SlideShare a Scribd company logo
1 of 22
Prasanta sarkar
Powerpoint presentation
Mirmadan Mohanlal Govt.
Polytechnic
• Topic:
Synchronous Motor
Synchronous motor
A synchronous electric motor is an ac motor in which, at steady
state, the rotation of the shaft is synchronized with the frequency
of the supply current; the rotation period is exactly equal to an
integral number of AC cycles. Synchronous motors contain
multiphase AC electromagnets on the stator of the motor that
create a magnetic field which rotates in time with the oscillations
of the line current. The rotor with permanent magnets
or electromagnets turns in step with the stator field at the same
rate and as a result, provides the second synchronized rotating
magnet field of any AC motor. A synchronous motor is only
considered doubly fed if it is supplied with independently excited
multiphase AC electromagnets on both the rotor and stator.
Types of synchronous motor
• Synchronous motors fall under the more general category
of synchronous machines which also includes the
synchronous generator. Generator action will be observed if
the field poles are "driven ahead of the resultant air-gap flux
by the forward motion of the prime mover". Motor action
will be observed if the field poles are "dragged behind the
resultant air-gap flux by the retarding torque of a
shaft load".
• There are two major types of synchronous motors depending
on how the rotor is magnetized: non-excited and direct-
current excited.
Those types are
• Non-excited motor:-
In non-excited motors, the rotor is made of steel. At
synchronous speed it rotates in step with the rotating magnetic
field of the stator, so it has an almost-constant magnetic field
through it. The external stator field magnetizes the rotor,
inducing the magnetic poles needed to turn it. The rotor is
made of a high-retentivity steel such as cobalt steel. These are
manufactured in
permanent magnet, reluctance and hysteresis designs.
• DC-excited motors
Usually made in larger sizes (larger than about 1
horsepower or 1 kilowatt) these motors require direct current
(DC) supplied to the rotor for excitation. This is most
straightforwardly supplied through slip rings, but
a brushless AC induction and rectifier arrangement may also be
used. The direct current may be supplied from a separate DC
source or from a DC generator directly connected to the motor
shaft.
Construction
• The principal components of a synchronous motor are the stator
and the rotor. The stator of synchronous motor and stator of
induction motor are similar in construction. With the wound-
rotor synchronous doubly fed electric machine as the exception,
the stator frame contains wrapper plate.Circumferential
ribs and keybars are attached to the wrapper plate. To carry the
weight of the machine, frame mounts and footings are
required.When the field winding is excited by DC excitation,
brushes and slip rings are required to connect to the excitation
supply. The field winding can also be excited by a brushless
exciter. Cylindrical, round rotors, (also known as non salient pole
rotor) are used for up to six poles. In some machines or when a
large number of poles are needed, a salient pole rotor is used. The
construction of synchronous motor is similar to that of a
synchronous alternator.
Operation
• The operation of a synchronous motor is due to the interaction of
the magnetic fields of the stator and the rotor. Its stator winding,
which consists of a 3 phase winding, is provided with a 3 phase
supply, and the rotor is provided with a DC supply. The 3 phase
stator winding carrying 3 phase currents produces 3 phase rotating
magnetic flux (and therefore a rotating magnetic field). The rotor
locks in with the rotating magnetic field and rotates along with it.
Once the rotor locks in with the rotating magnetic field, the motor is
said to be in synchronization. A single-phase (or two-phase derived
from single phase) stator winding is possible, but in this case the
