Simtec, the Elite Ansys Channel Partner for SE, organizes introductory online trainings for Ansys electromagnetic software. This is the best way to learn everything you need to know about how ansys software can help improve your products and always be ahead of competition! Simtec experts, with more than 20 years of experience in simulation will guide you to your way to success!

1. Online Training
Agenda
Introductory Training
in Ansys
Electromagnetics
23rd, 24th, 25th, 26th of May 2023

2. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys HFSS 2031R1 Introductory Training – 23 May 2023
 Introduction to Ansys HFSS
 Eigenmodes and s-parameters
 Adaptive, broadband meshing
 Electromagnetic Interference
 Tuning with Analytic Derivatives
 Parametric & Optimization Analysis
 Transient analysis

3. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys Maxwell 2023R1 Introductory Training – 24 May 2023
 Introduction to Ansys Maxwell
 Maxwell Magnetostatic 2D/3D
 Electrostatic Analysis 2D/3D
 Eddy Current solver 2D/3D
 Magnetic Transient
 Parametric Analysis
 Multiphysics

4. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys SIwave 2023R1 Introductory Training – 25 May 2023
 Introduction to Ansys SIwave
 Import process
 Setting Ports and s-parameters
 PCB scan, impedance profiles and crosstalk
 Signal Integrity and Electromagnetic interference
 Power Integrity
 Thermal Integrity

5. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys Icepak 2023R1 Introductory Training – 26 May 2023
§ Introduction to Ansys Icepak
§ Steps to create/import geometry in ANSYS Icepak and ANSYS Spaceclaim
§ Inputs and boundary conditions required to perform Flow and Thermal
simulations
§ Meshing in ANSYS Icepak
§ Model setup, inputs and boundary conditions
§ Solver settings for steady state and transient modelling
§ Parametric Analyses
§ Result post-processing