2. Moveable objects in a room that is used for sitting, function, and for
decoration. Furniture make a room more comfortable for those in it.
Helps us to hold objects form ground
Supports human body to relax
Can be used for storage purpose
Helps us to decorate a room
Makes a room comfortable for living
5. Timber is received from timber
storage area and then checked
properly
After that timber is measured to
ensure sizes and moisture content in
between 12-15% as it is mandatory
for timbered furniture
manufacturing
Each bundle of timber is documented
/ listed and sent to production floor
for furniture manufacturing process
6. Timber is selected from the timber
bundle and every piece of timber is
carefully cut cross wise
Sized timber is then bundled on
pallets after cutting.
Then it is processed at molding
section to achieve the required
shapes and sizes for furniture
manufacturing
After that, these are bundled again.
Documentation and identification of
every bundle is properly done here.
7. Molded timber is processed by
different wood working machines
depending on its shape and design to
obtain its features.
After that, these components are
sanded properly to round all sharp
edges and to smooth surface of the
timber.
8. Each component is being assembled
according to drawing & design to
figure the part of the planned
furniture.
All joints are glued together to form a
strong bond. In some cases, wooden
dowel pin is used to join two parts of
furniture. After that, assembled parts
are stacked together and labeled for
future identification
9. Assembled parts are then dipped into
teak oil for some time and wiped dry
to get the brown/teak finishing.
Teak oil acts as anti-insect, anti-
fungus as well as teak oil provide a
weather coat and UV resistant to the
wood.
After dipping into teak oil for some
and wiping out and drying, they are
inspected again before being packed
into carton boxes.
10. Finished furniture is loaded into
vehicles/containers according to
customer’s order.
These containers are then shipped
out through vehicle or ship to
different customers of all over the
world
11. Used to cut Veneer Board / Furnitex
board according to required sizes to produce flat
paneled wooden furniture.
Used to make curve shaped or profile shaped
wooden part precisely as per drawing. It will work as
per drawing provided in its language (machine
language/CAM) which can be in 2D or 3D.
12. Used to get smooth edge of sized panel. Also used
to mold (required shape as per drawing) the edge of
Panel/Board. Sized panel can be grooved too.
Used to cover the edge of veneer board or MDF
board with Veneer Edging (in case of Straight Part).
13. Used to cover edge of veneer board or MDF board
with Veneer Edging in case of Curved/Profile
shaped panel part
Mainly, it is used for drilling/boring operation for
knock down furniture manufacturing.
14. Used to obtain required thickness of timber
for furniture manufacturing.
Used for cross cutting of timber.
Used to turn timber to get different tone shape for
furniture manufacturing.
15. Used to get different shapes in the timber for
wooden furniture manufacturing. V-Shape, U-
Shape, L-Shape and many other shapes can be
obtained with this machine.
Upgraded version of Spindle Molder. It saves
time of changing cutters. Also, more shapes can
be obtained at a time than spindle molder.
16. Used to sand surface of timber or veneer board
to get smooth surface before lacquer
application or polishing.
Used to sand of profile shaped wood for
furniture manufacturing.