direction of rotation is not defined and the machine may start in
either direction unless prevented from doing so by the starting
arrangements.
• Once the motor is in operation, the speed of the motor is dependent
only on the supply frequency. When the motor load is increased
beyond the breakdown load, the motor falls out of synchronization
and the field winding no longer follows the rotating magnetic field.
Since the motor cannot produce (synchronous) torque if it falls out
of synchronization, practical synchronous motors have a partial or
complete squirrel-cage damper (amortisseur) winding to stabilize
operation and facilitate starting. Because this winding is smaller
than that of an equivalent induction motor and can overheat on
long operation, and because large slip-frequency voltages are
induced in the rotor excitation winding, synchronous motor
protection devices sense this condition and interrupt the power
supply (out of step protection).
Starting methods
• Above a certain size, synchronous motors are not self-starting
motors. This property is due to the inertia of the rotor; it cannot
instantly follow the rotation of the magnetic field of the stator. Since
a synchronous motor produces no inherent average torque at
standstill, it cannot accelerate to synchronous speed without some
supplemental mechanism.
• Large motors operating on commercial power frequency include a
squirrel-cage induction winding which provides sufficient torque for
acceleration and which also serves to damp oscillations in motor
speed in operation. Once the rotor nears the synchronous speed, the
field winding is excited, and the motor pulls into synchronization.
Very large motor systems may include a "pony" motor that
accelerates the unloaded synchronous machine before load is
applied.
Motors that are electronically controlled can be accelerated from zero
speed by changing the frequency of the stator current.
Very small synchronous motors are commonly used in line-
powered electric mechanical clocks or timers that use the power line
frequency to run the gear mechanism at the correct speed. Such small
synchronous motors are able to start without assistance if the moment
of inertia of the rotor and its mechanical load is sufficiently small
[because the motor] will be accelerated from slip speed up to
synchronous speed during an accelerating half cycle of the reluctance
torque."Single-phase synchronous motors such as in electric wall clocks
can freely rotate in either direction unlike a shaded-pole type.
See Shaded-pole synchronous motor for how consistent starting
direction is obtained.
Advantages
• Synchronous motors have the following advantages over non-
synchronous motors:
• Speed is independent of the load, provided an adequate field
current is applied.
• Accurate control in speed and position using open loop controls,
e.g. stepper motors.
• They will hold their position when a DC current is applied to both
the stator and the rotor windings.
• Their power factor can be adjusted to unity by using a proper
field current relative to the load. Also, a "capacitive" power
factor, (current phase leads voltage phase), can be obtained by
increasing this current slightly, which can help achieve a better
power factor correction for the whole installation.
• Their construction allows for increased electrical efficiency when
a low speed is required (as in ball mills and similar apparatus).
• They run either at the synchronous speed else no speed is there.
Uses
• Synchronous motors find applications in all industrial
applications where constant speed is necessary.
• Improving the power factor as Synchronous condensers.
• Electrical power plants almost always use synchronous
generators because it is important to keep the frequency
constant at which the generator is connected.
• Low power applications include positioning machines,
where high precision is required, and robot actuators.
• Mains synchronous motors are used for electric clocks.
• Record player turntables
Thank you so much

