Cloud Frontiers: A Deep Dive into Serverless Spatial Data and FME
How to cut logfile and check logfiles covering area v1.0
1. TeleResources Engineering (Australia) Pty Ltd
1.- How to cut a log file .gen
1.1 Identify the logfile to be cut and open Genex Probe
-Logfile->Export Data->
Segment-> Next
Rodrigo Orellana | Analysis Engineer Page 1
3. TeleResources Engineering (Australia) Pty Ltd
Genex Probe start to split the logs…
Finally you will find the new logfile in the path of the original log.
2.- How to Identify the area that cover one or more log files
2.1 – Open Genex Assistant and create a new project
Rodrigo Orellana | Analysis Engineer Page 3
4. TeleResources Engineering (Australia) Pty Ltd
-Put the name, choose the path and the kind of project-> OK
-Configuration-> Logfile Manager
Rodrigo Orellana | Analysis Engineer Page 4
6. TeleResources Engineering (Australia) Pty Ltd
In IE ->File ID->Display On Map
Enable Legend and activate Automatic Label
2.2.- How to know which ID belong to which logfile?
2.2.1.- It is according to the logfile’s name in the source directory, example:
Rodrigo Orellana | Analysis Engineer Page 6
7. TeleResources Engineering (Australia) Pty Ltd
The logs name in the source folder are:
The assistant plot show the following:
Rodrigo Orellana | Analysis Engineer Page 7
8. TeleResources Engineering (Australia) Pty Ltd
Then the Logfiles and ID are according to the figure above:
2.2.2.- You can load by parts and take snapshots to know which area cover each log
-Load the First Logfile
Rodrigo Orellana | Analysis Engineer Page 8
9. TeleResources Engineering (Australia) Pty Ltd
And see the log’s area:
-Later we load the second log and run the analysis,
Rodrigo Orellana | Analysis Engineer Page 9
10. TeleResources Engineering (Australia) Pty Ltd
- Now the covering area is:
-Then try, for example loading 3 more logs and run the analysis,
Rodrigo Orellana | Analysis Engineer Page 10
11. TeleResources Engineering (Australia) Pty Ltd
- the covering area is:
According to Assistant the logs ID are:
The same procedure could be done with the rest of the files
2.2.3 The third method is the easiest one, just click in one point and the name of the log will be
displayed down.
Rodrigo Orellana | Analysis Engineer Page 11