SlideShare a Scribd company logo
1 of 30
Download to read offline
3G Tems Parameters Investigation and Drive Testing
Syed Mohib Hussain (ZTE Engineer Team C-III)
Mohib Naqvi
内部公开▲
WCDMA
Mohib Naqvi
What is Drive Test?
•The Drive Test is a test performed in cellular networks regardless of technology (GSM, CDMA,
UMTS, LTE, etc. ...) usually Performed in order to Analyze and optimize the Network Quality.
•Drive Test is used to analyze and optimize the network quality.
•Although by the analysis of KPI's we can identify problems of Parametrical Issues e.g. (CDR,
Interference, Traffic etc. etc….) while the drive tests allow a deeper analysis in the field. Identifying
areas of each sector of coverage, interference, evaluation of network changes and various other
parameters.
Mohib Naqvi
内部公开▲
Why we Perform Drive Test?
• Every alive network needs to be under continues control to
maintain/improve the performance.
• Optimization is the only way to keep track of the network by
looking deep into statistics and collecting and analyzing drive
Test data.
• Drive Test helps operation and maintenance for trouble shooting
purpose.
Mohib Naqvi
内部公开▲
WCDMA 3G UMTS
Mohib Naqvi
内部公开▲
Drive Test Tools
 Tools used for 3g Drive Testing are enlisted below:
 Tems Investigation, Nemo , Probe for WCDMA (Software)
 Doungle (License)
 User Equipment's (Sonny Ericsson W995)
 Data card (3G supported for data testing)
 GPS
 Scanner
 Invertor
Mohib Naqvi
内部公开▲
Drive Test Types:
The main types of Drive Test are :
•Performance Analysis
•Integration of New Sites and change parameters of Existing Sites
•Marketing
•Benchmarking
Performance Analysis:
Tests for Analysis Performance is the most common, and usually made
into clusters (grouping of cells), ie, an area with some sites of interest.
They can also be performed in specific situations, as to answer a
customer complaint.
Mohib Naqvi
内部公开▲
New Site Verification:
When the site is completely integrated , Drive tester team will start to perform site
investigation.
The detailed sub-activities are outlined below:
1.Rigging Audit
2.Site Verification
3.Functionality Test’s
4.Acceptance Test
Mohib Naqvi
内部公开▲
Site Verification:
Mohib Naqvi
内部公开▲
Test Performed:
Test Performed on a New Roll out site are enlisted below:
•Sector Swap
•Audio calls
•Video calls
•R99
•HSPA (HSDPA & HSUPA)
•Cell Reselection
•IRAT (Inter Radio Access technology)
•Soft and Softer Handovers
•Coverage Test
Mohib Naqvi
内部公开▲
Site Verification:
Voice / Video Calls
Verify on per Basis for all carriers:
•RSCP
•Ec/No
•Scrambling code
•LAC/RAC
•Cell ID
•Etc etc.
Data and Throughput Test:
HSDPA / HSPUPA / R99
Verify on per Basis for all carriers:
•RSCP
•Ec/No
•Scrambling code
•LAC/RAC
•Cell ID
•Max & Avg Throughput
•Etc etc
Mohib Naqvi
内部公开▲
Static Test:
Audio Call:
Performed number of calls as defined by the operator on all the three
sectors of sites in order to determine if any call failure , dropped or
blocked is found.
Video Call:
Just Like Audio Calls number of video calls are also performed on all the
three sectors of sites in order to determine if any call failure , dropped or blocked
is found. Video call found should be successful.
It Takes 64kb/s data to transmit a call.
R99: (Release 99)
First Step Advancing toward Global 3G network. Can Support data rate
up-to 384kb/s and a dedicated channel is allocated for each specific user.
Perform Number of R99 Test by making a dial up connection and verify
the achieving speed.
Mohib Naqvi
内部公开▲
Static Test:
HSPA (HSDPA & HSUPA):
HSDPA:
High Speed downlink packet access is the total speed on a downlink channel
Ideally on single carier HSDPA will Provide Data Rate upto 14Mb/s and for
Dual carrier as like on Zong It is Providing data Rate upto 42 Mb/s.
Large and Huge Data Contained Files are downloaded Via Http or FTP to
perform this test. On Zong Minimum Average Speed for HSDPA Should be
more than 9mb/s. Moreover HSDPA used Dedicated Shared channel.
One Channel shared with number of users.
HSUPA:
High Speed Uplink packet access is the total speed on a uplink channel Ideally
on single carrier HSUPA will Provide Data Rate upto 5Mb/s and for Dual carrier as
like on Zong It is Providing double than that/
Large and Huge Data Contained Files are uploaded Via Http or FTP to perform this
test.
HSUPA always used E-DCH Channel.
Mohib Naqvi
内部公开▲
Cell Reselection:
• This test is performed to check weather
our cell is camping to better serving cell
or not in Ideal mode while moving from
one node B to another or one Sector to
another.
• Specific Threshhold level will be
adjusted for this parameter. It
Commonly depends upon the RSCP
and EcNo.
Mostly If EcNo Exceeds <-14 it will
Reselect a new cell.
• Forcefully Test:
WCDMA to forcefully on GSM
from Inter Radio access technology
option and then Back to WCDMA Ue
should not exceeds from 2secs while
reselecting a WCDMA cell from No
Service mode to RRC Eastablished.
Mohib Naqvi
内部公开▲
Inter Radio Access Technology (IRAT):
Inter Radio Access Technology Test Tells us in case we are in dedicated mode
and some where coverage levels of WCDMA are degraded or we are coming
out from the coverage area of WCDMA then our call instead of Dropping simply
switched on to a GSM Network.
Same like in this test we will check weather our cell is properly mapped with 2G
desired cell and MSC or not and is properly switching to GSM or not.
Mohib Naqvi
内部公开▲
Handovers:
Types of Hand over:
1.Soft Hand over: Make Before
break. Between two Node B’s at a
time connecting with number of
cells and first of all making the
connection with better serving cell
then release.
2.Softer Handover: Make Before
break. Between different sectors of
the same Node B and first of all
made the connection with better
serving cell then release.
3.Hard Handover: Break before
make. Intra frequency handover in
WCDMA.
Mohib Naqvi
内部公开▲
Sector Swap:
• Sector Swap is one of the major Test in
GSM,CDMA,UMTS,LTE… Drive Testing.
