To buy a metal baler, you may have to choose the bale shape, press box size and bale out type. Meanwhile, the welds, steel plate, lining plate and hydraulic station of the machine should be noted.
BAGALUR CALL GIRL IN 98274*61493 ❤CALL GIRLS IN ESCORT SERVICE❤CALL GIRL
How to Buy a Metal Baler
1. Website: http://www.metalrecyclingmachines.com
Email: info@metalrecyclingmachines.com
How to Buy a Metal Baler
Key words: metal baler,scrap metal baler for sale,metal baling machine,metal
baling press,metal baler for sale,scrap baling press manufacturers,hydraulic
baler machine for sale,hydraulic baling press manufacturers
Metal baler finds wide application in steel mills, metal recycling and processing
industry, and metal smelting industry. Using metal baler to extrude various
metal scrap into bales can reduce storage space and transportation cost,
meanwhile increase feeding speed. To buy a metal baler, there are a few tips
to be noted.
Choose the Machine
Bale Shape
The metal baler usually has three bale shapes, cuboid, octangle and cylinder.
Cuboid bale is the most common type in the hydraulic market. It is the
cheapest bale type while cylinder type is the most expensive. What should be
noted is that cuboid bale is slightly restricted to the furnace mouth. If you want
2. the bale to be more beautiful, octangle type or cylinder type is at your option.
Press Box Size
Usually the press box of the baler has a fixed dimension. We can also
customize the size to suit for your specific requirements for storage and
transportation.
Bale Out Type
The baler has three bale out types, turn-out, front-out, and side-out.
* Turn-out is the most popular type. It is the first choice for small metal baler.
* Side-out type is mainly used for large metal baler.
Note:
1. Turn out type is not suitable for large metal baler, as the bale of large baler is
usually with large size and heavy weight, which can break the turning cylinder
easily after frequent operation.
2. Some models can be either turn-out or side-out type, while side-out is
usually with a higher cost.
* Front-out type has a large bale, yet the density is not high. This type is
suitable for light materials like aluminum cans.
3. Check the Machine
Machine Body
1. The welds
The welds at the stressed area of the steel plate should be beveled with the
angle of 45°. They should be level and even with no rosin joint or bubble.
Meanwhile there should be no welding slag residues.
2. Steel plate
The thickness of the steel plate decides the stability and safety of the metal
baler. We adopts steel plate with different thickness on the different stressed
areas of the metal baler, while the most stressed area adopts the thickest rib
plate with the largest density.
3. Lining plate
Inside the baler there are assembled lining plates with high hardness to protect
the baler from abrasion, thus prolong the service life of the baling machine.
Hydraulic Station
The hydraulic station provides power for the baling press. When buying a
metal baler, start the machine and listen to check if there is loud noise. Check if
the oil tank is clean and make sure there are no welding slag residuals.
4. Metal baler has large economic value and environment value. It can increase
work efficiency as well as benefit the environment and energy use. If you are
interested in buying metal baler, you can rely on us for the wide selection.