More Related Content

What's hot

What's hot (20)

Synchronous motor
Synchronous motorSynchronous motor
Synchronous motor
 
Permanent magnet brushless dc motors ppt
Permanent magnet brushless dc motors pptPermanent magnet brushless dc motors ppt
Permanent magnet brushless dc motors ppt
 
Three phase Induction Motor (Construction and working Principle)
Three phase Induction Motor (Construction and working Principle)Three phase Induction Motor (Construction and working Principle)
Three phase Induction Motor (Construction and working Principle)
 
single-phase-induction-motor.ppt
single-phase-induction-motor.pptsingle-phase-induction-motor.ppt
single-phase-induction-motor.ppt
 
Bldc motors ppt
Bldc motors pptBldc motors ppt
Bldc motors ppt
 
Linear Induction Motor
Linear Induction MotorLinear Induction Motor
Linear Induction Motor
 
Induction motor
Induction motorInduction motor
Induction motor
 
Alternator
AlternatorAlternator
Alternator
 
Induction machines
Induction machinesInduction machines
Induction machines
 
Dc motor
Dc motorDc motor
Dc motor
 
Synchronous motor (working principle)
Synchronous motor (working principle)Synchronous motor (working principle)
Synchronous motor (working principle)
 
Brushless dc motor
Brushless dc motorBrushless dc motor
Brushless dc motor
 
Induction motors
Induction motorsInduction motors
Induction motors
 
3 ph induction motor ppt
3 ph induction motor ppt3 ph induction motor ppt
3 ph induction motor ppt
 
universal motor
universal motor universal motor
universal motor
 
Synchronous machines
Synchronous machinesSynchronous machines
Synchronous machines
 
Speed Control Of DC Motor
Speed Control Of DC MotorSpeed Control Of DC Motor
Speed Control Of DC Motor
 
Single phase induction motor
Single phase induction motorSingle phase induction motor
Single phase induction motor
 
Synchronous motor drive
Synchronous motor driveSynchronous motor drive
Synchronous motor drive
 
Repulsion motor
Repulsion motorRepulsion motor
Repulsion motor
 

Similar to synchronous motor for presentation

SYNCHRONOUS MOTOR PROJECT REPORT
SYNCHRONOUS MOTOR PROJECT REPORT SYNCHRONOUS MOTOR PROJECT REPORT
SYNCHRONOUS MOTOR PROJECT REPORT karmbir saini
 
Ac motors and their types
Ac motors and their typesAc motors and their types
Ac motors and their typesYasar Hayat
 
TOPIC 4.1- A.C. Motors.pptx
TOPIC 4.1- A.C. Motors.pptxTOPIC 4.1- A.C. Motors.pptx
TOPIC 4.1- A.C. Motors.pptxMartMantilla1
 
ppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfk
ppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfkppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfk
ppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfkKamaliyavishalKamali
 
AC Motors,Types & Applications.pptx
AC Motors,Types & Applications.pptxAC Motors,Types & Applications.pptx
AC Motors,Types & Applications.pptxHASNAINNAZIR1
 
General terms in the study of electrical machines
General terms in the study of electrical machinesGeneral terms in the study of electrical machines
General terms in the study of electrical machinesSimon Peter Kimbugwe
 
20ME702– MECHATRONICS -UNIT-5-Motor.ppt
20ME702– MECHATRONICS -UNIT-5-Motor.ppt20ME702– MECHATRONICS -UNIT-5-Motor.ppt
20ME702– MECHATRONICS -UNIT-5-Motor.pptMohanumar S
 
MECHATRONICS Unit-5-Motor.ppt
MECHATRONICS Unit-5-Motor.pptMECHATRONICS Unit-5-Motor.ppt
MECHATRONICS Unit-5-Motor.pptkarthik R
 
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS Mohanumar S
 
Presentation induction motors 2
Presentation induction motors 2Presentation induction motors 2
Presentation induction motors 2Edmund Lor
 
THREE PHASE SYNCHRONOUS MOTOR
THREE PHASE SYNCHRONOUS MOTORTHREE PHASE SYNCHRONOUS MOTOR
THREE PHASE SYNCHRONOUS MOTORsahed dewan
 
Unit 3 EHV - I.pptx
Unit 3 EHV - I.pptxUnit 3 EHV - I.pptx
Unit 3 EHV - I.pptxPavanP76
 
Electric motor
Electric motorElectric motor
Electric motorRAHMAT EIE
 
DC compound motor ppt
DC compound motor pptDC compound motor ppt
DC compound motor pptSahib Ullah
 
Synchronous motor drive
Synchronous motor driveSynchronous motor drive
Synchronous motor drivedharmesh nakum
 

Similar to synchronous motor for presentation (20)

Electric Motors
Electric MotorsElectric Motors
Electric Motors
 
SYNCHRONOUS MOTOR PROJECT REPORT
SYNCHRONOUS MOTOR PROJECT REPORT SYNCHRONOUS MOTOR PROJECT REPORT
SYNCHRONOUS MOTOR PROJECT REPORT
 
Ac motors
Ac motorsAc motors
Ac motors
 
Ac motors and their types
Ac motors and their typesAc motors and their types
Ac motors and their types
 
TOPIC 4.1- A.C. Motors.pptx
TOPIC 4.1- A.C. Motors.pptxTOPIC 4.1- A.C. Motors.pptx
TOPIC 4.1- A.C. Motors.pptx
 
ppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfk
ppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfkppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfk
ppt on vfd.pptxfjfjfjfkfkfkdkdkfkfjfjfkfkfk
 