• In WCDMA 3g Sites we commonly faced a
complete swap in a new roll out site.
• Sector Swap in Telecom means If you are
standing in the coverage Area of Sector 1st
but you are going to be served with 2nd
sector and same like if you are standing in-
front of sector 2nd
and serving cell you
measures will be showing the results of
sector 1st
and same as In front of 3rd
Sector
you will be served by sector 2nd
.
• Here it shows abnormal behavior of the
network.
• By sector swap quality should be degraded
and as a results Drop calls and level of
interference should increase up to its extent.
Mohib Naqvi
内部公开▲
Coverage Test:
• Coverage Test is used to analyze the
network by monitoring RSCP, EcNo,
CQI, SIR, BLER etc etc.
• Coverage holes and others Missing or
Detective Neighbors Information can
be also measured.
• Block calls , Drop calls, Interference , PS
Attach Successful and Failure and other
abnormal event can also be monitored.
• Different Colour Coding shows the
Ranges of different Parameters.
• Map Info Tool is commonly used to
Plot the ranges of Power and
Interference by using Thermatic.
Mohib Naqvi
内部公开▲
Radio Parameters:
• CPICH EcNo
• CPICH RSCP
• Tx Power
• UTRA Carrier RSSI
• SIR
• Target SIR
• SQI
• RRC State
• Mode
Mohib Naqvi
内部公开▲
Radio Parameters:
CPICH Ec/No:
Chip Energy by Noise. Common Pilot channel EcNo is the ratio of the energy of the
chip and the combined power of all the signals including the specific pilot channel. It also
shows the level of Noise disrupting the specific CPICH.
Ranges for EcNo:
0 to -7 Good
-7 to -10 Acceptable
-10 to -36 Bad
CPICH RSCP:
Received signal Code Power is the level of the signal received by the U.E. or in
simple RSCP is the total power of the entire cell or a specific Common Pilot Channel
received by the user Equipment.
Ranges of RSCP:
-30 to -75 Good
-75 to -85 Acceptable
-85 to -140 Bad
Mohib Naqvi
内部公开▲
Radio Parameters:
Tx Power:
Tx Power is the transmitting power of the mobile station. Its value can vary from
50 to -50.
The minimum the Tx Power of the mobile station the better it is for call quality.
Tx Power is the power of mobile station only measured in the dedicated mode and
commonly mobile will support the call in case when you are in a low coverage area it
will increase its own power to support your call avoiding Droped.
RSSI:
Received Signal Strength Indicator is the total power of the entire common pilot
channel received by the Mobile station Including Neighbours interference and noise
as well of Neighbours and it self also.
RSSI= RSCP + EcNo
RSSI Ranges:
0 to -75 Good
-75 to -85 Acceptable
-85 to -140 Bad
Mohib Naqvi
内部公开▲
Radio Parameters:
SIR:
Signal to Interferance ratio is the ratio of
energy in the DPCC ( Dedicated Physical
control channel) to that of the interferance
and noise received by the User Equipment.
Target SIR:
It is the target signal to interferance ratio
that Mobile Equipment is supposed to
achieve by increasing or decreasing its
power. It is usually Set by the use of Power
Control Procedure.
Mohib Naqvi
内部公开▲
Radio Parameters:
SQI:
It is the speech quality index which is a parameter to rate the
voice quality on that particular call. It ranges from 0 to 30. while
30 being the Best Value.
Adaptive Multi Rate (AMR) is also used to enhanced the speech
or the voice quality of the specific call.
WCDMA use AMR Sourc Coding.
AMR vary with different Ranges Highest AMR Value is 12.20 and
lowest AMR value is 4.75.
RRC State:
It tells the current state and channel as in idle or dedicated.
Mode:
It is the Mode that We are Using Weather GSM or WCDMA.
Mohib Naqvi
内部公开▲
Serving and Active Set + Neighbour:
Cell I.D:
This is the Identity or name given to a particular Node B and its cells by the
operator.
UARFCN:
Universal Absolute radio Frequency channel Number is the frequency band
allotted to the operator. One Spectrum band width is of 5MHz in WCDMA or 3G.
Frequency for Uplink allotted to all the operators vary between 1920 to 1980
MHZ.
While
Frequency for Downlink allotted to all the operators vary between 2110 to 2170
MHZ.
Mohib Naqvi
内部公开▲
Serving and Active Set + Neighbour:
Cell Name:
Specific Name of the Node B alloted by the Operator according to its location and Serial value.
Scrambling Codes:
Scrambling Codes are usually used to identified different cells of a node B.
They are of Two types.
1- Secondary Scrambling Code
2- Primary Scrambling Code
Secondary Scrambling Code:
Used in a Beam forming case.
Primary Scrambling codes: (0 to 511)
Are actually the Scrambling codes usually used to identified different sectors. They totally lies from 0 to
8191. More over 512 PSC are divided into a group of 64.Each contains 8PSC.
Total Down link Scrambling Codes 16*8=512.
Mohib Naqvi
内部公开▲
Serving + Neighbours
AS:
Set of Scrambling codes on which the user equipment is currently latched on and
there can be at least maximum three scrambling's codes in a Active Set.
MN:
Neighbor cell that is detected by user equipment as a neighbor. Soft and Softer
Handover decision should be taken by measuring the Stronger RSCP and EcNo
then that of Active Set at least 32 Neighbor cells can be added in a single 3g site.
DN:
It is also the neighbor cell which is detected by the U.E but is not defined in our
network. Hence the U.E does not handover onto these cells. It can be because of
Overshooting, incomplete neighbor list or in case of a new site, It is very important to
optimize a network and have no DN’s as they are one of the major reasons of call
drops in 3G.
Mohib Naqvi
内部公开▲
HSPA and GSM Line Chart:
• This window gives us the data speed for both 2G and 3G
depending on the mode of user equipment.
• RLC DL Throughput ---- This is the total throughput on the
downlink at that particular point.
• You will find throughput values in Kb/s.
• RLC DL Throughput average should be more than 9mb/s.
Mohib Naqvi
内部公开▲
Pilot Pollution
Mohib Naqvi
内部公开▲
Pilot Pollution:
Mohib Naqvi
Mohib Naqvi

