SUCCESSFUL_TRANSITION_TO_DCH
• INTERNAL_SYSTEM_BLOCK
• INTERNAL_SYSTEM_RELEASE
• INTERNAL_SYSTEM_UTILIZATION
• INTERNAL_OUT_HARD_HANDOVER_FAILURE
• INTERNAL_OUT_HARD_HANDOVER_SUCCESS

Rev 11


RRC Event
• RRC_CELL_CHANGE_ORDER_FROM_UTRAN
• RRC_CELL_CHANGE_ORDER_FROM_UTRAN_FAILURE
• RRC_CONNECTION_REJECT
• RRC_CONNECTION_RELEASE
• RRC_CONNECTION_REQUEST
• RRC_DOWNLINK_DIRECT_TRANSFER
• RRC_HANDOVER_FROM_UTRAN_COMMAND
• RRC_HANDOVER_FROM_UTRAN_FAILURE
• RRC_INITIAL_DIRECT_TRANSFER
• RRC_MEASUREMENT_CONTROL
• RRC_MEASUREMENT_REPORT
• RRC_UPLINK_DIRECT_TRANSFER
RANAP Event
• RANAP_IU_RELEASE_COMMAND
• RANAP_IU_RELEASE_REQUEST
• RANAP_RELOCATION_COMMAND
• RANAP_RELOCATION_PREPARATION_FAILURE
NBAP Event
• NBAP_RADIO_LINK_SETUP_REQUEST
Cell Analysis, Scatter and GPEH Internal Event Whole RNC gpehDataLevel = 0
Distribution Plot   • INTERNAL_CHANNEL_SWITCHING   (HEADER ONLY)*
• INTERNAL_CNHHO_EXECUTION_ACTIVE
• INTERNAL_FAILED_HSDSCH_CELL_CHANGE   Ue_Fraction = 500
• INTERNAL_HSDSCH_CELL_SELECTION_NO_CELL_SELECTED   *The plot will be
• INTERNAL_IFHO_EXECUTION_ACTIVE   limited to the Active
• INTERNAL_IRAT_HO_CC_EVALUATION   Set from the internal
• INTERNAL_IRAT_HO_CC_EXECUTION   message. Monitored
• INTERNAL_MEASUREMENT_HANDLING_EXECUTION   Set measurement will
not be available
• INTERNAL_PACKET_DEDICATED_THROUGHPUT
• INTERNAL_RAB_RELEASE

Rev 11


• INTERNAL_SUCCESSFUL_HSDSCH_CELL_CHANGE
• INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_NEW_ACTIVE_SET
• INTERNAL_SUCCESSFUL_HSDSCH_CELL_SELECTION_OLD_ACTIVE_SET
• INTERNAL_SUCCESSFUL_TRANSITION_TO_DCH
• INTERNAL_SYSTEM_UTILIZATION
NBAP Event
Neighbor Optimization GPEH Internal Event Whole RNC gpehDataLevel = 0
including missing neighbor • INTERNAL_SOFT_HANDOVER_EXECUTION   (HEADER ONLY)
and Pilot Pollution Analysis • INTERNAL_SOHO_DS_MISSING_NEIGHBOUR
• INTERNAL_SOHO_DS_UNMONITORED_NEIGHBOUR   Ue_Fraction = 800
RRC Event
NBAP Event
Phone Profiling GPEH Internal Event Whole RNC gpehDataLevel = 1
• INTERNAL_ADMISSION_CONTROL_RESPONSE   (ALL DATA)
• INTERNAL_CALL_SETUP_FAIL
• INTERNAL_CNHHO_EXECUTION_ACTIVE   Ue_Fraction = 500
• INTERNAL_FAILED_HSDSCH_CELL_CHANGE
• INTERNAL_IFHO_EXECUTION_ACTIVE
• INTERNAL_IRAT_HO_CC_EXECUTION
• INTERNAL_MEASUREMENT_HANDLING_EXECUTION

Rev 11


RRC Event
• RRC_DOWNLINK_DIRECT_TRANSFER
• RRC_INITIAL_DIRECT_TRANSFER (Mandatory)
• RRC_UPLINK_DIRECT_TRANSFER (Mandatory)
RANAP Event
• RANAP_IU_RELEASE_COMMAND
• RANAP_IU_RELEASE_REQUEST
NBAP Event
Appendix: Table 1

Rev 11

GPEH QUICK REFERENCE FOR XEUS PRO ANALYSIS

Recommended

Recommended

More Related Content

Similar to GPEH QUICK REFERENCE FOR XEUS PRO ANALYSIS

Similar to GPEH QUICK REFERENCE FOR XEUS PRO ANALYSIS (7)

Recently uploaded

Recently uploaded (20)

GPEH QUICK REFERENCE FOR XEUS PRO ANALYSIS