3. Definition:-
IoT tries to establish advanced connectivity (with the aid of
internet) among the device or systems or services in order
to little by little make automation in all areas.
1) The first presence of IoT was felt through the ATM’s, and
goes as back as the year 1974.
2) The year 2016 was estimated to have 4.9 billion
connected things and it is predicted that by the year 2020
, the connected devices will reach or even exceed 50
billion.
3) Google bought smart thermostat maker, Nest Labs ,for
$3.2 billion, and Samsung purchased connected home
company SmartThings for $200 million
4. Scope of IoT:-
1.Building and Home Automation:-
It is related to everything in home which have the potential to
• monitor and remote control such as air condition, security
lock lightening, heating, ventilation, telephone system, TV
to make a comfort , secure, with low energy consumption
2.Health Care systems:-
Health care Systems helps to improve patient state better by
monitoring and controlling their heart rate or blood pressure or
even for their diet. Smart tablet which show us how much does
with which gradient can helps patient to get better
3.Infrastructure Management:-
Infrastructure Management is useful for monitoring and tracking
if there is any problem in urban or rural Infrastructure such as
bridges, railway lines or etc. to diminish and reduce risk of
danger and any failure in strength would be tested and alarm as
soon as possible to repair it.
5. Components of IoT:-
The internet of things (IoT) is
the network of physical
devices, vehicles, buildings and
other items, which are
embedded with
i)electronics,
software,
ii)Sensors
iii)actuators,
network connectivity that
enable these objects to collect
and exchange data.
6. Hardware Requirements for
IoT:-
1.Aurdino Uno (one of the many Aurdino boards available)
Arduino Uno has
14 digital
input/output pins
6 analog inputs,
a 16 MHz quartz
crystal,
a USB connection,
a power jack,
an ICSP header,
a reset button.
7. Specifications of Arduino Uno :
Microcontroller ATmega328P
Operating Voltage 5V
Input Voltage (limit) 6-20V
Digital I/O Pins 14 ( 6 provide PWM output)
PWM Digital I/O Pins 6
Analog Input Pins 6
DC Current per I/O Pin 20 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328P)
SRAM 2 KB (ATmega328P)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm
8. Software components :-
The IDE which is required for Arduino Uno is Arduino IDE. It is an
open software, freely provided by the Arduinocommunity.
Arduino Uno works on programming language embedded C, which
is similar to C.
The Arduino Integrated Development Environment – or Arduino
Software (IDE) - contains
a text editor for writing code,
a message area,
a text console,
a toolbar with buttons for common functions and
a series of menu.
11. This work combines the effort and knowledge of the persons
working on it. The document would not be successful , without
the guidance of the honorable resource person and support
by the other well wishers. The document fulfills the norms of
paper presentation. And I feel optimum amount of information
was covered in the document. I personally seek apologies ,if I
hurt their feelings. The content for the presentation was
derived from various sources listed below:-
www.wikipedia.com
www.googleimages.com
From the works of Mr. Vijay Kumar s