More Related Content

What's hot

Hw lte rf-optimization-guide
Hw lte rf-optimization-guideHw lte rf-optimization-guide
Hw lte rf-optimization-guidetharinduwije
 
3G Drive Test Procedure_ By Md Joynal Abaden
3G Drive Test Procedure_ By Md Joynal Abaden3G Drive Test Procedure_ By Md Joynal Abaden
3G Drive Test Procedure_ By Md Joynal AbadenMd Joynal Abaden
 
WCDMA RF optimization
WCDMA RF optimizationWCDMA RF optimization
WCDMA RF optimizationbasioni
 
422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...
422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...
422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...SudheeraIndrajith
 
Huawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shopHuawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shopnavaidkhan
 
3G drive test procedure (SSV) by Md Joynal Abaden
3G drive test procedure (SSV)  by Md Joynal Abaden3G drive test procedure (SSV)  by Md Joynal Abaden
3G drive test procedure (SSV) by Md Joynal AbadenMd Joynal Abaden
 
Lte rf-optimization-guide
Lte rf-optimization-guideLte rf-optimization-guide
Lte rf-optimization-guideMuhammad Ahsan
 
Layer 3 messages
Layer 3 messagesLayer 3 messages
Layer 3 messagesJohn Samir
 
LTE Optimization-KPIs.pptx
LTE Optimization-KPIs.pptxLTE Optimization-KPIs.pptx
LTE Optimization-KPIs.pptxHasanBilalKhan
 
RSCP RSSI EC/NO CQI
RSCP RSSI EC/NO CQIRSCP RSSI EC/NO CQI
RSCP RSSI EC/NO CQIFaraz Husain
 
13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doc13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doctharinduwije
 
Sharing session huawei network optimization january 2015 ver3
Sharing session huawei network optimization january 2015 ver3Sharing session huawei network optimization january 2015 ver3
Sharing session huawei network optimization january 2015 ver3Arwan Priatna
 
2 drive test analysis ver1
2 drive test analysis ver12 drive test analysis ver1
2 drive test analysis ver1Virak Sou
 
Presentation Rf Optimization And Planning
Presentation  Rf Optimization And PlanningPresentation  Rf Optimization And Planning
Presentation Rf Optimization And PlanningUmmaarraa Raa
 
Huawei parameter strategy v1.4 1st dec
Huawei parameter strategy v1.4  1st decHuawei parameter strategy v1.4  1st dec
Huawei parameter strategy v1.4 1st decKetut Widya
 
wcdma-drive-test-analysis-ppt-libre
wcdma-drive-test-analysis-ppt-librewcdma-drive-test-analysis-ppt-libre
wcdma-drive-test-analysis-ppt-libreNarcisse FOIDIENG
 

What's hot (20)

Hw lte rf-optimization-guide
Hw lte rf-optimization-guideHw lte rf-optimization-guide
Hw lte rf-optimization-guide
 
3G Drive Test Procedure_ By Md Joynal Abaden
3G Drive Test Procedure_ By Md Joynal Abaden3G Drive Test Procedure_ By Md Joynal Abaden
3G Drive Test Procedure_ By Md Joynal Abaden
 
WCDMA RF optimization
WCDMA RF optimizationWCDMA RF optimization
WCDMA RF optimization
 
422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...
422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...
422738668-LTE-Downlink-Throughput-Optimization-Based-on-Performance-Data [Rep...
 
Huawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shopHuawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shop
 
3G drive test procedure (SSV) by Md Joynal Abaden
3G drive test procedure (SSV)  by Md Joynal Abaden3G drive test procedure (SSV)  by Md Joynal Abaden
3G drive test procedure (SSV) by Md Joynal Abaden
 
Lte rf-optimization-guide
Lte rf-optimization-guideLte rf-optimization-guide
Lte rf-optimization-guide
 
Layer 3 messages
Layer 3 messagesLayer 3 messages
Layer 3 messages
 
LTE Optimization-KPIs.pptx
LTE Optimization-KPIs.pptxLTE Optimization-KPIs.pptx
LTE Optimization-KPIs.pptx
 
Wcdma RNO RF optimization
Wcdma RNO RF optimizationWcdma RNO RF optimization
Wcdma RNO RF optimization
 
RSCP RSSI EC/NO CQI
RSCP RSSI EC/NO CQIRSCP RSSI EC/NO CQI
RSCP RSSI EC/NO CQI
 
LTE Optimization
LTE OptimizationLTE Optimization
LTE Optimization
 
13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doc13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doc
 
Sharing session huawei network optimization january 2015 ver3
Sharing session huawei network optimization january 2015 ver3Sharing session huawei network optimization january 2015 ver3
Sharing session huawei network optimization january 2015 ver3
 
2 drive test analysis ver1
2 drive test analysis ver12 drive test analysis ver1
2 drive test analysis ver1
 
Presentation Rf Optimization And Planning
Presentation  Rf Optimization And PlanningPresentation  Rf Optimization And Planning
Presentation Rf Optimization And Planning
 
Huawei parameter strategy v1.4 1st dec
Huawei parameter strategy v1.4  1st decHuawei parameter strategy v1.4  1st dec
Huawei parameter strategy v1.4 1st dec
 
2 g dt and mapinfo
2 g dt and mapinfo2 g dt and mapinfo
2 g dt and mapinfo
 
TEMS PARAMETERS
TEMS PARAMETERSTEMS PARAMETERS
TEMS PARAMETERS
 
wcdma-drive-test-analysis-ppt-libre
wcdma-drive-test-analysis-ppt-librewcdma-drive-test-analysis-ppt-libre
wcdma-drive-test-analysis-ppt-libre
 

Viewers also liked

Interview question for 2g,3g,4g
Interview question for 2g,3g,4gInterview question for 2g,3g,4g
Interview question for 2g,3g,4gVijay Anand
 
Device to device communication
Device to device communicationDevice to device communication
Device to device communicationmohammad dabibi
 
Systesm information layer 3 messages
Systesm information layer 3 messagesSystesm information layer 3 messages
Systesm information layer 3 messagesTelebeansolutions
 
Events in tems products
Events in tems productsEvents in tems products
Events in tems productsTo Anh
 
Tems layer3_messages
Tems  layer3_messagesTems  layer3_messages
Tems layer3_messagesbadgirl3086
 
WCDMA optimization & Drive test analysis
WCDMA optimization & Drive test analysisWCDMA optimization & Drive test analysis
WCDMA optimization & Drive test analysisTABREZ KHAN
 

Viewers also liked (6)

Interview question for 2g,3g,4g
Interview question for 2g,3g,4gInterview question for 2g,3g,4g
Interview question for 2g,3g,4g
 
Device to device communication
Device to device communicationDevice to device communication
Device to device communication
 
Systesm information layer 3 messages
Systesm information layer 3 messagesSystesm information layer 3 messages
Systesm information layer 3 messages
 
Events in tems products
Events in tems productsEvents in tems products
Events in tems products
 
Tems layer3_messages
Tems  layer3_messagesTems  layer3_messages
Tems layer3_messages
 
WCDMA optimization & Drive test analysis
WCDMA optimization & Drive test analysisWCDMA optimization & Drive test analysis
WCDMA optimization & Drive test analysis
 

Similar to WCDMA Tems Parameters Investigation and Drive Testing

Drive Test and Optimization Tutorial - I.pdf
Drive Test and Optimization Tutorial - I.pdfDrive Test and Optimization Tutorial - I.pdf
Drive Test and Optimization Tutorial - I.pdfhamdi_saif
 
Drive test golden rules
Drive test golden rulesDrive test golden rules
Drive test golden rulesFidele Castro
 
