Powerful Google developer tools for immediate impact! (2023-24 C)
Automatic meter reading
1. Automatic Meter Reading
AUTOMATIC METER READING
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Presented by:
Amrita Pattnaik
Roll # EE200199180
Advisor :
Mr. Debashisha Jena
2. Automatic Meter Reading
TOPICS TO BE DISCUSSED
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
• What’s AMR?
• How does the system works? & its operating principle.
• Host Central Station Hardware And Software
Requirements(HCS).
• Data Concentrator Unit(DCU).
• Multi-Channel Meter Interface Unit(MIU).
• Single Phase Meter Interface Unit(MIU).
• MIU FOR Water,Gas and Other Meters.
• Handheld Programming Unit(HPU).
• Benefits of AMR to the utilities' customer.
• AMR Function &Features.
3. Automatic Meter Reading
INTRODUCTION
• The meaning of AMR:
Automatic meter reading (AMR) is the collection of, at a
remote central location, data from consumption meters
located at customers’ premises via telecommunication
links.
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
The meters could measure gas, water or electricity flow.
These links could be Telephone lines, powerline carrier
communication (PLCC), Radio frequency CATV etc.
4. Automatic Meter Reading
INTRODUCTION(contd.)
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Automatic Meter Reading (AMR) is a telephone-based,
calling outbound system, for utility control and reliable,
low-cost meter reading.
With the use of AMR, the need of a person to visit the
consumer’s site and record the readings of the meters is
eliminated. This also prevents human errors in recording
the reading
5. Automatic Meter Reading
WHAT’S AMR
AMR brings significant benefits to the customer by
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
providing increased meter-reading accuracy, fewer
estimated bills, rapid response to read requests, automatic
leak detection and billing options and provids detailed
usage information about individual sites, which allows the
utility to offer variable rates and encourage price-responsive
behavior among customers.
AMR improves operational management by providing
just-in-time meter replacement, tamper detection, remote
access, and automatic scheduling of meter reading. In
short, AMR will optimize cost savings and maximize
efficiency for Anglian Water while providing improved
customer service.
6. Automatic Meter Reading
HOW DOES THE SYSTEM
WORKS?
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
The key to the system is a device called an
ERT( Encoder-Receiver-Transmitter).
This device is connected directly to a special electronic
register on the water meter.
Normally, the ERT does nothing - it "sleeps," waiting for
the meter reader to approach.
The meter truck-mounted reading the device sends out a
continuous "wake up" signal.
When an ERT receives the signal, it checks the reading on
the meter register, encodes it into a digital signal, and
begins transmitting its identification number and the
current reading.
7. Automatic Meter Reading
HOW DOES THE SYSTEMS
WORKS?(contd.)
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
After a few minutes, the ERT stops transmitting and goes
back "to sleep," waiting for the next time meter reading.
The truck-mounted computer system matches the ERT
identification number with the property and records the
reading. At the end of the day, the meter reader unloads the
information to our billing system.
AMR also need Meter Interface Unit (MIU).It responds to
calls initiated through the software installed on a PC. A
simple three-wire hook-up from the encoded register
provides input from the meters to the MIU.
8. Automatic Meter Reading
OPERATING PRINCIPLE
To operate the AMR, Power Line Modem (PLM) is used,
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
which transmits and receives data over the power line.
The PLMs operate in a Half Duplex, two-way, Time
Division Multiplex communication mode.
Both the MIU and the DCU contain the PLM device.
The binary data stream is keyed onto a carrier signal by
means of the Frequency Shift Keying (FSK) technique.
The central frequency is shifted +0.3KHz to represent 1 or
0 of the binary data stream. s then coupled onto the power
line by the PLM.
At the receiving end, an identical PLM will detect the
signal and convert it back to a binary data stream. ode.
9. Automatic Meter Reading
AMR SYSTEM OVERVIEW
• The remote Automatic Meter Reading (AMR)
System is a host driven, multi-level network
system consisting of a Host Central Station (HCS),
Data Concentrator Units (DCU) and Meter
Interfacing Units (MIU), with built-in flexibility
and expandability.
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Host Central Station Hardware And Software Requirements(HCS).
Data Concentrator Unit(DCU).
Multi-Channel Meter Interface Unit(MIU).
Single Phase Meter Interface Unit(MIU).
Handheld Programming Unit(HPU).
10. Automatic Meter Reading
BLOCK DIAGRAM OF AMR
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
11. Automatic Meter Reading
BENEFITS OF AMR TO UTILITIES
Reduced meter reading costs.
Ability to access difficult-to-read meters.
Improved customer service.
Reduced percentage of estimated bills.
Improved meter reader safety.
Implementation of real-time pricing.
Reduced read-to-bill time.
Distribution automation.
Improved fraud detection.
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
12. Automatic Meter Reading
AMR OVER CONVENTIONAL
METER READING
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Obtain more easily initial and final meter readings for
opening and closing accounts.
Streamline high bill investigations.
Help pinpoint system losses.
Help detect theft of service.
Enable more frequent readings with little incremental cost.
Enable custom billing dates.
Support customized rates (e.g. for large customers).
Provide detailed consumption information to customers.
13. Automatic Meter Reading
AMR OVER CONVENTIONAL
METER READING(contd.)
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Provide watchdog service, like leakage monitoring.
Improve revenue forecasting by tying detailed
consumption information to production data and expected
billings.
Aid in rate design.
Reduce bill adjustments.
Meters can be read even in case the homes are locked.
14. Automatic Meter Reading
IMPLEMENTATION OF
PROPER AMR SCHME
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Telephone lines
Powerline carriers
Radio Frequencies (VHF/UHF etc)
Cable Television (CATV) cables
Bluetooth
General Packet Rad
15. Automatic Meter Reading
AMR Function & Features
Technical Seminar Presentation AMRITA PATTNAIK EE200199180
Time of Use and Meter Reading
Self-diagnostic and Status Reporting
Networking and System Hierarchy
Data Communication and Other Functions
Compatibility with water and gas metering systems
Use of Ethernet LAN/ Internet for Remote Meter
Reading and Data Management.
16. Automatic Meter Reading
CONCLUSION
Since automatic meter reading is all about “Reading a
utility meter without the requirement for visual inspection
of the meter”, it is indeed an easy and fail-safe method for
monitoring consumption details of a customer.
Automatic Meter Reading can detect meter tampering and
illegal drawing of power (hooking/power pilfering).
AMR as a way of improving customer service while
reducing the cost of reading meters.
The Automatic Meter Reading system enables us to save
millions of dollars every year in meter reading costs and
also provide our customers with better information about
water use, more accurate billings, and keep rates as low as
we can.
Technical Seminar Presentation AMRITA PATTNAIK EE200199180