AC Motors,Types & Applications.pptx
AC Motors,Types & Applications.pptxAC Motors,Types & Applications.pptx
AC Motors,Types & Applications.pptx
 
General terms in the study of electrical machines
General terms in the study of electrical machinesGeneral terms in the study of electrical machines
General terms in the study of electrical machines
 
AC Motors-Asynchronous
AC Motors-AsynchronousAC Motors-Asynchronous
AC Motors-Asynchronous
 
Synchronous machine
Synchronous machineSynchronous machine
Synchronous machine
 
20ME702– MECHATRONICS -UNIT-5-Motor.ppt
20ME702– MECHATRONICS -UNIT-5-Motor.ppt20ME702– MECHATRONICS -UNIT-5-Motor.ppt
20ME702– MECHATRONICS -UNIT-5-Motor.ppt
 
MECHATRONICS Unit-5-Motor.ppt
MECHATRONICS Unit-5-Motor.pptMECHATRONICS Unit-5-Motor.ppt
MECHATRONICS Unit-5-Motor.ppt
 
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
 
Presentation induction motors 2
Presentation induction motors 2Presentation induction motors 2
Presentation induction motors 2
 
THREE PHASE SYNCHRONOUS MOTOR
THREE PHASE SYNCHRONOUS MOTORTHREE PHASE SYNCHRONOUS MOTOR
THREE PHASE SYNCHRONOUS MOTOR
 
Unit 3 EHV - I.pptx
Unit 3 EHV - I.pptxUnit 3 EHV - I.pptx
Unit 3 EHV - I.pptx
 
Electric motor
Electric motorElectric motor
Electric motor
 
DC compound motor ppt
DC compound motor pptDC compound motor ppt
DC compound motor ppt
 
Chapter 6 slide
Chapter 6 slideChapter 6 slide
Chapter 6 slide
 
Synchronous motor drive
Synchronous motor driveSynchronous motor drive
Synchronous motor drive
 

Recently uploaded

Introduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptxIntroduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptxupamatechverse
 
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSMANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSSIVASHANKAR N
 
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...roncy bisnoi
 
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...ranjana rawat
 
AKTU Computer Networks notes --- Unit 3.pdf
AKTU Computer Networks notes ---  Unit 3.pdfAKTU Computer Networks notes ---  Unit 3.pdf
AKTU Computer Networks notes --- Unit 3.pdfankushspencer015
 
Introduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptxIntroduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptxupamatechverse
 
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...Call Girls in Nagpur High Profile
 
Porous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writingPorous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writingrakeshbaidya232001
 
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Christo Ananth
 
University management System project report..pdf
University management System project report..pdfUniversity management System project report..pdf
University management System project report..pdfKamal Acharya
 
The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...
The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...
The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...ranjana rawat
 
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdfONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdfKamal Acharya
 
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur High Profile
 
Glass Ceramics: Processing and Properties
Glass Ceramics: Processing and PropertiesGlass Ceramics: Processing and Properties
Glass Ceramics: Processing and PropertiesPrabhanshu Chaturvedi
 
Processing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxProcessing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxpranjaldaimarysona
 
UNIT-II FMM-Flow Through Circular Conduits
UNIT-II FMM-Flow Through Circular ConduitsUNIT-II FMM-Flow Through Circular Conduits
UNIT-II FMM-Flow Through Circular Conduitsrknatarajan
 
Introduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxIntroduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxupamatechverse
 
Call Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur Escorts
Call Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur EscortsCall Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur Escorts
Call Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur High Profile
 
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...Dr.Costas Sachpazis
 
Russian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur Escorts
Russian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur EscortsRussian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur Escorts
Russian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur High Profile
 

Recently uploaded (20)

Introduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptxIntroduction to Multiple Access Protocol.pptx
Introduction to Multiple Access Protocol.pptx
 
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSMANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
 
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...
 