FIELD TESTING of 2G 3G Devices.ppt
FIELD TESTING  of 2G 3G Devices.pptFIELD TESTING  of 2G 3G Devices.ppt
FIELD TESTING of 2G 3G Devices.pptpatrickwang85
 
3 g rf_optimisation_basics
3 g rf_optimisation_basics3 g rf_optimisation_basics
3 g rf_optimisation_basicsMd.Akm Sahansha
 
46640814 3 g-drive-test
46640814 3 g-drive-test46640814 3 g-drive-test
46640814 3 g-drive-testAndri Wahyudi
 
3 g rf_opt_process_ppt
3 g rf_opt_process_ppt3 g rf_opt_process_ppt
3 g rf_opt_process_pptHatim100
 
Nokia kpi and_core_optimization
Nokia kpi and_core_optimizationNokia kpi and_core_optimization
Nokia kpi and_core_optimizationdebasish goswami
 
3 g huawei ran resource monitoring and management recommended
3 g huawei ran resource monitoring and management recommended3 g huawei ran resource monitoring and management recommended
3 g huawei ran resource monitoring and management recommendedMery Koto
 

Similar to WCDMA Tems Parameters Investigation and Drive Testing (20)

Drive Test and Optimization Tutorial - I.pdf
Drive Test and Optimization Tutorial - I.pdfDrive Test and Optimization Tutorial - I.pdf
Drive Test and Optimization Tutorial - I.pdf
 
Drive test golden rules
Drive test golden rulesDrive test golden rules
Drive test golden rules
 
FIELD TESTING of 2G 3G Devices.ppt
FIELD TESTING  of 2G 3G Devices.pptFIELD TESTING  of 2G 3G Devices.ppt
FIELD TESTING of 2G 3G Devices.ppt
 
3 g rf_optimisation_basics
3 g rf_optimisation_basics3 g rf_optimisation_basics
3 g rf_optimisation_basics
 
Drive procedure
Drive procedureDrive procedure
Drive procedure
 
Drive testing in mobile networks
Drive testing in mobile networksDrive testing in mobile networks
Drive testing in mobile networks
 
Drive test
Drive testDrive test
Drive test
 
3 g rf-opt-process.ppt
3 g rf-opt-process.ppt3 g rf-opt-process.ppt
3 g rf-opt-process.ppt
 
3 g scft doc
3 g scft doc3 g scft doc
3 g scft doc
 
46640814 3 g-drive-test
46640814 3 g-drive-test46640814 3 g-drive-test
46640814 3 g-drive-test
 
3 g rf_opt_process_ppt
3 g rf_opt_process_ppt3 g rf_opt_process_ppt
3 g rf_opt_process_ppt
 
Nokia kpi and_core_optimization
Nokia kpi and_core_optimizationNokia kpi and_core_optimization
Nokia kpi and_core_optimization
 
Tems parameters
Tems parametersTems parameters
Tems parameters
 
Wcdma planning
Wcdma planningWcdma planning
Wcdma planning
 
Ijett v4 i10p113
Ijett v4 i10p113Ijett v4 i10p113
Ijett v4 i10p113
 
Tems parameters telebeans
Tems parameters telebeansTems parameters telebeans
Tems parameters telebeans
 
Tems parameters Telebeans
Tems parameters TelebeansTems parameters Telebeans
Tems parameters Telebeans
 
Tems parameter (1)
Tems parameter (1)Tems parameter (1)
Tems parameter (1)
 
Optimization
OptimizationOptimization
Optimization
 
3 g huawei ran resource monitoring and management recommended
3 g huawei ran resource monitoring and management recommended3 g huawei ran resource monitoring and management recommended
3 g huawei ran resource monitoring and management recommended
 

Recently uploaded

Videogame localization & technology_ how to enhance the power of translation.pdf
Videogame localization & technology_ how to enhance the power of translation.pdfVideogame localization & technology_ how to enhance the power of translation.pdf
Videogame localization & technology_ how to enhance the power of translation.pdfinfogdgmi
 
UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7DianaGray10
 
Bird eye's view on Camunda open source ecosystem
Bird eye's view on Camunda open source ecosystemBird eye's view on Camunda open source ecosystem
Bird eye's view on Camunda open source ecosystemAsko Soukka
 
Linked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond OntologiesLinked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond OntologiesDavid Newbury
 
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...UbiTrack UK
 
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCostKubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCostMatt Ray
 
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdfMachine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdfAijun Zhang
 
Designing A Time bound resource download URL
Designing A Time bound resource download URLDesigning A Time bound resource download URL
Designing A Time bound resource download URLRuncy Oommen
 
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsComputer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsSeth Reyes
 
Do we need a new standard for visualizing the invisible?
Do we need a new standard for visualizing the invisible?Do we need a new standard for visualizing the invisible?
Do we need a new standard for visualizing the invisible?SANGHEE SHIN
 
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019IES VE
 
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPAAnypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPAshyamraj55
 
Comparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and IstioComparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and IstioChristian Posta
 
