We’re the manufacturer in China, our company is major in power inverter and generator products, the design center is in Taiwan and factory located in China, we have a warehouse in the USA, EU, AU, are supplying inverter in a worldwide market.
W: www.powerjackpowerinverter.com T: +86.59568232699 E: firstname.lastname@example.org
8000W Low Frequency Split Phase
Pure Sine Wave Solar Power Inverter
DC 24V TO AC 220V & 110V 60Hz
4000W continous power for AC 110V or 4000W continous power for AC 220V
This is our 2019 newest version split phase power inverter, we upgard the design on the new
type inverter. The differences between 10.0version and 8.0 version are as follow:
A. We add cooling holes on each side.(as photos show)
B. The cooling holes is facing the transformer, that makes the transformer has a good
C. We also add cooling holes on the bottom, which helps to cool down the inverter more
D. Compared the old version, the cooling fan of the 10.0 version is changed from
2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
2. The caption on the boards is changed from stickers to carving, which cannot fall off,
also is more beautiful.
1. Hz Selection (50Hz, 60Hz, automatic selection)
Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the
button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful.
2. DC alarm voltage adjustment (±0.5V)
Adjust counterclockwise to reduce DC alarm voltage
Adjust clockwise to raise DC alarm voltage
3. AC output voltage adjustment (210V-240V or 105V-135V)
Adjust counterclockwise to decrease AC output voltage
Turn clockwise to raise the AC output voltage
If the machine is connected to the battery and home mains at the same time, the machine will
use Inverter function first. When the battery voltage is lower than 10.5V(for 12V inverter) or
21.5V(for 24V inverter), the machine will automatically switch to charging mode. In charging
mode, the AC output will be from home mains. When the battery voltage rises to 14V(for 12V
inverter) or 28V(for 24V inverter), the machine will automatically convert back to Inverter
function, when switching the function will not affect the use of appliances.
If the machine is connected to the battery and home mains at the same time, the machine
priority to use the home mains electricity, if the home mains electricity is failure, the machine
will be automatically converted into Inverter function to run the home appliances.
Power Jack Electric Co.,Ltd.
B-202 DaXi Street, Quanzhou, Fujian