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
 
AKTU Computer Networks notes --- Unit 3.pdf
AKTU Computer Networks notes ---  Unit 3.pdfAKTU Computer Networks notes ---  Unit 3.pdf
AKTU Computer Networks notes --- Unit 3.pdf
 
Introduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptxIntroduction and different types of Ethernet.pptx
Introduction and different types of Ethernet.pptx
 
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...Top Rated  Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
 
Porous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writingPorous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writing
 
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
 
University management System project report..pdf
University management System project report..pdfUniversity management System project report..pdf
University management System project report..pdf
 
The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...
The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...
The Most Attractive Pune Call Girls Budhwar Peth 8250192130 Will You Miss Thi...
 
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdfONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf
 
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
 
Glass Ceramics: Processing and Properties
Glass Ceramics: Processing and PropertiesGlass Ceramics: Processing and Properties
Glass Ceramics: Processing and Properties
 
Processing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxProcessing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptx
 
UNIT-II FMM-Flow Through Circular Conduits
UNIT-II FMM-Flow Through Circular ConduitsUNIT-II FMM-Flow Through Circular Conduits
UNIT-II FMM-Flow Through Circular Conduits
 
Introduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxIntroduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptx
 
Call Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur Escorts
Call Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur EscortsCall Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur Escorts
Call Girls Service Nagpur Tanvi Call 7001035870 Meet With Nagpur Escorts
 
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
Sheet Pile Wall Design and Construction: A Practical Guide for Civil Engineer...
 
Russian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur Escorts
Russian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur EscortsRussian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur Escorts
Russian Call Girls in Nagpur Grishma Call 7001035870 Meet With Nagpur Escorts
 