Spring24-Release Overview - Wellingtion User Group-1.pdf
Spring24-Release Overview - Wellingtion User Group-1.pdfSpring24-Release Overview - Wellingtion User Group-1.pdf
Spring24-Release Overview - Wellingtion User Group-1.pdfAnna Loughnan Colquhoun
 
Crea il tuo assistente AI con lo Stregatto (open source python framework)
Crea il tuo assistente AI con lo Stregatto (open source python framework)Crea il tuo assistente AI con lo Stregatto (open source python framework)
Crea il tuo assistente AI con lo Stregatto (open source python framework)Commit University
 
Introduction to Quantum Computing
Introduction to Quantum ComputingIntroduction to Quantum Computing
Introduction to Quantum ComputingGDSC PJATK
 
Nanopower In Semiconductor Industry.pdf
Nanopower  In Semiconductor Industry.pdfNanopower  In Semiconductor Industry.pdf
Nanopower In Semiconductor Industry.pdfPedro Manuel
 
Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™Adtran
 
Cybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptxCybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptxGDSC PJATK
 
Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...
Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...
Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...Will Schroeder
 

Recently uploaded (20)

Videogame localization & technology_ how to enhance the power of translation.pdf
Videogame localization & technology_ how to enhance the power of translation.pdfVideogame localization & technology_ how to enhance the power of translation.pdf
Videogame localization & technology_ how to enhance the power of translation.pdf
 
UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7UiPath Studio Web workshop series - Day 7
UiPath Studio Web workshop series - Day 7
 
Bird eye's view on Camunda open source ecosystem
Bird eye's view on Camunda open source ecosystemBird eye's view on Camunda open source ecosystem
Bird eye's view on Camunda open source ecosystem
 
Linked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond OntologiesLinked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond Ontologies
 
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
 
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCostKubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
KubeConEU24-Monitoring Kubernetes and Cloud Spend with OpenCost
 
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdfMachine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdf
 
Designing A Time bound resource download URL
Designing A Time bound resource download URLDesigning A Time bound resource download URL
Designing A Time bound resource download URL
 
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsComputer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and Hazards
 
Do we need a new standard for visualizing the invisible?
Do we need a new standard for visualizing the invisible?Do we need a new standard for visualizing the invisible?
Do we need a new standard for visualizing the invisible?
 
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
 
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPAAnypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
 
Comparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and IstioComparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and Istio
 
Spring24-Release Overview - Wellingtion User Group-1.pdf
Spring24-Release Overview - Wellingtion User Group-1.pdfSpring24-Release Overview - Wellingtion User Group-1.pdf
Spring24-Release Overview - Wellingtion User Group-1.pdf
 
Crea il tuo assistente AI con lo Stregatto (open source python framework)
Crea il tuo assistente AI con lo Stregatto (open source python framework)Crea il tuo assistente AI con lo Stregatto (open source python framework)
Crea il tuo assistente AI con lo Stregatto (open source python framework)
 
Introduction to Quantum Computing
Introduction to Quantum ComputingIntroduction to Quantum Computing
Introduction to Quantum Computing
 
Nanopower In Semiconductor Industry.pdf
Nanopower  In Semiconductor Industry.pdfNanopower  In Semiconductor Industry.pdf
Nanopower In Semiconductor Industry.pdf
 
Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™
 
Cybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptxCybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptx
 
Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...
Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...
Apres-Cyber - The Data Dilemma: Bridging Offensive Operations and Machine Lea...
 

