Why we need seat belt in our car and how can we avoid fatal errors while using our seat belt.

3. Seat belts are anchored in a
vehicle to avoid collision with
the internal structures.
It is an important safety
device in a vehicle, to avoid
scratching it made with soft
materials.
The provision of seat belt is
an essential condition for the
approval of a vehicle to be
registered.
Requirement

5. Seat belt was invented more than a
century, a French man created in
1903.
In 1960 seat belt was lunched in
market under a standard size.
In 1973 France declared the
mandatory seat belt law and United
states followed the rule as
compulsory in 1975.

7. Belts
Retractor
Controller
Berths
Oscillating
Ring
Buckle
with
release
button
Pretensioner

8.  It’s a flexible component
designed to hold the body of
occupants.
It consists of web of interwoven
standards polymer to avoid scratch
in user’s neck.

9. It is used to lock the belt.

10. Controller can adjust the seat belt , (when
belt passes about halfway from tip of
shoulder and neck).

11.  Berth are available in attachment points of seat
belt and vehicle body, it’s an important part of seat
belt.

12. It is a tool that
allows the seat belt
which passes into
the anchorage.
It is made of steel with
a molded plastic cover
of good quality.

14. Pretensioner drives a piston that can
retract the seat belt.
When getting any type of problem in
it then it is no longer repairable but
must be replaced.
It is not activated if the belt is not
withdrawn. Used to block the body
of the occupant on the seat in place.

15.  It is a connecting device that can connect the harness
to the anchor point of vehicle.

16. Lap
Harness
Three
Points
Diagonal

17.  Lap belt is a strap that goes over
waist and for install, it requires 3
point belts.
 Generally in old cars, you can get
this type of belts equipped.

18.  This type of belt wraps
around the chest at an
angle.
 It has two anchor
points and is used in both
front & rear seat.

19.  This type of seat belt
first introduced in Volvo
cars.
 The belts secure both
upper and lower body.

20.  This type of belt consists of lap
belt and two shoulder straps.
 Basically this type of belts are
used in racing cars.

22. Seat belt usage reduces the chance of traffic
related fatalities by 45 percent.
In many cases, wearing seat belt prevents
ejection from the vehicle.
Seat belt wearing minimizes the body’s
contact with the interior of car resulting in
fewer injury.
Seat belts spread the force of impact over
larger parts of the body reducing severity of
injuries.

24. Proper use of seat belt gives
a secure drive and save life.
So always use it for safe
drive.

25. Thank You
http://www.jeffsmbz.com/