synchronous motor for presentation

  • 4. Synchronous motor A synchronous electric motor is an ac motor in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of AC cycles. Synchronous motors contain multiphase AC electromagnets on the stator of the motor that create a magnetic field which rotates in time with the oscillations of the line current. The rotor with permanent magnets or electromagnets turns in step with the stator field at the same rate and as a result, provides the second synchronized rotating magnet field of any AC motor. A synchronous motor is only considered doubly fed if it is supplied with independently excited multiphase AC electromagnets on both the rotor and stator.
  • 5. Types of synchronous motor • Synchronous motors fall under the more general category of synchronous machines which also includes the synchronous generator. Generator action will be observed if the field poles are "driven ahead of the resultant air-gap flux by the forward motion of the prime mover". Motor action will be observed if the field poles are "dragged behind the resultant air-gap flux by the retarding torque of a shaft load". • There are two major types of synchronous motors depending on how the rotor is magnetized: non-excited and direct- current excited.
  • 6.
  • 7.
  • 8. Those types are • Non-excited motor:- In non-excited motors, the rotor is made of steel. At synchronous speed it rotates in step with the rotating magnetic field of the stator, so it has an almost-constant magnetic field through it. The external stator field magnetizes the rotor, inducing the magnetic poles needed to turn it. The rotor is made of a high-retentivity steel such as cobalt steel. These are manufactured in permanent magnet, reluctance and hysteresis designs.
  • 9. • DC-excited motors Usually made in larger sizes (larger than about 1 horsepower or 1 kilowatt) these motors require direct current (DC) supplied to the rotor for excitation. This is most straightforwardly supplied through slip rings, but a brushless AC induction and rectifier arrangement may also be used. The direct current may be supplied from a separate DC source or from a DC generator directly connected to the motor shaft.
  • 10.
  • 11. Construction • The principal components of a synchronous motor are the stator and the rotor. The stator of synchronous motor and stator of induction motor are similar in construction. With the wound- rotor synchronous doubly fed electric machine as the exception, the stator frame contains wrapper plate.Circumferential ribs and keybars are attached to the wrapper plate. To carry the weight of the machine, frame mounts and footings are required.When the field winding is excited by DC excitation, brushes and slip rings are required to connect to the excitation supply. The field winding can also be excited by a brushless exciter. Cylindrical, round rotors, (also known as non salient pole rotor) are used for up to six poles. In some machines or when a large number of poles are needed, a salient pole rotor is used. The construction of synchronous motor is similar to that of a synchronous alternator.
  • 12.
  • 13. Operation • The operation of a synchronous motor is due to the interaction of the magnetic fields of the stator and the rotor. Its stator winding, which consists of a 3 phase winding, is provided with a 3 phase supply, and the rotor is provided with a DC supply. The 3 phase stator winding carrying 3 phase currents produces 3 phase rotating magnetic flux (and therefore a rotating magnetic field). The rotor locks in with the rotating magnetic field and rotates along with it. Once the rotor locks in with the rotating magnetic field, the motor is said to be in synchronization. A single-phase (or two-phase derived from single phase) stator winding is possible, but in this case the direction of rotation is not defined and the machine may start in either direction unless prevented from doing so by the starting arrangements.
  • 14.
  • 15. • Once the motor is in operation, the speed of the motor is dependent only on the supply frequency. When the motor load is increased beyond the breakdown load, the motor falls out of synchronization and the field winding no longer follows the rotating magnetic field. Since the motor cannot produce (synchronous) torque if it falls out of synchronization, practical synchronous motors have a partial or complete squirrel-cage damper (amortisseur) winding to stabilize operation and facilitate starting. Because this winding is smaller than that of an equivalent induction motor and can overheat on long operation, and because large slip-frequency voltages are induced in the rotor excitation winding, synchronous motor protection devices sense this condition and interrupt the power supply (out of step protection).
  • 16.
  • 17. Starting methods • Above a certain size, synchronous motors are not self-starting motors. This property is due to the inertia of the rotor; it cannot instantly follow the rotation of the magnetic field of the stator. Since a synchronous motor produces no inherent average torque at standstill, it cannot accelerate to synchronous speed without some supplemental mechanism. • Large motors operating on commercial power frequency include a squirrel-cage induction winding which provides sufficient torque for acceleration and which also serves to damp oscillations in motor speed in operation. Once the rotor nears the synchronous speed, the field winding is excited, and the motor pulls into synchronization. Very large motor systems may include a "pony" motor that accelerates the unloaded synchronous machine before load is applied.
  • 18. Motors that are electronically controlled can be accelerated from zero speed by changing the frequency of the stator current. Very small synchronous motors are commonly used in line- powered electric mechanical clocks or timers that use the power line frequency to run the gear mechanism at the correct speed. Such small synchronous motors are able to start without assistance if the moment of inertia of the rotor and its mechanical load is sufficiently small [because the motor] will be accelerated from slip speed up to synchronous speed during an accelerating half cycle of the reluctance torque."Single-phase synchronous motors such as in electric wall clocks can freely rotate in either direction unlike a shaded-pole type. See Shaded-pole synchronous motor for how consistent starting direction is obtained.
  • 19.
  • 20. Advantages • Synchronous motors have the following advantages over non- synchronous motors: • Speed is independent of the load, provided an adequate field current is applied. • Accurate control in speed and position using open loop controls, e.g. stepper motors. • They will hold their position when a DC current is applied to both the stator and the rotor windings. • Their power factor can be adjusted to unity by using a proper field current relative to the load. Also, a "capacitive" power factor, (current phase leads voltage phase), can be obtained by increasing this current slightly, which can help achieve a better power factor correction for the whole installation. • Their construction allows for increased electrical efficiency when a low speed is required (as in ball mills and similar apparatus). • They run either at the synchronous speed else no speed is there.
  • 21. Uses • Synchronous motors find applications in all industrial applications where constant speed is necessary. • Improving the power factor as Synchronous condensers. • Electrical power plants almost always use synchronous generators because it is important to keep the frequency constant at which the generator is connected. • Low power applications include positioning machines, where high precision is required, and robot actuators. • Mains synchronous motors are used for electric clocks. • Record player turntables
  • 22. Thank you so much