WCDMA Tems Parameters Investigation and Drive Testing

  • 1. 3G Tems Parameters Investigation and Drive Testing Syed Mohib Hussain (ZTE Engineer Team C-III) Mohib Naqvi
  • 3. What is Drive Test? •The Drive Test is a test performed in cellular networks regardless of technology (GSM, CDMA, UMTS, LTE, etc. ...) usually Performed in order to Analyze and optimize the Network Quality. •Drive Test is used to analyze and optimize the network quality. •Although by the analysis of KPI's we can identify problems of Parametrical Issues e.g. (CDR, Interference, Traffic etc. etc….) while the drive tests allow a deeper analysis in the field. Identifying areas of each sector of coverage, interference, evaluation of network changes and various other parameters. Mohib Naqvi
  • 4. 内部公开▲ Why we Perform Drive Test? • Every alive network needs to be under continues control to maintain/improve the performance. • Optimization is the only way to keep track of the network by looking deep into statistics and collecting and analyzing drive Test data. • Drive Test helps operation and maintenance for trouble shooting purpose. Mohib Naqvi
  • 6. 内部公开▲ Drive Test Tools  Tools used for 3g Drive Testing are enlisted below:  Tems Investigation, Nemo , Probe for WCDMA (Software)  Doungle (License)  User Equipment's (Sonny Ericsson W995)  Data card (3G supported for data testing)  GPS  Scanner  Invertor Mohib Naqvi
  • 7. 内部公开▲ Drive Test Types: The main types of Drive Test are : •Performance Analysis •Integration of New Sites and change parameters of Existing Sites •Marketing •Benchmarking Performance Analysis: Tests for Analysis Performance is the most common, and usually made into clusters (grouping of cells), ie, an area with some sites of interest. They can also be performed in specific situations, as to answer a customer complaint. Mohib Naqvi
  • 8. 内部公开▲ New Site Verification: When the site is completely integrated , Drive tester team will start to perform site investigation. The detailed sub-activities are outlined below: 1.Rigging Audit 2.Site Verification 3.Functionality Test’s 4.Acceptance Test Mohib Naqvi
  • 10. 内部公开▲ Test Performed: Test Performed on a New Roll out site are enlisted below: •Sector Swap •Audio calls •Video calls •R99 •HSPA (HSDPA & HSUPA) •Cell Reselection •IRAT (Inter Radio Access technology) •Soft and Softer Handovers •Coverage Test Mohib Naqvi
  • 11. 内部公开▲ Site Verification: Voice / Video Calls Verify on per Basis for all carriers: •RSCP •Ec/No •Scrambling code •LAC/RAC •Cell ID •Etc etc. Data and Throughput Test: HSDPA / HSPUPA / R99 Verify on per Basis for all carriers: •RSCP •Ec/No •Scrambling code •LAC/RAC •Cell ID •Max & Avg Throughput •Etc etc Mohib Naqvi
  • 12. 内部公开▲ Static Test: Audio Call: Performed number of calls as defined by the operator on all the three sectors of sites in order to determine if any call failure , dropped or blocked is found. Video Call: Just Like Audio Calls number of video calls are also performed on all the three sectors of sites in order to determine if any call failure , dropped or blocked is found. Video call found should be successful. It Takes 64kb/s data to transmit a call. R99: (Release 99) First Step Advancing toward Global 3G network. Can Support data rate up-to 384kb/s and a dedicated channel is allocated for each specific user. Perform Number of R99 Test by making a dial up connection and verify the achieving speed. Mohib Naqvi
  • 13. 内部公开▲ Static Test: HSPA (HSDPA & HSUPA): HSDPA: High Speed downlink packet access is the total speed on a downlink channel Ideally on single carier HSDPA will Provide Data Rate upto 14Mb/s and for Dual carrier as like on Zong It is Providing data Rate upto 42 Mb/s. Large and Huge Data Contained Files are downloaded Via Http or FTP to perform this test. On Zong Minimum Average Speed for HSDPA Should be more than 9mb/s. Moreover HSDPA used Dedicated Shared channel. One Channel shared with number of users. HSUPA: High Speed Uplink packet access is the total speed on a uplink channel Ideally on single carrier HSUPA will Provide Data Rate upto 5Mb/s and for Dual carrier as like on Zong It is Providing double than that/ Large and Huge Data Contained Files are uploaded Via Http or FTP to perform this test. HSUPA always used E-DCH Channel. Mohib Naqvi
  • 14. 内部公开▲ Cell Reselection: • This test is performed to check weather our cell is camping to better serving cell or not in Ideal mode while moving from one node B to another or one Sector to another. • Specific Threshhold level will be adjusted for this parameter. It Commonly depends upon the RSCP and EcNo. Mostly If EcNo Exceeds <-14 it will Reselect a new cell. • Forcefully Test: WCDMA to forcefully on GSM from Inter Radio access technology option and then Back to WCDMA Ue should not exceeds from 2secs while reselecting a WCDMA cell from No Service mode to RRC Eastablished. Mohib Naqvi
  • 15. 内部公开▲ Inter Radio Access Technology (IRAT): Inter Radio Access Technology Test Tells us in case we are in dedicated mode and some where coverage levels of WCDMA are degraded or we are coming out from the coverage area of WCDMA then our call instead of Dropping simply switched on to a GSM Network. Same like in this test we will check weather our cell is properly mapped with 2G desired cell and MSC or not and is properly switching to GSM or not. Mohib Naqvi
  • 16. 内部公开▲ Handovers: Types of Hand over: 1.Soft Hand over: Make Before break. Between two Node B’s at a time connecting with number of cells and first of all making the connection with better serving cell then release. 2.Softer Handover: Make Before break. Between different sectors of the same Node B and first of all made the connection with better serving cell then release. 3.Hard Handover: Break before make. Intra frequency handover in WCDMA. Mohib Naqvi
  • 17. 内部公开▲ Sector Swap: • Sector Swap is one of the major Test in GSM,CDMA,UMTS,LTE… Drive Testing. • In WCDMA 3g Sites we commonly faced a complete swap in a new roll out site. • Sector Swap in Telecom means If you are standing in the coverage Area of Sector 1st but you are going to be served with 2nd sector and same like if you are standing in- front of sector 2nd and serving cell you measures will be showing the results of sector 1st and same as In front of 3rd Sector you will be served by sector 2nd . • Here it shows abnormal behavior of the network. • By sector swap quality should be degraded and as a results Drop calls and level of interference should increase up to its extent. Mohib Naqvi
  • 18. 内部公开▲ Coverage Test: • Coverage Test is used to analyze the network by monitoring RSCP, EcNo, CQI, SIR, BLER etc etc. • Coverage holes and others Missing or Detective Neighbors Information can be also measured. • Block calls , Drop calls, Interference , PS Attach Successful and Failure and other abnormal event can also be monitored. • Different Colour Coding shows the Ranges of different Parameters. • Map Info Tool is commonly used to Plot the ranges of Power and Interference by using Thermatic. Mohib Naqvi
  • 19. 内部公开▲ Radio Parameters: • CPICH EcNo • CPICH RSCP • Tx Power • UTRA Carrier RSSI • SIR • Target SIR • SQI • RRC State • Mode Mohib Naqvi
  • 20. 内部公开▲ Radio Parameters: CPICH Ec/No: Chip Energy by Noise. Common Pilot channel EcNo is the ratio of the energy of the chip and the combined power of all the signals including the specific pilot channel. It also shows the level of Noise disrupting the specific CPICH. Ranges for EcNo: 0 to -7 Good -7 to -10 Acceptable -10 to -36 Bad CPICH RSCP: Received signal Code Power is the level of the signal received by the U.E. or in simple RSCP is the total power of the entire cell or a specific Common Pilot Channel received by the user Equipment. Ranges of RSCP: -30 to -75 Good -75 to -85 Acceptable -85 to -140 Bad Mohib Naqvi
  • 21. 内部公开▲ Radio Parameters: Tx Power: Tx Power is the transmitting power of the mobile station. Its value can vary from 50 to -50. The minimum the Tx Power of the mobile station the better it is for call quality. Tx Power is the power of mobile station only measured in the dedicated mode and commonly mobile will support the call in case when you are in a low coverage area it will increase its own power to support your call avoiding Droped. RSSI: Received Signal Strength Indicator is the total power of the entire common pilot channel received by the Mobile station Including Neighbours interference and noise as well of Neighbours and it self also. RSSI= RSCP + EcNo RSSI Ranges: 0 to -75 Good -75 to -85 Acceptable -85 to -140 Bad Mohib Naqvi
  • 22. 内部公开▲ Radio Parameters: SIR: Signal to Interferance ratio is the ratio of energy in the DPCC ( Dedicated Physical control channel) to that of the interferance and noise received by the User Equipment. Target SIR: It is the target signal to interferance ratio that Mobile Equipment is supposed to achieve by increasing or decreasing its power. It is usually Set by the use of Power Control Procedure. Mohib Naqvi
  • 23. 内部公开▲ Radio Parameters: SQI: It is the speech quality index which is a parameter to rate the voice quality on that particular call. It ranges from 0 to 30. while 30 being the Best Value. Adaptive Multi Rate (AMR) is also used to enhanced the speech or the voice quality of the specific call. WCDMA use AMR Sourc Coding. AMR vary with different Ranges Highest AMR Value is 12.20 and lowest AMR value is 4.75. RRC State: It tells the current state and channel as in idle or dedicated. Mode: It is the Mode that We are Using Weather GSM or WCDMA. Mohib Naqvi
  • 24. 内部公开▲ Serving and Active Set + Neighbour: Cell I.D: This is the Identity or name given to a particular Node B and its cells by the operator. UARFCN: Universal Absolute radio Frequency channel Number is the frequency band allotted to the operator. One Spectrum band width is of 5MHz in WCDMA or 3G. Frequency for Uplink allotted to all the operators vary between 1920 to 1980 MHZ. While Frequency for Downlink allotted to all the operators vary between 2110 to 2170 MHZ. Mohib Naqvi
  • 25. 内部公开▲ Serving and Active Set + Neighbour: Cell Name: Specific Name of the Node B alloted by the Operator according to its location and Serial value. Scrambling Codes: Scrambling Codes are usually used to identified different cells of a node B. They are of Two types. 1- Secondary Scrambling Code 2- Primary Scrambling Code Secondary Scrambling Code: Used in a Beam forming case. Primary Scrambling codes: (0 to 511) Are actually the Scrambling codes usually used to identified different sectors. They totally lies from 0 to 8191. More over 512 PSC are divided into a group of 64.Each contains 8PSC. Total Down link Scrambling Codes 16*8=512. Mohib Naqvi
  • 26. 内部公开▲ Serving + Neighbours AS: Set of Scrambling codes on which the user equipment is currently latched on and there can be at least maximum three scrambling's codes in a Active Set. MN: Neighbor cell that is detected by user equipment as a neighbor. Soft and Softer Handover decision should be taken by measuring the Stronger RSCP and EcNo then that of Active Set at least 32 Neighbor cells can be added in a single 3g site. DN: It is also the neighbor cell which is detected by the U.E but is not defined in our network. Hence the U.E does not handover onto these cells. It can be because of Overshooting, incomplete neighbor list or in case of a new site, It is very important to optimize a network and have no DN’s as they are one of the major reasons of call drops in 3G. Mohib Naqvi
  • 27. 内部公开▲ HSPA and GSM Line Chart: • This window gives us the data speed for both 2G and 3G depending on the mode of user equipment. • RLC DL Throughput ---- This is the total throughput on the downlink at that particular point. • You will find throughput values in Kb/s. • RLC DL Throughput average should be more than 9mb/s. Mohib Naqvi